Font size
S
M
L
XL
WorksheetsBT pt. 2
Total questions: 88
Worksheet time: 44mins
Name
Class
Date
1.
What will you use to paint a Steel Gate of a perimeter fence?
a)
Quick Dry Enamel a.
b)
Latex b.
c)
Duco c.
d)
Acrylic d.
2.
Xyladecor is manufactured by?
a)
Dutch Boy a.
b)
Boysen b.
c)
Rain or Shine c.
d)
Davies Paints d.
3.
This Paint company started its operation in 1953 as a repacker of paint and thinners under the trade name of Columbus. In 1958, they started paint production with the introduction of an economy grade paint called NATION. Finally, in 1960, they obtained a license from Walter N. Boysen Company of Oakland, California, USA to manufacture Boysen Paints in the Philippines. Today, it is one of the world's largest paint manufacturer. What is its "current" Corporate Name?
a)
Nation Paint Manufacturing, Inc. a.
b)
Boysen Philippines, Inc. b.
c)
Pacific Paints (Boysen) Philippines Inc. c.
d)
Pacific Paint & Oil Manufacturing, Inc. d.
4.
Which is best for waterproofing walls and floors?
a)
Xyladecor a.
b)
Elastomeric Paint b.
c)
Latex c.
d)
Red Oxide d.
5.
To avoid chalking of a paint, what should be done?
a)
Buy a new roller a.
b)
New paint b.
c)
Do not paint when humid c.
d)
Put Water d.
6.
Why is acrylic latex considered the most flexible paint?
a)
Can be mixed with any kind of thinner a.
b)
Used in wood, concrete, and steel b.
c)
Interior and exterior, odorless c.
d)
Used as primer d.
7.
What happens when Enamel is applied to metals?
a)
Takes a long time to dry a.
b)
It will not bond b.
c)
It will adhere c.
d)
Blistering d.
8.
A water-based paint that is produced with synthetic acrylic binders. It is durable and resistant to scratches and is ideal for general painting projects on both metallic and non-metallic surfaces.
a)
Alkyd Paint a.
b)
Elastomeric Paint b.
c)
Latex Paint c.
d)
Enamel Paint d.
9.
A paint defect caused by a failure in the paint film where it takes on a cracking pattern of deep relief resembling a reptile’s skin such as that of an alligator.
a)
Blistering a.
b)
Sagging b.
c)
Alligatoring c.
d)
Chalking d.
10.
A paint defect which is identifiable as a fine chalky powder that forms on the surface of a paint film.
a)
Blistering a.
b)
Sagging b.
c)
Checking c.
d)
Chalking d.
11.
A paint defect characterized by the paint peeling and separating from an earlier paint layer (inter-coat peeling) or from the substrate leaving some paint behind.
a)
Blistering a.
b)
Peeling paint due to adhesion b.
c)
Peeling paint due to exterior moisture under paint film c.
d)
Rust discoloration d.
12.
How do you compute for the number of 60 mm x 120 mm of acoustic board on ceiling?
a)
Divide the area by 0.72 a.
b)
Multiply the area by .072 b.
c)
Divide the area by 2.88 c.
d)
Add the area and subtract .072 d.
13.
Refer to the figure above, which hardware can be specified for entrance canopy?
a)
Figure E a.
b)
Figure B b.
c)
Figure C c.
d)
Figure A d.
14.
Refer to the figure above, which hardware can be specified for tempered glass?
a)
Figure B C D a.
b)
Figure C D E b.
c)
Figure A B D E c.
d)
All shown d.
15.
Refer to the figure above, which hardware is structurally appropriate for laminated glass?
a)
Figure A a.
b)
Figure B b.
c)
Figure D c.
d)
Figure E d.
16.
Refer to the figure above, which hardware can be specified for a large glass wall?
a)
-
b)
-
c)
-
d)
-
17.
Refer to the figure above, which hardware can be specified for annealed glass?
a)
Figure C a.
b)
Figure E b.
c)
Figure D c.
d)
NOTA d.
18.
Identify 9.
a)
Cylinder tumbler a.
b)
Shank b.
c)
Cylinder lock c.
d)
Rose d.
19.
Identify 3.
a)
Strike plate a.
b)
Keyhole b.
c)
Cylinder lock c.
d)
Rose d.
20.
Identify 1.
a)
Faceplate a.
b)
Keyhole b.
c)
Cylinder lock c.
d)
Lock button d.
21.
Identify 6.
a)
Strike plate a.
b)
Shank b.
c)
Cylinder lock c.
d)
Mounting plate d.
22.
Identify 7.
a)
Strike plate a.
b)
Outer plate b.
c)
Cylinder lock c.
d)
Faceplate d.
23.
Identify 2.
a)
Rose a.
b)
Keyhole b.
c)
Cylinder lock c.
d)
Up lock d.
24.
Identify 5
a)
Strike plate a.
b)
Shank b.
c)
Cylinder lock c.
d)
Rose d.
25.
Identify 4.
a)
Strike plate a.
b)
Interior knob EXTERIOR b.
c)
Cylinder lock c.
d)
Mounting plate d.
26.
Which hardware can be used for uPVC window?
a)
Figure B and C a.
b)
Figure D b.
c)
Figure C and D c.
d)
Figure C d.
27.
Which hardware can be used for a wooden window?
a)
Figure A a.
b)
Figure C and D b.
c)
Figure A and E c.
d)
Figure E d.
28.
Which hardware can be used for curtain wall windows?
a)
Figure D a.
b)
Figure C b.
c)
Figure B c.
d)
NOTA d.
29.
Which hardware can be used for screen windows?
a)
Figure B a.
b)
Figure C b.
c)
Figure E c.
d)
Figure D d.
30.
Which hardware can be used for aluminum windows?
a)
Figure D and E a.
b)
Figure D b.
c)
Figure C c.
d)
Figure C and D d.
31.
The figure at the right is normally used for?
a)
a. Sliding door
b)
b. Cabinet
c)
c. Window
d)
d. Cabinet door
32.
The figure at the right is normally used for?
a)
a. Sliding door
b)
b. Cabinet door
c)
c. Casement window
d)
d. Cabinet door
33.
Based on the figure above, which woodworking equipment is a jigsaw?
a)
Figure D a.
b)
Figure B b.
c)
Figure A c.
d)
Figure E d.
34.
Based on the figure above, which woodworking equipment is a circular saw?
a)
Figure A a.
b)
Figure B b.
c)
Figure C c.
d)
Figure E d.
35.
Based on the figure above, which woodworking equipment is a bench drill press?
a)
Figure A a.
b)
Figure C b.
c)
Figure D c.
d)
Figure E d.
36.
Based on the figure above, which woodworking equipment is a router?
a)
Figure D a.
b)
Figure C b.
c)
Figure B c.
d)
Figure A d.
37.
Based on the figure above, which woodworking equipment is a belt sander?
a)
Figure D a.
b)
Figure C b.
c)
Figure A c.
d)
Figure B d.
38.
Based on the figure above, which is also known as Philippine ebony?
a)
Molave a.
b)
Narra b.
c)
Kamagong c.
d)
Yakal d.
39.
For preliminary design of solid wood, limit beam span to a maximum of meters.
a)
3 a.
b)
10 b.
c)
8 c.
d)
6 d.
40.
Any of a number of wooden strips laid upon concrete slab to provide a means of attaching a subfloor or flooring?
a)
Sleeper a.
b)
Parquet b.
c)
Wood flooring c.
d)
Strip flooring d.
41.
Which among the selection is also called chipboard?
a)
Medium density board a.
b)
Fiberboard b.
c)
Particle board c.
d)
Waferboard d.
42.
The actual widths of solid timber are less than nominal size by mm.
a)
5” a.
b)
18 MORE THAN 6” b.
c)
6 LESS THAN 2” c.
d)
12 d.
43.
In the Philippines, what is the unit used to sell lumber?
a)
Even numbers in meters a.
b)
Odd numbers in feet b.
c)
Even numbers in feet c.
d)
Odd numbers in meters d.
44.
Which among the choices is softwood?
a)
Tanguile a.
b)
Yakal b.
c)
Molave c.
d)
Teak d.
45.
Name the type of wood joinery.
a)
a. End joint
b)
b. Finger Joint
c)
c. Edge Joint
d)
d. Dovetail
46.
What tree is considered as a conifer?
a)
Softwood a.
b)
Hardwood b.
c)
Herbs c.
d)
All of the above d.
47.
What adhesive is used to connect wood board to concrete?
a)
Bolt a.
b)
Liquid nail b.
c)
Dowel c.
d)
Rivet d.
48.
How many marine plywood would you use for 5 m x 7 m master bedroom ceilings?
a)
20 pcs a.
b)
13 pcs b.
c)
26 pcs c.
d)
15 pcs d.
49.
What is the standard size of marine plywood?
a)
1.20 M X 3.00 M a.
b)
1.20 M X 2.40 M b.
c)
1.30 M X 3.00 M c.
d)
2.30 M X 4.20 M d.
50.
Which of the following is not a millwork?
a)
Chair handles a.
b)
Cornice b.
c)
Dresser c.
d)
Steel railings d.
51.
How are you going to put ¾” thick plywood on an uneven surface?
a)
Angle bur plus plywood a.
b)
Liquid nail b.
c)
Concrete nail c.
d)
Not possible d.
52.
It is from coniferous trees (needle-like leaves) that has uninteresting
a)
Hardwood a.
b)
Softwood b.
c)
Lumber c.
d)
Engineered wood d.
53.
It is from deciduous trees (broad seasonal trees) which produces interesting grain and is suitable for decorative application.
a)
Hardwood a.
b)
Softwood b.
c)
Lumber c.
d)
Engineered wood d.
54.
You want to protect your wooden deck but at the same time you don't want to hide the beauty of the wood. What should you do?
a)
Paint it brown a.
b)
Staining b.
c)
Use bleach to remove mildew and mold c.
d)
Use sandpaper and seal cracks d.
55.
It is a type of fiberboard which is made from wood fibers glued under heat and pressure. It is dense, flat, stiff, has no knots and is easily machined. It's fine particles provide a material without a recognizable "grain".
a)
HDF a.
b)
OSB b.
c)
MDF c.
d)
Particle Board d.
56.
What is a projecting beam fixed only at one end while the other end has no support?
a)
Single supported a.
b)
Cantilever b.
c)
Overhanging c.
d)
Continuous d.
57.
What is a beam that goes horizontally over a door?
a)
Door header a.
b)
Lintel beam b.
c)
Door beam c.
d)
Header beam d.
58.
What is a type of column where a continuous helical bar is wrapped around the structure?
a)
Spiral a.
b)
Helical b.
c)
Tied c.
d)
RC d.
59.
What is a beam either below or above ground used for connecting two structural members to keep them from spreading apart?
a)
Lally beam a.
b)
Plinth girder b.
c)
Connection beam c.
d)
Tie beam d.
60.
Why are inverted beams used?
a)
To minimize cracking on the surface of the beam a.
b)
For architectural effects b.
c)
For added strength in cantilevered roof c.
d)
To allow for headroom clearance d.
61.
Identify figure E. It is widely available and made from organic materials?
a)
Cob block a.
b)
Adobe b.
c)
Banco block c.
d)
Mudbrick d.
62.
Identify Figure A. It is commonly used in gardens as stepping stones and floor finishes?
a)
Pan de unan stone a.
b)
Cobblestone b.
c)
Piedra china c.
d)
Escombro d.
63.
Identify figure D. It is available in a variety of sizes, shapes and colors commonly used in accent walls?
a)
Adobe stone a.
b)
Travertine b.
c)
Woodstone c.
d)
Onyx d.
64.
Identify figure B. It is a kind of white coral stone used in residential walls?
a)
Yellow slate a.
b)
Ibiza slate b.
c)
Mactan stone c.
d)
Fossil reef stone d.
65.
Identify figure C. It is widely known in Negros and popularly used on both floors and walls?
a)
Green slates a.
b)
Araal slate b.
c)
Coral stone c.
d)
Onyx stone d.
66.
What is the item E which is considered environmentally friendly paving material?
a)
Natural stone paver a.
b)
Rubber paver b.
c)
Clay brick paver c.
d)
Concrete paver d.
e)
s
67.
What is the material used to fill the gap between mosaic tiles in item B?
a)
Lime a.
b)
Adhesive b.
c)
Cement c.
d)
Grout d.
68.
What kind of paving materials is most suitable for an outdoor playground as shown in item D?
a)
Concrete paver a.
b)
Rubber paver b.
c)
Natural stone paver c.
d)
Clay brick paver d.
69.
What is item C which is 100% manufactured paving materials?
a)
Brick paver a.
b)
Natural stone paver b.
c)
Rubber paver c.
d)
Concrete paver d.
70.
What type of tile is item A used primarily on toilets and swimming pools?
a)
Glass mosaic a.
b)
Vitrified mosaic b.
c)
Slate mosaic c.
d)
Ceramic d.
71.
The steel frame connection in figure E is called a .
a)
Simple connection a.
b)
Coped connection b.
c)
Seated connection c.
d)
Framed connection d.
72.
The steel frame connection in figure B is called a .
a)
Simple frame a.
b)
Seated connection b.
c)
Framed connection c.
d)
Simple frame connection d.
73.
The steel frame connection in figure D is called a .
a)
Coped connection a.
b)
Simple connection b.
c)
Simple frame connection c.
d)
Seated connection d.
74.
The steel frame connection in figure A is called a .
a)
Seated connection a.
b)
Coped connection b.
c)
Seated connection c.
d)
Simple connection d.
75.
The steel frame connection in figure C is called a .
a)
Coped connection a.
b)
Simple connection b.
c)
Framed connection c.
d)
Simple frame connection d.
76.
What is not a characteristic of stainless steel?
a)
Galvanized a.
b)
Higher corrosion resistance b.
c)
Higher ductility c.
d)
Lower maintenance d.
77.
The best steel section material for exposed truss?
a)
Tubular a.
b)
Angle bar b.
c)
Round bar c.
d)
C-channel d.
78.
A steel section which is commonly used for skylight.
a)
Tubular a.
b)
Angular b.
c)
C-channel c.
d)
Wide flange d.
79.
Which of the following is not a type of stainless-steel finish?
a)
Satin a.
b)
Mirror b.
c)
Matte c.
d)
Bead blast d.
80.
What type of stainless steel is good for railings?
a)
Glossy a.
b)
Painted b.
c)
Hairline c.
d)
Primed d.
81.
If you want to have an exposed truss system for your roof, which steel section would be best to use?
a)
Tubular a.
b)
C-channel b.
c)
I-beam c.
d)
Angular d.
82.
It is a Hot rolled steel that has been further processed by being allowed to cool at room temperature and annealed, or temper rolled.
a)
Hot Rolled Steel a.
b)
Cold Rolled Steel b.
c)
Ingot c.
d)
Billet d.
83.
Which of the following is not an advantage of Cold Rolled Steel?
a)
Smooth, finished surfaces a.
b)
Harder and Stronger than Hot Rolled Steel b.
c)
Aesthetically pleasing finish c.
d)
Cheaper than Hot Rolled Steel d.
84.
It is a construction technology that uses cold-formed steel as the primary construction material. It can be used for the following building systems.
a)
Light gauge steel construction a.
b)
Hot Steel Construction b.
c)
Heavy Steel Construction c.
d)
Open web steel construction d.
85.
Which of the following is the most frequently used steel section?
a)
Round pipes a.
b)
Square tubing b.
c)
Rectangular tubing c.
d)
Wide flange d.
86.
These are lightweight, shop-fabricated steel members having a trussed web. They provide an economical alternative to steel beams for light to moderate distributed loads, especially for spans greater than 10 meters.
a)
Trusses a.
b)
Open Web Steel Joists b.
c)
Rigid frames c.
d)
Angular Trusses d.
87.
It is a very light metal with a specific weight of 2710 kg/m3, about a third of Steel, has High Corrosion Resistance, High Electrical and Thermal Conductivity, Recyclability - can be re-melted with minimal energy requirement
a)
Steel a.
b)
Aluminum b.
c)
Chrome c.
d)
Powder coated metal d.
88.
It is a Hard, brittle and non-malleable iron-based alloy that Contains 2.0% to 4.5% carbon and 0.5% to 3% silicon.
a)
Cast Iron a.
b)
Wrought Iron b.
c)
Carbon Steel c.
d)
Mild Steel d.
Reset