WorksheetsUsing a Singer Heavy Duty Sewing Machine
Total questions: 15
Worksheet time: 8mins
What should you do after placing the spool of thread on the spool pin?
Raise the presser foot
Follow the threading path
Load the bobbin
Turn on the machine
The needle should be threaded from ______.
Back to front
Front to back
Left to right
Right to left
What should be done before turning on the machine?
Check thread and bobbin
Select your accessories
Set up the machine
Load the bobbin
What is the purpose of the bobbin winder?
To thread the needle
To wind the bobbin
To raise the presser foot
To select the presser foot
What should you hold with your left hand while drawing up the bobbin thread?
Bobbin
Top thread
Needle
Presser foot
The thread should pass through a ______ disc during top threading.
Tension
Bobbin
Needle
Presser
What should you use to choose your desired stitch type?
Stitch selector dial
Presser foot lever
Thread cutter
Reverse stitch lever
Adjust stitch length and width according to the ______.
Fabric
Project
Machine
Thread
Where should you place the fabric before starting to sew?
Under the presser foot
On the stitch selector dial
In the bobbin area
On the thread cutter.
What should you use to guide the fabric while sewing?
Hands
Feet
Elbows
Knees
What is used to backstitch at the start and end of your sewing line?
Reverse stitch lever
Stitch selector dial
Thread cutter
Presser foot lever
Lift the presser foot and pull the fabric away to ______.
Start sewing
Cut the threads
Secure the stitches
Adjust stitch length
What should be used to cut the threads after sewing?
Thread cutter or scissors
Stitch selector dial
Presser foot lever
Reverse stitch lever
What should be replaced frequently, especially after sewing heavy materials?
Needles
Bobbins
Threads
Stitch selector dials.
What should you avoid doing when guiding the fabric?
Forcing or pulling
Holding taut
Pressing gently
Backstitching
