NEW
Font size
WorksheetsFUN 101 Final
Total questions: 50
Worksheet time: 25mins
Occupational safety and health is ______________ responsibility.
a corporation's
everyone's
What is PPE?
Personal Protective Equipment
Professional Project Experience
Public Policy Engagement
Personal Performance Evaluation
Is there is the possibility of an accident occurring whenever work is undertaken.
Nah! there is no possibility of an accident occurring whenever work is undertaken.
People need to follow policies and develop a “_________” attitude to prevent accidents.
safety first
What does OSHA stand for?
Occupational Safety and Health Administration
Occupational Safety and Health Association
Office of Safety and Health Administration
Occupational Health and Safety Agency
EPA is the abbreviation for which of the following federal organizations responsible for protecting human health and the environment?
Energy Protection Agency
Environmental Policy Agency
Environmental Protection Association
Environmental Protection Agency
If i am viewing a Policy, I see:
A deliberate system of principles guiding decisions.
A collection of unrelated facts and figures.
A spontaneous reaction to a situation.
A set of random choices made by individuals.
The purpose for a procedure is:
a set of established or official steps to accomplish a task.
a random collection of tasks.
a type of software application.
Define a hazard.
A hazard is a potential source of harm.
A hazard is a type of protective equipment.
A hazard is a guaranteed source of safety.
A hazard is an unavoidable event.
What needs to be worn at all times in the shop
open toed shoes
a heavy coat
safety glasses
respirator
To improve safety at work
do not keep emergency numbers posted by your telephone
know which employees have completed first aid training and are qualified to help in an emergency
do not waste time learning fire exits routes as someone will escort you in case of a fire
both B and C
Law of Conservation of Energy Vehicle: Energy Cannot be created or:
Safe or Unsafe to try to stop a piece of work caught and is spinning on a drill bit.
Unsafe
Safe
You find someone who is not breathing on their own. You ask if they are ok and get no response. What is the 1st thing you should do next?
place the patient in recovery position
begin chest compressions
call 911
begin assisted breathing
If you hear a smoke detector you should
have a party
get out and call 911
have a nap
ignore it and watch a movie
You can determine _____ by measuring the probability of exposure to a hazard and a resulting accident.
What is the purpose of a safety sign in the workplace?
To decorate the workplace
To provide information and warnings about hazards
To entertain employees
To increase the value of the property
The acronym PASS stands for:
On __________ Industrial Truck Association (ITA) petitioned OSHA for specific training requirements
OSHA published the final rule for Powered Industrial Truck Operator Training on December 1, 1998. The effective date is:
December 15, 1999
February 1, 2001
March 1, 1999
March 3, 1998
Refresher training is required when: (Mark all that apply)
An evaluation of each powered industrial truck operator’s performance MUST be conducted:
Once a year
Only during training
Every 3 years
After every shift
What is "VCOG"?
Virtual Control Oragami Group
Virtual Center of Online Games
Vehicle Center of Gravity
Virtual Coordination of Operations Group
The MIL is turned off under any of the following conditions, EXCEPT _______.
Vehicle is driven on 3 consecutive trips with a warm-up cycle, without detecting a fault
PCM diagnostic link is grounded
Power to the PCM is disconnected
Codes are cleared with a scan tool
To turn off a permanent DTC the confirmed fault free monitoring cycles must be?
Two Consecutive fault-free monitoring cycles
How many pins does an OBD 2 DLC connector have?
14
16
15
12
What is the main advantage of using an Engine Control Unit (ECU) in modern vehicles?
It allows for manual control of the engine's functions
It increases the vehicle's top speed
It optimizes engine performance and fuel efficiency
It reduces the need for regular maintenance
Which component of the engine management system is primarily responsible for controlling fuel injection timing and quantity?
Oxygen sensor
Engine Control Unit (ECU)
Throttle body
Fuel pump
How can Diagnostic Trouble Codes (DTCs) be accessed in most modern vehicles?
By using a specialized diagnostic tool or scanner connected to the vehicle's OBD port
How do modern vehicles typically indicate the presence of a Diagnostic Trouble Code (DTC)?
By a physical printout inside the vehicle
Through a specific light or message on the dashboard
By sending an email to the vehicle's registered owner
Through an audible alarm inside the vehicle
What is the significance of the Check Engine Light (CEL) in relation to Diagnostic Trouble Codes (DTCs)?
It indicates that the vehicle needs an oil change
It is a general indicator that the vehicle's engine management system has detected a problem that may generate a DTC
It signals that the vehicle's fuel tank is empty
It only indicates issues with the vehicle's battery
Why are oxygen sensors typically located in the exhaust system?
To measure exhaust system performance
To detect the temperature of the exhaust gases
To adjust the volume of the exhaust sound
To measure the oxygen content of the exhaust gases for optimal fuel combustion
WHAT WAS THE VERY FIRST “ACCIDENT” ON THE FILM – Shake hands with danger?
The Great Train accident.
The Hoist Incident
The Railway Disaster
Fell off the Machine
HOW DID THE TECH LOSE HIS HAND?
He injured it while cooking.
He was born without a hand.
He had an accident when changing the bucket pin.
He lost it in a fire.
WHAT DID THE OLD DUDE FORGET TO TELL THE YOUNG TECH RESULTING IN AN INJURY?
The history of the equipment
The vise was still hot
How to use the equipment
The cost of the equipment
You should never ________ ___ _________ at the same time on a Track vehicle.
remove both tracks
Do not operate an excavator with:
proper safety gear
experienced operators
the final drive disconnected
fully functional machinery
What should you do if someone is bleeding heavily?
Apply a tourniquet immediately
Apply direct pressure to the wound
Give them water to drink
Move them to a sitting position
Which of the following is an example of a control measure to reduce workplace hazards?
Increasing work hours
Providing training and information
Reducing staff numbers
Increasing production targets
What is the main function of Personal Protective Equipment (PPE)?
To enhance employee appearance
To protect employees from workplace hazards
To increase employee comfort
To reduce the need for training
True or False: Loose clothing, long sleeves, neckties, and untied shoes are all hazards to machine operators.
False
A chisel head should be replaced or repaired if it is shaped like a(n) _____.
square
mushroom
What is the primary purpose of conducting a workplace hazard identification?
To increase productivity
To identify potential risks and prevent accidents
To reduce employee wages
To improve employee morale
Which of the following is an example of an engineering control to reduce workplace hazards?
Providing training
Installing ventilation systems
Wearing gloves
Conducting meetings
Which of the following is a common method for controlling workplace hazards?
Elimination
Substitution
Engineering controls
All of the above
Which of the following is a biological hazard that might be found in a workplace?
Asbestos
Loud machinery
Bacteria or viruses
Wet floors
What is the legal requirement for employers regarding workplace safety regulations?
To provide a safe working environment for all employees
To ensure employees work overtime
To offer free meals to employees
To provide entertainment facilities
Which of the following is NOT a component of a manual handling risk assessment?
Task
Individual
Load
Profit
A ______ is a precise measuring tool used by machinists, engineers and other technicians to take extremely accurate and fine measurements.
Students must _____ ______ _____ at the end of class, prioe to leaving.
clean up area
