An engineer is troubleshooting a Cisco CMX high-availability deployment and notices that the primary and backup Cisco CMX servers are both considered primary. Which command must the engineer run on the backup server?

A controller shows that an AP in your environment is detecting interference, but the AP health score in Cisco DNA Center is unaffected. What are two reasons that
Cisco DNA Center is ignoring the interference? (Choose two.)

The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed.To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied.

What actions should be taken to resolve this issue?

An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window.

Which setting on Cisco CMX allows the engineer to view the tags?

Refer to the exhibit. An administrator notices slower location updates from the controller to Cisco CMX. Which command must be configured to get an update every 5 seconds for rogues?

A customer requires wireless traffic from the branch to be routed through the firewall at corporate headquarters. A RADIUS server is in each branch location.
Which Cisco FlexConnect configuration must be used?

An IT administrator is managing a wireless network in which most devices are Apple iOS. A QoS issue must be addressed on the WLANs. Which configuration must be performed?

A corporation has employees working from their homes. A wireless engineer must connect 1810 OEAP at remote teleworker locations. All configuration has been completed on the controller side, but the network readiness is pending. Which two configurations must be performed on the firewall to allow the AP to join the controller? (Choose two.)

An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration?

Which COS to DSCP map must be modified to ensure that voice traffic is tagged correctly as it traverses the network?

A multitenant building contains known wireless networks in most of the suites. Rogues must be classified in the WLC. How are the competing wireless APs classified?

An engineer needs to configure an autonomous AP for 802.1x authentication. To achieve the highest security an authentication server is used for user authentication. During testing, the AP fails to pass the user authentication request to the authentication server. Which two details need to be configured on the AP to allow communication between the server and the AP? (Choose two.)

After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server. Which action accomplishes this task?

On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?

An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address.

A network administrator managing a Cisco Catalyst 9800-80 WLC must place all iOS connected devices to the guest SSID on VLAN 101. The rest of the clients must connect on VLAN 102 distribute load across subnets. To achieve this configuration, the administrator configures a local policy on the WLC. Which two configurations are required? (Choose two.)

A wireless network engineer must present a list of all rogue APs with a high severity score to senior management. Which report must be created in Cisco Prime Infrastructure to provide this information?

A customer managing a large network has implemented location services. Due to heavy load, it is needed to load balance the data coming throughNMSP from the WLCs. Load must be spread between multiple CMX servers to help optimize the data flow for APs.

After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802.11 interferers. After surveying the area, it has been decided that RRM should not change the channel.

An IT administrator deploys Cisco 2802i APs in all office locations, including main campus and branch offices. The WLC that manages the APs is located at the data center on the main campus. The APs on the main campus are configured to use Local mode and the APs in the branches use FlexConnect mode. Which configuration must be applied to the APs for corporate devices on the main campus to be mapped to the local LAN switch on different VLANs according to the
VLAN tag ID and WLAN?

An engineer set up identity-based networking with ISE and configured AAA override on the WLAN. Which two attributes must be used to change the client behavior from the default settings? (Choose two.)

An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server.

Which protocol must be used between the controller and CA server to request and install certificates?

After receiving an alert regarding a rogue AP, a network engineer logs into Cisco Prime and looks at the floor map where the AP that detected the rogue is located.
The map is synchronized with a mobility services engine that determines the rogue device is actually inside the campus. The engineer determines the rogue to be a security threat and decides to stop it from broadcasting inside the enterprise wireless network. What is the fastest way to disable the rogue?

Refer to the exhibit. An engineer must provide a position of rogue APs on a floor map using Cisco PI 3.0, but no rogue AP options are showing on the left-hand navigation menu under Maps. What is the reason for this omission?

Refer to the exhibit. An engineer is troubleshooting a client connectivity issue. The client is in the RUN state, and no traffic is passed after authenticating by using Cisco ISE. Which action resolves the problem?

Refer to the exhibit. An engineer has deployed the Cisco CMX solution to track and detect the number of users who visit the office each day. The CMX dashboard is not showing any data. Which action resolves this issue?

Company XYZ recently migrated from AireOS to IOS XE 9800 WLCs. The Internet bandwidth must be limited to 5 Mbps for each guest client as per the global standard. In which configuration on the Cisco Catalyst 9800 WLC must the QoS requirement be added?

A wireless administrator receives this information to complete a CMX deployment in high availability by using version 10.6 to gather analytics.

• IP address of the primary server
• IP address of the secondary server
• failover mode to be configured as automatic
• root password of the secondary server
• email ID for NOC notifications

Enabling high availability fails when these parameters are used. Which action resolves the issue?

An engineer is in the process of implementing Fastlane on a wireless network with a Mobility Express AP installed. The network must support voice and video applications for Apple devices. Due to a security concern, all iPhones are updated to version 14.5.432302546. Which QoS profile must the engineer configure on the user WLAN?

A wireless engineer deployed all remote sites as FlexConnect. The client VLAN assignment on these sites is configured manually mapped by WLAN and using local switching. Dynamic VLAN assignment is provided by the newly deployed Cisco ISE. Which IETF attribute must be configured on the AAA server to send that VLAN ID?

AN ENGINEER MUST PRESERVE A QOS MARKING SENT BY THE CISCO JABBER SOFWARE RUNNING ON PC1, WHICH MARKING VALUE MUST BE TRUSTED ON PORT FA0/6?

An engineer manages a wireless network for an enterprise. The offices of the enterprise are in a multistory building with other companies. To avoid service loss of the wireless network, jamming devices must be monitored and an alert must be raised when one enters the airspace. Which two parameters must be configured for this alarm to happen? (Choose two.)

More people are working from home, so an engineer must configure OEAPs to support the users. The security team already configured NAT with a public IP address that points to the internal WLC IP address. The APs also have been configured with the public WLC IP address, but APs cannot join the controller yet. Which action resolves this issue?

An engineer is configuring the maps on the Cisco Prime Infrastructure, but clients fail to show up on the maps. Which two actions are needed to complete this configuration? (Choose two.)

Which role does an engineer configure for administrative access to the wireless infrastructure, using Cisco ISE, to allow configuration of the WLC syslog configuration?

An administrator is querying the Cisco CMX server through REST API for active client data to build an application. Cisco CMX supports the use of version 3 of REST API to query for active clients in the network. While testing to retrieve information using the API, no results are received. Which configuration is required for authentication against the API?

An IT administrator deploys Cisco 2802i APs in all office locations, including main campus and branch offices. The WLC that manages the APs is located at the data center on the main campus. The APs on the main campus are configured to use Local mode and the APs in the branches use FlexConnect mode. Which configuration must be applied to the APs for corporate devices on the main campus to be mapped to the local LAN switch on different VLANs according to the
VLAN tag ID and WLAN?

A network engineer must configure APs on a controller for 802.1x access to a wired infrastructure as quickly as possible. The same credentials are used for all APs. Where are the credentials entered?

As part of a PCI audit, an engineer is gathering information on a Cisco Unified Wireless Network environment. The report must include any security weaknesses in the system. Where does the engineer find the related information?

An engineer must implement a wireless network to support location services. The network will include an MSE and Cisco WLC. After the deployment, the IT team must be able to locate and track clients. What is the minimum number of APs that a client must hear to accomplish this configuration so that the engineer can position them accordingly?

A network engineer is configuring a Cisco FlexConnect AP to allow Cisco ISE to dynamically assign the subnet of a user based on their credentials. Which controller mapping must be modified for this feature?

An engineer manages the wireless network for a government agency. The wireless network is used for access to the corporate network. The wireless network must include the latest wIPS/wIDS detection definitions. Which action does the engineer take to ensure that this requirement is met?

A NETWORK ENGINEER PERFORMED A NEW DEPLOYMENT OF CISCO DNA CENTER, THE ENGINEER DISCOVERED AND PROVISIONED ALL APs and converted then to fabric, the ssid were created nd the aps were allocated to the respective floors, but the SSIDs are not being seen on the floor. what must be configured to stablish this connectivity?

An engineer deploys APs to a branch office. All AP control and management-related traffic must be tunneled to a centralized WLC via CAPWAP. All user traffic must utilize the local Internet line. What should be configured?

A network engineer is configuring a Cisco AireOS 8.2 WLC, Cisco MSE, and Cisco PI with Cisco 3700 Series APs and Cisco Hyperlocation modules. The engineer configures and enables a WLAN with Hyperlocation. During testing, the engineer notices that the hyperlocation module cannot be seen in the WLC . Which action resolves the issue?

A municipality customer uses a Cisco 5520 Series Wireless Controller for the wireless network. The customer intends to move the depot of its stores from using legacy bespoke voice-over-Wi-Fi handsets to a VoIP software package running on 5 GHz-capable laptops, tablets, and smartphones. Bluetooth headsets will be used for any voice communication on any data device. Assuming that a suitable RF site survey for 5 GHz has already been carried out, which two configuration settings ensure the best possible voice experience? (Choose two.)

What is an indication of having multiple wireless controllers within the same CAPWAP multicast group?

An engineer must enable AVC on a Cisco Catalyst 9800 WLC and send the NetFlow data to a NetFlow collector. What must be configured on the controller with the IP address and port number of the NetFlow collector?

A network engineer is implementing BYOD on a wireless network. Based on the customer requirements, a dual SSID approach must be taken. Which two advanced WLAN configurations must be performed? (Choose two.)