WorksheetsGeneral Shop/Tool Safety
Total questions: 10
Worksheet time: 5mins
It (Is / Is not) important to make sure that all stock is supported and securely clamped down.
Is
Is not
Might be
Should be
Adjust the depth of cut to the thickness of the stock (material) plus (1/4 inch / 1/2 inch / 3/4 inch).
1/4 inch
1/2 inch
3/4 inch
1 inch
The power cord (Should / Should not) be clear of the blade.
Should
Should not
Might be
Can be
Your work area should be (Clean / Dirty) before you start cutting.
Clean
Dirty
Messy
Cluttered
Check the base and angle adjustments to be sure they are (Loose / Tight).
Loose
Tight
Flexible
Adjustable
Always place the base of the saw on the stock you will be cutting. Make sure that the blade (Is / Is not) actually touching the stock before you turn it on!
Is
Is not
Might be
Should be
Advance the saw blade (Slowly / Quickly) through the work.
Slowly
Quickly
Rapidly
Swiftly
Make sure the blade cuts (Angled / Straight) into the work.
Angled
Straight
Curved
Zigzag
You should set the saw down after the blade has come to a (Half / Full) stop!
Half
Full
Partial
Complete
You should (Unplug / Turn On) the machine to change the blades or to make any adjustments.
Unplug
Turn On
Restart
Reset
