NEW
Font size
WorksheetsProcedure Text Quiz
Total questions: 18
Worksheet time: 14mins
What is the purpose of a procedure text?
To tell a story.
To explain how something works or how to use something.
To entertain the reader.
To describe a person, place, or thing.
To persuade someone to do something.
Which of the following is an example of a procedure text?
A story about a trip to the beach.
An advertisement for a new product.
A recipe for making pancakes.
A description of a famous landmark.
A biography of a famous person.
What is the correct sequence of steps in a procedure text?
Materials - Goal - Steps.
Goal - Materials - Steps.
Steps - Materials - Goal.
Goal - Steps - Materials.
Materials - Steps - Goal.
What language features are commonly used in a procedure text?
Past tense and adverbs of frequency.
Simple present tense and imperative sentences.
Present continuous tense and passive voice.
Future tense and conditional sentences.
Reported speech and past continuous tense.
"First, heat the pan over medium heat. Then, add oil and wait until it's hot." Which part of the procedure text is this?
Goal.
Materials.
Steps.
Result.
Explanation.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
What should you do first when installing a light bulb?
Test the light by flipping the switch.
Turn off the power from the main electrical panel.
Use a screwdriver to unscrew the bulb socket.
Install the new light bulb.
Turn the power back on from the electrical panel.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
Which tool might be necessary to replace a light bulb in the procedure above?
Hammer.
Pliers.
Screwdriver.
Wrench.
Multimeter.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
Why is it important to turn off the power before replacing the light bulb?
To avoid damaging the new bulb.
To save electricity.
To prevent electric shock.
To improve the brightness of the light.
To ensure the light bulb works properly.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
After installing the new bulb, how do you check if it works?
Turn off the power from the main panel.
Screw the bulb tightly.
Flip the switch to test the light.
Use a multimeter to measure the voltage.
Replace the fuse in the panel.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
In which step do you fasten the new light bulb?
Step 1.
Step 2.
Step 3.
Step 5.
Step 6.
"How to Measure Voltage with a Multimeter"
The first,Turn the multimeter dial to the voltage (V) setting. Next, Connect the black probe to te COM terminal and the red probe to the VΩ terminal on the multimeter. After that place the black probe on the negative terminal of the circuit and the red probe on the positive terminal and then read the voltage displayed on the screen.
Once the measurement is complete, remove the probes from the circuit and turn off the multimeter.
What is the first step when measuring voltage using a multimeter?
Place the red probe on the positive terminal.
Connect the black probe to the COM terminal.
Turn the multimeter dial to the voltage setting.
Read the voltage displayed on the screen.
Remove the probes from the circuit.
"How to Measure Voltage with a Multimeter"
The first,Turn the multimeter dial to the voltage (V) setting. Next, Connect the black probe to te COM terminal and the red probe to the VΩ terminal on the multimeter. After that place the black probe on the negative terminal of the circuit and the red probe on the positive terminal and then read the voltage displayed on the screen.
Once the measurement is complete, remove the probes from the circuit and turn off the multimeter.
Which terminal should the black probe be connected to on the multimeter?
VΩ terminal.
mA terminal.
COM terminal.
A terminal.
DC terminal.
"How to Measure Voltage with a Multimeter"
The first,Turn the multimeter dial to the voltage (V) setting. Next, Connect the black probe to te COM terminal and the red probe to the VΩ terminal on the multimeter. After that place the black probe on the negative terminal of the circuit and the red probe on the positive terminal and then read the voltage displayed on the screen.
Once the measurement is complete, remove the probes from the circuit and turn off the multimeter.
What is the purpose of placing the black and red probes on different terminals of the circuit?
To complete the circuit for continuity testing.
To measure the resistance of the circuit.
To ensure the correct polarity for voltage measurement.
To check if the circuit is open or closed.
To measure the current flowing through the circuit.
"How to Measure Voltage with a Multimeter"
The first,Turn the multimeter dial to the voltage (V) setting. Next, Connect the black probe to te COM terminal and the red probe to the VΩ terminal on the multimeter. After that place the black probe on the negative terminal of the circuit and the red probe on the positive terminal and then read the voltage displayed on the screen.
Once the measurement is complete, remove the probes from the circuit and turn off the multimeter.
When should you remove the probes from the circuit?
Before turning on the multimeter.
After taking the voltage measurement.
Before reading the voltage on the screen.
When the multimeter shows zero voltage.
After connecting the probes.
"How to Measure Voltage with a Multimeter"
The first,Turn the multimeter dial to the voltage (V) setting. Next, Connect the black probe to te COM terminal and the red probe to the VΩ terminal on the multimeter. After that place the black probe on the negative terminal of the circuit and the red probe on the positive terminal and then read the voltage displayed on the screen.
Once the measurement is complete, remove the probes from the circuit and turn off the multimeter.
Why is it important to turn off the multimeter after use?
To save battery life.
To reset the measurement settings.
To ensure safety during the next use.
To avoid electric shock.
To recalibrate the multimeter for future measurements.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
What is the last step in the procedure for installing a light bulb?
Turn off the power from the main electrical panel.
Ensure the bulb is securely fastened.
Test the light by flipping the switch.
Install the new light bulb into the socket.
Use a screwdriver to unscrew the old bulb socket.
"How to Install a Light Bulb"
1. Turn off the power from the main electrical panel.
2. Use a screwdriver to unscrew the old bulb socket if necessary.
3. Install the new light bulb into the socket by turning it clockwise.
4. Ensure the bulb is securely fastened.
5. Turn the power back on from the electrical panel.
6. Test the light by flipping the switch.
What should you do if the light bulb does not work after installation?
Check if the bulb is properly installed.
Replace the bulb with a new one immediately.
Turn off the power and remove the bulb.
Call an electrician for assistance.
Leave it and try again later.
"How to Measure Voltage with a Multimeter"
The first,Turn the multimeter dial to the voltage (V) setting. Next, Connect the black probe to te COM terminal and the red probe to the VΩ terminal on the multimeter. After that place the black probe on the negative terminal of the circuit and the red probe on the positive terminal and then read the voltage displayed on the screen.
Once the measurement is complete, remove the probes from the circuit and turn off the multimeter.
What is the purpose of using a multimeter in electrical work?
To measure the temperature of electrical components.
To test the continuity of circuits.
To check the color coding of wires.
To calculate the power consumption of devices.
To determine the age of electrical equipment.
