WorksheetsSRWE - Module 3 - VLANs
Total questions: 14
Worksheet time: 7mins
Name
Class
Date
1.
What happens to a port that is associated with VLAN 10 when the administrator deletes VLAN 10 from the switch?
a)
The port becomes inactive
b)
The port automatically associates itself with the native VLAN
c)
The port goes back to the default VALN
d)
The port creates the VLAN again
e)
It is deleted from the vlan.dat file
2.
In which memory location are the VLAN configurations of normal range VLANs stored on a Catalyst switch?
a)
Startup Config
b)
NVRAM
c)
Flash
d)
RAM
e)
ROM
3.
What is the purpose of setting the native VLAN separate from data VLANs?
a)
So the native taffic takes up less VLANs
b)
The native VLAN is for routers and switches to exchange their management information, so it should be different from data VLANs
c)
The securty of management frame that are carried in the native VLAN can be enhanced
d)
A seperate VLAN should be used to carry uncommon untagged frames to avoid bandwidth contention on data VLANs
e)
The native VLAN is for carrying VLAN management traffic only
4.
Which VLAN is used for secure and or encrpted traffic?
a)
Native
b)
Management
c)
Data
d)
Default
e)
Voice
5.
How many usable VLANs are there on a Cisco 2690 switch?
a)
4090
b)
4094
c)
4096
d)
4000
e)
4098
6.
What VTP role allows the device to create, modify and delete VLANs? (Choose two)
a)
VTP Transparent
b)
VTP Manager
c)
VTP Server
d)
VTP Client
e)
VTP Host
7.
An Engineer wants to use DTP so he sets the configuration at both ends to dynamic auto. Will a trunk link form? True or False
a)
False
b)
True
8.
A Cisco switch currently allows traffic tagged with VLANs 30 and 40 across trunk port Fa0/24. What is the effect of issuing a switchport trunk allowed vlan 60 command on Fa0/24?
a)
It allows VLANs 60 and above on Fa0/24
b)
It allows VLANs 1 to 60 on Fa0/24
c)
It allows 30,40 and 60 on Fa0/24
d)
It allows a native VLAN of 30 to be implemented on Fa0/24
e)
It allows only VLAN 60 on Fa0/24
9.
For what reason would a network administrator use the show interfaces trunk command on a switch?
a)
To verify port assiciation with a particular VLAN
b)
To display an IP address for any existing VLAN
c)
To examine DTP negotiation as it occurs
d)
To veiw the native VLAN
e)
To view the configiuration and how the trunk was formed; i.e dynamic auto or dynamic desirable
10.
Which type of VLAN is assigned to 802.1Q trunk ports to carry untagged traffic?
a)
Management
b)
Native
c)
Default
d)
Data
e)
Voice
11.
Refer to the exhibit. PC-A and PC-B are both in VLAN 50. PC-A is unable to communicate with PC-B. What is the problem?
a)
The VLAN that is used by PC-A is not in the list of allowed VLANs on the trunk
b)
The native VLAN should be VLAN 50
c)
The trunk has not been configured
d)
Th native VLAN is being pruned from the link
e)
Fa0/1 should be a trunk link
12.
On a switch that is configured with multiple VLANs, which command will remove only VLAN 20 from the switch?
a)
switch(config-if)# no vlan 20
b)
switch# no vlan 20
c)
switch(config)# no vlan 20
d)
switch# delete flash:vlan.dat
e)
switch(config-if) no switchport trunk allowed vlan 20
13.
A network contains multiple VLANs spanning multiple switches. What happens when a device in VLAN 100 sends a broadcast Ethernet frame?
a)
Only devices in VLAN 100 see the frame
b)
All devices in all VLANs see the frame
c)
Devices in VLAN 100 and the management VLAN see the frame
d)
Only devices that are connected to the local switch see the frame
e)
The frame is dropped
14.
Port Fa0/11 on a switch is assigned to VLAN 30. If the command no switchport access vlan 30 is entered on the Fa0/11 interface, what will happen?
a)
VLAN 30 will be in error dis-abled state
b)
VLAN 30 will be deleted
c)
An error message would be displayed
d)
Port Fa0/11 will be shutdown
e)
Port Fa0/11 will be returned to VLAN 1
100 %
