NEW
Font size
WorksheetsHeating Systems Regulations Quiz
Total questions: 74
Worksheet time: 37mins
Which regulation focuses on the conservation of fuel and power?
BS EN 12828
BS EN 14336
Building Regulations part L
BS 4422
What does BS EN 12828 pertain to?
Installation and commissioning of water based heating systems
Design of water based heating systems
Manufacture of radiators
Central Heating Efficiency System Specification
BS EN 14336 is related to which of the following?
Manufacture of radiators
Design of water based heating systems
Installation and commissioning of water based heating systems
Central Heating Efficiency System Specification
Which standard is associated with the manufacture of radiators?
BS EN 12828
BS EN 14336
BS 4422
CHeSS
What does CHeSS stand for?
Central Heating Efficiency System Specification
Central Heating Energy Saving System
Central Heating Efficiency Standard Specification
Central Heating Energy Standard System
Which part of the Building Regulations deals with the conservation of fuel and power in new dwellings?
L1a
L1b
L2a
L2b
What does L1b in the Building Regulations part L refer to?
In new dwellings
In existing dwellings
In new, other than dwellings
In existing, other than dwellings
Which section of the Building Regulations part L applies to new buildings other than dwellings?
L1a
L1b
L2a
L2b
What does L2b in the Building Regulations part L refer to?
In new dwellings
In existing dwellings
In new, other than dwellings
In existing, other than dwellings
What guide is mentioned in the document related to Building Regulations part L?
Domestic Heating Compliance Guide
Commercial Heating Compliance Guide
Industrial Heating Compliance Guide
Residential Heating Compliance Guide
What is the main purpose of central heating?
To provide thermal comfort within a property
To reduce electricity bills
To improve air quality
To increase property value
How does central heating differ from an open fire?
Central heating provides heat in every room, while an open fire gives heat in one room
Central heating is more expensive than an open fire
Central heating is less efficient than an open fire
Central heating is only used in commercial buildings
What is thermal comfort?
The balance between the body and surroundings within economic constraints
The highest possible temperature in a room
The lowest possible temperature in a room
The amount of humidity in the air
What is the main difference between full central heating and selective central heating?
Full central heating heats all rooms, while selective central heating heats only selected rooms.
Full central heating is more energy-efficient than selective central heating.
Selective central heating heats all rooms, while full central heating heats only selected rooms.
Full central heating is used only in commercial properties.
At what outside temperature must the comfort temperature be reached for both full central heating and selective central heating?
0°C
-10°C
-5°C
5°C
Who sets the specific temperature for both full central heating and selective central heating?
The property owner
The customer
The heating technician
The manufacturer
What is the main reason for installing background central heating?
To achieve the highest possible room temperature
To reduce installation costs
To use the largest boiler available
To heat the rooms to a higher temperature
What type of boiler or heat emitters are typically used in background central heating?
Larger boilers or heat emitters
Smaller boilers or heat emitters
Medium-sized boilers or heat emitters
No boilers or heat emitters
What is the classification of a heating system that cannot achieve the customer’s desired comfort temperature when the outside temperature is -10°C?
Full heating
Selective heating
Background heating
No heating
Which heating system has replaced the open fire in each room over the past 100 years?
Gravity hot water system
Pumped heating with gravity hot water
Fully pumped system
All of the above
What is now preferred to an open fire for heating the whole property?
Gravity hot water system
Pumped heating with gravity hot water
Fully pumped system
Central heating
What is the first system that replaced the open fire in each room?
Pumped heating with gravity hot water
Fully pumped system
Gravity hot water system
Central heating
What is the final system mentioned that replaced the open fire in each room?
Gravity hot water system
Pumped heating with gravity hot water
Fully pumped system
Central heating
What types of fuel have systems transitioned from and to over the years?
From gas to solid fuel
From oil to electricity
From solid fuel to gas, oil, and electricity
From electricity to gas and oil
What factors will customers be conscious of regarding the costs of the system?
Only the installation costs
Only the running costs
Both installation and running costs
Neither installation nor running costs
Which of the following is NOT listed as a consideration for customers regarding system costs?
Maintenance
Efficiency
Performance
Aesthetics
Modern domestic central heating systems fall into how many categories?
One
Two
Three
Four
What is a characteristic of low pressure, open vented systems?
They are fed directly from the mains cold water.
They incorporate an expansion vessel.
They are fed from a feed and expansion cistern located at high level.
They are always fully pumped systems.
Which type of system incorporates an expansion vessel to take up the expansion of the heated water?
Low pressure, open vented systems
Gravity systems
Sealed, pressurised systems
Fully pumped systems
Which type of system is described as a more modern fully pumped or combination boiler system?
Low pressure, open vented systems
Gravity systems
Sealed, pressurised systems
Feed and expansion cistern systems
Which of the following is a type of wet central heating system?
Open-vented (low pressure) systems
System boiler option
Combination boiler systems
All of the above
What type of system uses two two-port motorised valves?
Semi-gravity systems
Pumped heating only systems
Fully pumped systems
System boiler option
Which system is categorized under sealed (pressurised) systems?
One-pipe systems
Two-pipe systems
System boiler option
Semi-gravity systems
Which of the following is NOT a type of fully pumped system?
System using one three-port mid-position valve
Microbore systems
Two-pipe reversed return system
One-pipe systems
What type of systems use convection currents to circulate water around the pipework?
Modern systems
Gravity or semi gravity systems
Electrical systems
Solar systems
What size of primaries are usually associated with gravity or semi gravity systems?
15mm
22mm
28mm
35mm
Which of the following is NOT a type of gravity or semi gravity system?
One pipe semi gravity
Two pipe semi gravity
C plan semi gravity
Three pipe semi gravity
Gravity or semi gravity systems are typically associated with which type of boilers?
Electric boilers
Gas boilers
Solid fuel boilers
Oil boilers
What type of systems are no longer installed but may be found in older properties?
Full gravity systems
Forced air systems
Radiant heating systems
Geothermal systems
What do full gravity systems use to offer background heating?
Small diameter pipework
Large diameter pipework
Electric heaters
Solar panels
Why does the pipework in full gravity systems need to be laid at the correct fall?
To allow proper convection
To prevent leaks
To reduce installation costs
To increase water pressure
What was a significant drawback of full gravity systems regarding heat-up time?
They had no pump for hot water or heating
They used too much electricity
They were prone to frequent breakdowns
They required constant maintenance
What type of hot water cylinders are still in use in some older houses?
Double feed hot water cylinders
Single feed or primatic hot water cylinders
Electric hot water cylinders
Solar hot water cylinders
How is the primary circuit filled in single feed or primatic hot water cylinders?
Via the hot feed to the cylinder
Via the cold feed to the cylinder
Via an external pump
Via a manual fill valve
Why can't inhibitors be added to single feed or primatic hot water cylinders?
Because they are too expensive
Because they are not effective in this type of system
Because it is a gravity-only system
Because they cause corrosion
What will happen if a single feed or primatic hot water cylinder system is converted to pumped?
The system will become more efficient
The air lock separating the two waters will be lost
The system will overheat
The system will stop working
What is a characteristic of the one pipe gravity system?
It uses multiple pipe circuits.
It relies on gravity to heat radiators.
It has a high installation cost.
It does not return water to the boiler.
What is a drawback of the one pipe gravity system?
It requires multiple boilers.
It has a high installation cost.
Each radiator progressively gets cooler.
It does not use gravity.
Why was the installation cost of the one pipe gravity system cheaper?
It used multiple ring pipes.
It did not require a boiler.
It used only one ring pipe.
It did not require any pipes.
What type of system is depicted in the diagram?
Two pipe gravity system
One pipe gravity system
Three pipe gravity system
Four pipe gravity system
Which component in the diagram is responsible for heating the water?
Feed and expansion cistern
Time clock
Boiler
Central heating circulating pump
What is the diameter of the primary flow pipe in the system?
15mm
22mm
28mm
35mm
Which component ensures the circulation of water in the system?
Feed and expansion cistern
Time clock
Boiler
Central heating circulating pump
What is one advantage of a one pipe gravity system?
High efficiency
Cheap to install
Compliant to Building Regulations part L
Controlled room temperature
Which of the following is a disadvantage of a one pipe gravity system?
High installation cost
Controlled room temperature
Each radiator progressively cools down
Compliant to Building Regulations part L
In a one pipe gravity system, what is pumped?
Each radiator
Only the main ring
The entire system
The boiler
Which of the following is NOT a disadvantage of a one pipe gravity system?
Boiler could cycle
Uncontrolled room temperature
High efficiency
Not compliant to Building Regulations part L
What type of circulation does the two pipe semi gravity system use for the hot water circuit?
Pumped circulation
Gravity circulation
Mixed circulation
No circulation
In a two pipe semi gravity system, what prevents the flow and return waters from mixing?
A single pipe system
A mixing valve
Separate pipes for flow and return
A heat exchanger
What was the purpose of having separate pipes for flow and return in the two pipe semi gravity system?
To reduce water pressure
To allow heat emitters to achieve the same temperature
To increase water flow speed
To mix hot and cold water
How was the heating controlled in the two pipe semi gravity system?
By a thermostat that controlled the pump
By manually adjusting the valves
By a timer switch
By a pressure regulator
What was a common issue with the hot water in the two pipe semi gravity system?
It was often too cold
It had no control and was often very hot
It mixed with the cold water
It was difficult to circulate
What type of system is depicted in the diagram?
One pipe gravity system
Two pipe semi gravity system
Three pipe gravity system
Four pipe semi gravity system
Which component in the diagram is responsible for controlling the pump?
Boiler
Programmer
Room thermostat
Feed and expansion cistern
What is the diameter of the cold feed pipe in the system?
15mm
22mm
28mm
30mm
What is the function of the feed and expansion cistern in the system?
To heat the water
To control the room temperature
To allow for expansion and contraction of water
To pump water through the system
What is one advantage of a two pipe semi gravity system?
Uncontrolled heat
Boiler cycling
All heat emitters reach the same temperature
Not compliant to Building Regulations part L
Which of the following is a disadvantage of a two pipe semi gravity system?
Cheaper to run
Two pipe system is quicker when heating up
All heat emitters reach the same temperature
Boiler cycling
Why is a two pipe semi gravity system considered cheaper to run?
It has uncontrolled heat
It is not compliant to Building Regulations part L
It is quicker when heating up
Boilers connected to these systems are low efficiency
Which of the following is NOT an advantage of a two pipe semi gravity system?
All heat emitters reach the same temperature
Two pipe system is quicker when heating up
Cheaper to run
Boilers connected to these systems are low efficiency
What is included in the C plan two pipe semi gravity system?
A room thermostat and TRVs
A cylinder thermostat and zone control on the hot water
A mechanical thermostat and zone control on the heating
A digital thermostat and TRVs
What additional features does the C plan plus include compared to the C plan?
A digital thermostat and TRVs
A room thermostat, TRVs, and zone control on the heating
A mechanical thermostat and zone control on the hot water
A cylinder thermostat and digital control on the heating
According to the Domestic Heating Compliance Guide, what must the C plan plus system incorporate?
A digital thermostat
A mechanical thermostat
A thermo mechanical thermostat
A programmable thermostat
Which building regulations part does the C plan plus comply with?
Part L1a
Part L1b
Part L2a
Part L2b
