WorksheetsLV12 - Clutches
Total questions: 15
Worksheet time: 15mins
Name
Class
Date
1.
What is the component being shown?
a)
Torsion Plate
b)
Friction Plate
c)
Pressure Plate
d)
Input Plate
2.
What symptom would an oil contaminated friction plate cause?
a)
Clutch Drag
b)
Clutch Slip
c)
Clutch Judder
d)
Clutch Lag
3.
What is the component shown here?
a)
Pressure Plate
b)
Multi-plate
c)
Input Disc
d)
Drive Plate
4.
Name the type of clutch pressure plate?
a)
Coil Spring
b)
Diaphragm Spring
c)
Lever Spring
d)
Push Spring
5.
Name the type of clutch pressure plate?
a)
Coil Spring
b)
Diaphragm Spring
c)
Lever Spring
d)
Push Spring
6.
What is the meaning of D.M.F?
a)
Double Mass Flywheel
b)
Duel Motion Flywheel
c)
Double Mass Friction-plate
d)
Duel Mass Flywheel
7.
Which component drives the input shaft?
a)
Flywheel
b)
Pressure Plate
c)
Friction Plate
d)
Spigot Bearing
8.
What is the purpose of the clutch release bearing?
a)
To release the clutch pedal
b)
To transmit force on to the friction plate
c)
To transmit force on to the clutch cover diaphragm springs
d)
To release the pressure from the clutch master cylinder
9.
Which of the following is the flow of drive through to the transmission?
a)
Flywheel, Friction plate, Pressure Plate, Cover, Input Shaft
b)
Input Shaft, Flywheel, Cover, Pressure Plate, Friction plate
c)
Flywheel, Cover, Pressure Plate, Friction plate, Input Shaft
d)
Flywheel, Input Shaft, Friction plate, Pressure Plate, Cover
10.
What is being checked here?
a)
Flywheel diameter
b)
Flywheel Runout
c)
Ring Gear Wear
d)
Flexplate Wear
11.
What is the component being shown?
a)
Tandem Master Cylinder
b)
Clutch Slave Cylinder
c)
Clutch Master Cylinder
d)
Clutch Servo
12.
Which component would be at fault if a rumbling noise was heard when pressing the clutch pedal?
a)
Friction Disc
b)
Flywheel
c)
Release Bearing
d)
Pressure Plate
13.
What are the two ways of operating a clutch?
a)
Magnetic and Induction
b)
Hydraulic and Pneumatic
c)
Cable and Pneumatic
d)
Cable and Hydraulic
14.
Is Clutch Fluid Hygroscopic?
a)
No
b)
Yes
15.
What is the purpose of the torsional springs in the friction plate?
a)
Absorbs shock on clutch take up
b)
Increases the coefficient of friction of the friction plate
c)
Absorbs shock on acceleration
d)
Allows the clutch to self adjust as it wears
100 %
