WorksheetsTransceiver Quiz
Total questions: 37
Worksheet time: 19mins
What do transceivers do?
Transmit and Receive
Only Transmit
Only Receive
Amplify Signals
What are the modes of operation for a transceiver?
AM, FM, FSK, and PSK
AM, FM, USB, and LSB
FM, PM, ASK, and QAM
AM, PM, FSK, and QAM
What does the Comm Mode Switch on the Victor 7 do?
Selects between LOS and SATCOM
Selects between AM and FM
Selects between USB and LSB
Selects between VHF and UHF
What does the Control Switch do?
Local and Remote
On and Off
High and Low
Fast and Slow
How many preset channels are available on the Victor 7?
20
10
15
25
What is the most common fault?
Us
Them
It
You
What are the ARC-210 modes?
LOS, Frequency Hopping, and Single Channel
LOS, Dual Channel, and Frequency Hopping
Single Channel, Dual Channel, and Frequency Hopping
LOS, Dual Channel, and Single Channel
SATCOM circuits on an ARC-210?
Yes as it is capable of SINCGARS operations
No, it is not capable of SINCGARS operations
Only for short-range communication
Only for GPS operations
What resources do we use to set up pieces of gear?
SOP, COMMPLAN, COM Status Board, Tech Manual
User Manual, Internet, Phone, Email
Blueprints, Maps, GPS, Compass
Software, Hardware, Network, Database
What connects Krypto to my Red Phone?
Red SAS
Blue SAS
Green SAS
Yellow SAS
What are my different modes for receiving TOD?
GPS, Manual, Over the Air. Auto, Emergency Time Start
Manual, Digital, Analog, Satellite
Online, Offline, Manual, Automatic
Direct, Indirect, Satellite, Cable
On my WSC-3v11 malfunction indicator?
Frequency below 225 MHz
Frequency above 225 MHz
Frequency at 225 MHz
Frequency at 200 MHz
What piece of equipment has a jack, line jack and a monitor jack?
Patch Panel
Switchboard
Router
Modem
Bravo circuit?
Simplex receive or transmit, LOS, Short Range
Duplex receive or transmit, LOS, Long Range
Simplex receive only, LOS, Medium Range
Duplex transmit only, LOS, Short Range
What type of circuit is a Charlie Circuit?
Half or Full Duplex, LOS
Simplex, LOS
Full Duplex, NLOS
Half Duplex, NLOS
What does the CV-3510 do?
Converts AF to DC for Receiving and reverse for Transmitting
Converts DC to AF for Receiving and reverse for Transmitting
Converts AF to AC for Receiving and reverse for Transmitting
Converts AC to DC for Receiving and reverse for Transmitting
Which mode will automatically switch between transmit or receive?
Auto
Manual
Semi-Auto
Fixed
What are the two types of keys for KG-84A?
TEK and KEK
TEK and LEK
KEK and LEK
KEK and MEK
What resource provides ship-specific info for setting up a circuit?
SOP
SOPA
SOPB
SOPC
How do you switch between ports on a NOW?
Function Keys
Toggle Switch
Dial
Button
If setting up a WSC-3v7 for a specific circuit, which switch is needed for data setup?
Data Switch
Circuit Switch
Setup Switch
Function Switch
What does the Frequency Select Switch on the WSC-3 allow you to do?
Adjust volume levels
Switch between Presets or Manual
Change the power source
Connect to the internet
What resources are available for troubleshooting the WSC-3?
User Guide and FAQ
Tech Manual and the B.I.T.
Online Forums and Blogs
Customer Support and Live Chat
What does "Carrier Online" indicate?
The device is turned off
The signal is being actively monitored or transmitted
The battery is low
The system is in standby mode
Which resources are used to set up gear?
User Manual and Quick Start Guide
SOP, COMMPLAN, COMM Status Board, Tech Manual
Online Tutorials and Videos
Customer Service and Support
What converts RF to AF?
Amplifier
Transceiver
Modulator
Antenna
Which transceiver is used for LOS?
WSC-3v7
WSC-2v5
WSC-4v9
WSC-1v3
What is the transceiver for SATCOM?
WSC-3v 15, 17, 19
CV-3510
KG-84
SB-4124
What is unique to the Charlie Circuit?
CV-3510, Red and Black SB-4124, KG-84, NOW
WSC-3v 15, 17, 19
LED light
The NOW Terminal
What is Charlie for?
Secure Comms
LED light
The NOW Terminal
Start Zeroizing our Gear
What is a common problem for the CV-3510?
LED light
WSC-3v 15, 17, 19
Secure Comms
Start Destroying our Gear
What is your I/O Device on a data circuit?
The NOW Terminal
CV-3510
WSC-3v 15, 17, 19
KG-84
What is the Emergency Action Plan?
Start Zeroizing our Gear
Start Destroying our Gear
Secure Comms
LED light
What is the Emergency Destruction Plan?
Start Destroying our Gear
Start Zeroizing our Gear
The NOW Terminal
CV-3510
What are some reasons for zeroizing equipment?
Equipment turned off for a long period of time, Before Reloading Crypto
Equipment malfunction, After a software update
Power surge, During routine maintenance
User error, After a network failure
What method is used to select a port from the main menu of the NOW terminal?
Press the appropriate Function Key
Use the mouse to click on the port
Enter the port number manually
Use voice command
How do you perform a Comms Test over a data circuit?
Fox Test
Ping Test
Loopback Test
Signal Test
