NEW
Font size
WorksheetsCM103 Q-1 of Tool Identification Quiz
Total questions: 25
Worksheet time: 13mins
Which type of saw is best suited for cutting finish lumber and miter joints?
Hacksaw
Backsaw
Coping saw
Crosscut saw
Which tool is best for clearing tree roots?
Spade
Pick
Mattock
Shovel
What is the primary use of a level ?
Measuring angles
Checking for horizontal and vertical alignment
Cutting straight lines
Tightening bolts
A plumb bob is used to check for horizontal alignment.
True
False
The width of a cut taken by a saw blade, equal to that of the blade teeth, is known as ________.
Kerf
Bevel
Gullet
Rake
________ is a tool used to tighten or loosen nuts and bolts by applying torque.
Wrench
Hammer
Screwdriver
Pliers
________ paper is an abrasive material used for smoothing surfaces.
Sand
Wax
Tissue
Parchment
When would you use a "spirit" level instead of a laser level?
When working in a well-lit area.
When working in a small, confined space.
When working on a large construction site.
When working with metal surfaces.
How do you maintain and care for a wood chisel after use?
Store it in a damp place.
Sharpen it regularly and store it in a dry place.
Clean it with water and store it in a plastic bag.
Use it only on softwood.
Why is it important to match the saw blade type with the material being cut?
To ensure a clean and efficient cut.
To reduce the noise level.
To increase the speed of cutting.
To make the saw last longer.
What is a plumb bob used for?
Checking for vertical alignment
Removing large amounts of wood quickly
Checking for horizontal and vertical alignment
Cutting wood along the grain
Which tool is used for cutting metal?
Backsaw
Coping saw
Hacksaw
Claw hammer
True or False: A higher grit number indicates finer sandpaper.
True
False
How should you carry a handsaw to ensure safety?
With the blade pointed up
With the blade pointed down and away from your body
With the blade pointed towards your body
With the blade covered in cloth
What does proper cleaning and storage of tools prevent?
Rust
Dulling
Other damage
All of the above
Which among the image is the Axe
Saw blades are categorized by the amount of teeth there are per inch of blade, which is called TPI. TPI stands for _____ ____ ____.
teeth pond increments
tons per inch
teeth per increment
teeth per inch
Which among the image is the crosscut saw?
Which among the tools is the Nail?
Which among the tools is the tape measure?
Which among the tools are the Mallets?
Which among the tools is the Keyhole saw?
Which tool listed is a brand name?
Locking pliers
Monkey wrench
Side cutters
Vise Grips
Which among the tools is the tape measure?
What tool is used to hold boards together while gluing parts together until the glue dries?
hammers
rulers
clamps
screw drivers
