WorksheetsWood Shop Safety Pretest
Total questions: 30
Worksheet time: 20mins
Eye protection must be worn:
Only when working at a machine.
At all times when working in the woodshop.
When teacher reminds me.
Proper footwear for the woodshop is:
Work boots
Any type of shoe
Shoes must cover the toes, heel, and top of the foot
Those students allowed to work in the shop are:
Anyone with previous experience
Only individuals that have completed their safety and training tests
Anyone that thinks they know how
Equipment and tools available for you to use are:
Only tools and machines that I have been instructed in how to use.
Any tool in the shop
Any tool or machine that I can figure out how to use.
I understand that if I do not follow the safety rules and procedures I will:
Greatly increase the possibility of injury.
Lose my privilege to work on machines.
All of the above.
Choose the proper clothing for woodshop.
School lanyards
Open-toed shoes
Dangly jewelry
Rolled up sleeves and tucked in clothing
Choose ALL things that would be appropriate when asked to clean up.
Start cleaning immediately
Sweep up the floors
Put one last nail into my project
Help a classmate clean up their project
Hang tools back in proper area
Check EVERYTHING below that you should ALWAYS let the teacher know about.
You need help with your project.
You have all of your tools.
Your ruler is broken.
You accidentally cut your finger on the saw but it's not bleeding.
You've come up with a project you would like to do.
Googles are worn in the workshop.Why ?
A. To see more clearly what you are doing.
B. To stop someone poking their finger in your eye.
C. To look cool.
D. You could get dust or metal particles (swarf) in your eyes when using equipment.
(Shop Safety) What should you wear in the shop? (Select all that apply)
Safety glasses
Open toed shoes
Ear protection when using loud tools
Loose hanging sleeves
Work clothing that may get dust or paint on them
(Shop Safety) What are the possible causes of an eyeball injury or loss of sight in a woodshop? (Select all that apply)
A drill bit or piece of wood can explode at the drill press sending shards into your eye
A knot can shoot out of a table saw or miter saw blade and lodge in someone's eye
A piece of wood can explode or large chip can shoot off the lathe
Using a chisel can cause wood to shatter sending shards into your eye
Find dust, especially from oily rainforest wood can be a serious eye irritant
How high should the blade be above the board when making a cut on the table saw?
1 inch
1/8 inch
1/4 inch
1/2 inch
How high should the guide be above the board when making a cut on the band saw?
1 inch
1/8 inch
1/4 inch
1/2 inch
Where do you stand when you use the table saw?
to the right
to the left
right when crosscutting, left when ripping
right when ripping, left when crosscutting
If you need to make sharp curves on the band saw, what type of cuts do you make first?
angle cuts
curve cuts
relief cuts
ray cuts
When drilling a large hole in a piece of wood with the drill press, what should you do to the board you are drilling in?
clamp it down
hold it tightly
use a backer board
unplug the machine
Before changing the bit on the router or adjusting the height of the bit, what should you do?
make sure the machine is off
make sure the machine is unplugged
make sure the shaft is locked
make sure your board is clamped down
Any blade adjustments on the table saw can be made with the power off, but still plugged in.
True
False
Students may only work in the woodshop if they have first done these two things...
Passed with a 100% on ALL of the safety tests
Received instructor permission and have supervision.
Used the table saw before at home
Put their safety glasses on today
This is the tool that surprisingly causes the most injury in woodshops...
Miter Saw
Power drill
Table Saw
Screwdriver
The Drill needs to be held _____________________ so that the drill bit does not break.
At a 45 degree angle
Perpendicular to the project
At a 90 degree angle
None of the above
You should always place an ________________ underneath your project when using the drill press to ensure a clean drilled hole on the bottom side of the project.
Metal Plate
Acrylic Slab
Extra Board
None of the above
When sanding on the belt disk sander, the material needs to be …
held in one place
moved in a downward motion against the rotation across the abrasive material
moved in an upward motion going with the rotation across the abrasive material
none of the above
What is this person doing that is unsafe?
She's cutting wood against the grain
She's not wearing eye protection
Her hands are too far apart
Why is it everyone's job to clean up the woodshop?
Saw dust and wood scrap create slipping hazards
To leave the shop clean for the next class
To help classmates move to the next step of the project
Name that tool
(a)
Name that tool
(a)
Name that tool
(a)
Name that tool
(a)
Name that tool
(a)
