It is a receptacle or vault used to collect organic waste discharged from the house sewer.

The semi-liquid substance accumulated at the bottom of the septic tank.

An underground tunnel that carries off the drainage and waste matter from a home or town is called:

The pipe that conveys waste from various fixture other than from the water closet.

It is a fitting or device that provides liquid seal to prevent the back passage of air.

The tools used to tighten or loosen hexagonal fittings like unions and other metal fittings.

The kind of fitting used to connect fixed pipe and fixtures is a ________.

A fitting or device installed at the inlet of a water pump to prevent backflow of water.

It is a device installed in water lines that can be closed or opened to allow installation or troubleshooting of fixtures.

A schedule 40 pipe is:

What material is used to seal off threaded fittings to avoid leakage?

What must be installed to prevent siphonage or backflow of the water seal in the drainage system?

Which of the following is NOT required by the National Plumbing Code?

What is the ideal inclination of a horizontal waste pipe as recommended by the National Plumbing Code?

For purposes of troubleshooting in case of stoppage of flow, what must be installed in the pipe system?

Plastic pipes are commonly used in water fixture installation nowadays. Which of the following is preferred?

The Plumbing Code on House Drain provides that there must be no more than two closets that shall discharge into a ________ pipe diameter.

A metal or plastic fitting used to connect smaller pipe from a larger pipe.

As a basic prerequisite for most plumbing project, what should be connected for each faucet, toilet, and fixtures?

A plumber wants to tighten and loosen pipes. Which tool is appropriate?

A plumber wants to cut metal pipe. Which tool is appropriate?

Metal with semi-rigid auger whose end is usually fitted with a hook or corkscrew is called ________.

If your toilet has trouble, you use rubber funnel-shape instrument attached to the end of the handle for unblocking. What is this tool?

Which plumbing tool is used for gripping large pipes and irregular objects?

A plumber wants to create thread outside pipe by hand. Which tool is appropriate?

 A plumber wants to cut pipes. Which holding tool is needed?

A plumber wants to hold pipe by hand. What tool is needed?

The following are good plumbing practices, EXCEPT:

Water contaminants are being forced back into the water piping system. Which term is referred to?

The following are examples of plumbing fixtures, EXCEPT:

Which statement is NOT true about plumbing standards based on Republic Act 1378 which is known as "Plumbing Law"?

A compartment that receives solid or liquid waste, located below the normal grade of the gravity system is called ________.

Which is true about toxic substance?

Water that is safe for drinking, cooking, and personal use is ________.

Which among the following best describes a toilet bowl?

Plumbing ventilation means to ________.

Rainwater from the roof down to the ground passes through what pipe?

A pipe that conveys only liquid waste is called ________.

If you install water supply inside the building, what is the diameter of pipes needed?

In which type of pipes does portable water travel

If your water system has leak, where can you shut off the flow of water?

A plumber wants to install a liquid seal to prevent sewer gasses from entering the building. What device is needed?

A plumber wants to shut off the flow of water just 90 degrees turn. Which valve is appropriate?

What do you call those flexible waterproof ribbon for covering threaded pipes joints to prevent leakage?

If the end of a PVC pipe is fitted with a male adopter, what fitting will be used to stop the flow of the water?

How many PVC pipes can be installed in a 7.50 meter distance?

If the end of the PVC pipe is fitted with a female adopter, what fitting will be used to stop the flow of the water?

A plumber wants to connect two length of pipes. Which fitting is necessary?

If there is leaking in the water supply of lavatory, sink, and water closet, which valve are you going to shut off?

If you install a soil pipe, what is the standard pitch or slope?

If you put source of potable water, what is the minimum safe distance from the septic tank?

No cesspool, septic tank or drain fields shall be located within how many meter radius from the well?

If you plan to drill for a well that can supply water for public use, what is the minimum meter radius from a well to the residences?

Every trap for bath tubs, lavatories, sink, and other similar fixture shall be _________.

There should be no concrete sanitary sewers existing within how many meter radius from the well?

The standard length of a PVC pipe is _________.

If you want to estimate the number of G.I. pipes needed from your house to the main supply, what is the standard length of a G.I. pipe that you are going to use?

If you want to estimate the number of PVC pipes needed from your house to the main supply, what is the standard length of a PVC pipe that you are going to use?

All plumbing fixtures must have P-trap, EXCEPT: