NEW
Font size
WorksheetsCAD I Final Review
Total questions: 48
Worksheet time: 28mins
What is the purpose of using layers in AutoCAD?
To change the drawing color
To create 3D models
To connect to the internet
To better organize information
What does the polar array function do?
Copy objects in a grid pattern
Copy objects in a circular pattern
Copy objects along a path
Copy objects above and below the original
What is the purpose of using blocks in AutoCAD?
To change object colors
To decease file size
To create 3D objects
To reduce complexity
Which command would be used to draw a line 7.5 inches in a given direction at an angle of 20 degrees?
7.5,20d
@7.5,20
7.5<20
@7.5<20
The LINE command in ORTHO mode
draws only horizontal lines
draws only vertical lines
draws only horizontal and vertical lines
draws only digonal lines
A tangent line touches a circle:
at its center
at one point on its curcumference
at many points on its circumference
doe not touch it at all
The file format for CAD drawings is...
.jpg
.dwg
.bmp
.doc
The default radius for the fillet command is 0
True
False
Rectangles, polygons, and donuts are polylines
True
False
A line can be assigned a width
True
False
A line can be converted into a polyline
True
False
What type of line is this?
Border line
Short-Break line
Hidden line
Object/Visible line
What type of line is this?
Object line
Center line
Hidden line
Dimension line
What type of line is this?
Construction line
Leader line
Extension line
Dimension line
What type of line is this?
Cutting Plane line
Section line
Hidden line
Short-Break line
What type of line is this?
Dimension line
Construction line
Hidden line
Extension line
What type of line is this?
Cutting Plane line
Center line
Hidden line
Extension line
What type of line is this?
Center line
Object line
Hidden line
Construction line
Which command creates a reverse copy?
ARRAY
FILLET
MIRROR
HATCH
Which command creates a tangent arc?
Fillet
Extend
Offset
Trim
Which command is used to create concentric lines and parallel curves?
Array
Fillet
Offset
Hatch
Which command is used to create multiple copies of objects in a pattern?
Array
Fillet
Hatch
Mirror
Which command is used to fill an enclosed area or selected objects with a pattern, solid fill, or gradient fill?
Fillet
Hatch
Mirror
Extend
Which command is used to lengthen lines to meet the edges of other objects?
Fillet
Extend
Offset
Trim
Which command is used to shorten lines to meet the edges of other objects?
Extend
Fillet
Trim
Offset
Which command is used to create a circular closed polyine with an assigned width?
Donut
Polygon
Boundary
Polyline
Which command is used to create a closed polyline having between 3 and 1024 sides?
Boundary
Donut
Polyline
Polygon
Which command is used to create a closed polyline using existing objects that form an enclosed area in a drawing?
Boundary
Explode
Polygon
Polyline
Which command creates a series of line and/or arc segments that are connected to create a single drawing object?
Boundary
Rotate
Polyline
Polygon
Which command converts polylines and other associative objects into individual objects?
Explode
Boundary
Polyline
Extend
Which command defines a new user coordinate system for creating and modifying objects?
UCS
OPTIONS
POLYLINE
BOUNDARY
Which command rotates an object around a base point?
Rotate
Copy
Mirror
Explode
Circles are dimensioned based on their...
radius
diameter
Arcs are dimensioned based on their...
radius
diameter
What Type of Drawing is this?
Structural Detail
Mechanical Drawing
Floor Plan Drawing
Site Plan
What type of drawing is pictured?
Front Elevation Drawing
Section Drawing
Site Plan
Floor Plan
An elevation drawing can be described as...
a detailed view of the support structure
a view of the building from the street
a cut away view from about to show each room
a detailed view of a specific part of the building
Which view shows a cut section of a building?
Detail
Elevation
Section
Floor Plan
Where on the Multiview drawing shown is the FRONT view located?
top left
top right
bottom left
bottom right
Which two letters represent the DEPTH of the part?
A and D
B and F
C and E
What is the name of the default layer in AutoCAD that cannot be renamed or deleted?
0
Default
1
Base
Which keystrokes will UNDO a command?
control+z
alt+u
alt+z
control+u
What type of object snap that breaks to the midpoints of lines and arcs and the mid-point of polyline segments?
End-Option
Intersection
Mid-point
Extension
Which command is used to change the size of existing objects?
move
rotate
scale
zoom
What drawing aid is short for orthogonal, which means either vertical or horizontal?
ortho
snap
osnap
grid
