WorksheetsT28CT Ceiling & Internal Finsihes Quiz
Total questions: 15
Worksheet time: 8mins
What is a ceiling?
It is not a structural element
It is an overhead interior surface that covers the upper limits of a room
It is a finished surface concealing the underside of the roof structure or the floor of a story above
It is a type of flooring
Which of the following is NOT a type of ceiling?
Direct Fixed Ceiling
Suspended Ceiling
Retractable Ceiling
Floating Ceiling
What is the purpose of direct fixing clips in a direct fixed ceiling?
To support the weight of the ceiling
To fix along the sections in accordance with the relevant maximum span tables
To provide insulation
To enhance the aesthetic appearance
How should each Furring Channel be spaced in a direct fixed ceiling?
According to the builder's preference
As per the manufacturers' recommendations
At random intervals
Based on the room size
How is the ceiling supported in a suspended ceiling system?
By using heavy steel beams
By using a lightweight hanging frame (grid system 1200mm x 1200mm)
By attaching directly to the roof
By using wooden planks
What is the thickness of the plasterboard used in the ceiling direct fixed details?
10mm
13mm
15mm
20mm
At what spacing are the mild steel strap hangers placed in the ceiling direct fixed details?
1000mm
1200mm
1500mm
1800mm
What is the maximum distance allowed between hanging wires in the given ceiling design?
101 mm
203 mm
12 mm
50 mm
According to the general note, what must the ceiling area with control joint follow?
Vertical bracing requirements
Lateral bracing requirements
Diagonal bracing requirements
No specific requirements
What is the required concrete stress grade at 28 days?
15MPa
20MPa
25MPa
30MPa
What standard should all timber framing comply with?
A.S.1428.1
A.S.1668
A.S.1684
A.S.3660
What should all disabled works comply with?
A.S.1428.1
A.S.1668
A.S.1684
A.S.3660
What standard should mechanical ventilation comply with?
A.S.1428.1
A.S.1668
A.S.1684
A.S.3660
What specification must all materials comply with for early fire hazard indices?
SPEC C1.1 10 of the BCA
SPEC A2.3 15 of the BCA
SPEC B4.2 20 of the BCA
SPEC D3.5 25 of the BCA
What type of mesh should be provided throughout the roof area in accordance with the Occupational Health and Safety Act?
AUSMESH 300
AUSMESH 200
AUSMESH 100
AUSMESH 400
