wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Review 1

Total questions: 90

Worksheet time: 45mins

Name
Class
Date
1.

A list of items to be addressed at a business meeting is the:

a)

agenda.

b)

committee reports.

c)

minutes.

d)

treasurer’s report.

2.

When unused, a portable belt sander should be laid:

a)

on its side.

b)

on the belt.

c)

on the handle.

d)

upside down.

3.

What is used to protect the eyes of a welder from the light rays?

a)

electrode flux

b)

safety glasses

c)

welding gloves

d)

welding helmet

4.

Which type of teeth should a saw blade have to make a smooth cut?

a)

broken

b)

coarse

c)

fine

d)

rip

5.

Outdoor wire classified as UF is used to:

a)

bury underground as feeder wire.

b)

provide mechanical protection where the wires enter and leave the ground.

c)

provide service inside buildings in areas with moisture.

d)

wire inside lights.

6.

Where should construction of a building start?

a)

at the bottom

b)

at the top

c)

on the back side

d)

on the front side

7.

In a business meeting, the chairperson displays the symbol of authority by using the:

a)

gavel.

b)

official jacket.

c)

treasurer’s report.

d)

U.S. flag.

8.

What stationary power tool uses a blade with back-and-forth motion to cut metal?

a)

drill press

b)

grinder

c)

power hacksaw

d)

table saw

9.

What type of electrode is most commonly used when welding farm projects?

a)

E6011

b)

E6041

c)

E7084

d)

E8015

10.

Indoor electrical wire used to provide service in areas with moisture or without moisture is classified as:

a)

SE.

b)

TW.

c)

UF.

d)

USE.

11.

If an electric motor requires 5 amperes of electricity and is designed to be used in a 120-volt electrical circuit, how many watts of current will that motor use in one hour? (Formula: W = V × A)

a)

0.25

b)

24

c)

600

d)

900

12.

What type of connector is turned onto wires to make a pigtail splice and to insulate the splice in one operation?

a)

glued

b)

soldered

c)

solderless

d)

welded

13.

If one is unable to use joist hangers to install floor joists, what has to be cut and nailed for the joists to rest on?

a)

ledgers

b)

rafters

c)

studs

d)

top plates

14.

When laying out a building, taking two equal measurements of the diagonal corners means that the four corners are:

a)

not plumb.

b)

not square.

c)

square.

d)

triangles.

15.

Jacob plans to build a birdhouse, a nail box, a toolbox, and a cattle feeder. Which project should be built from the strongest lumber?

a)

birdhouse

b)

cattle feeder

c)

nail box

d)

toolbox

16.

What welder produces a weld that is stronger and freer of corrosion than that of other welders when welding stainless steel or aluminum?

a)

AC SMAW

b)

DC reverse polarity SMAW

c)

DC straight polarity SMAW

d)

TIG

17.

What tool is used to cut curves in wood?

a)

coping saw

b)

crosscut saw

c)

hatchet

d)

miter saw

18.

What effect does a clean and well-organized shop have on the chance of accidents happening as compared to a dirty, disorganized shop?

a)

Accidents will be more likely to occur in a clean shop.

b)

The number of accidents will double in a clean shop.

c)

Accidents will be less likely to occur in a clean shop.

d)

The occurrence of accidents will not be affected.

19.

Moisture in wood or on the wood’s surface will cause paint to:

a)

be brighter.

b)

be smoother.

c)

blister and peel.

d)

last longer.

20.

When a builder is using platform framing, the subfloor is nailed to the:

a)

ledger.

b)

sill.

c)

joist.

d)

rafter.

21.

Compared to entry-level jobs, professional careers usually require:

a)

less education.

b)

licenses and certification.

c)

more manual labor.

d)

outside work and manual labor.

22.

What wire welder is used in industry as an automatic welder?

a)

AC/DC SMAW

b)

MIG

c)

oxyacetylene

d)

TIG

23.

Agricultural mechanics is a branch of:

a)

anatomy.

b)

biology.

c)

chemistry.

d)

physics.

24.

What portable power tool is used to make straight cuts in wood?

a)

circular saw

b)

cordless drill

c)

hacksaw

d)

metal shears

25.

Which is the best tool to cut a "V" in wood so that the top of a flat head screw will be flush with the wood or just below its surface?

a)

countersink

b)

drill bit

c)

pipe reamer

d)

sander

26.

How many sheets of 4' x 8' exterior-grade plywood are needed to cover an exterior wall of a building that is 8' high and 44' long?

a)

11

b)

15

c)

16

d)

22

27.

Where should the bottom saw teeth point on a portable circular saw blade used to cut wood?

a)

toward the rip fence

b)

toward the center of the blade

c)

toward the front of the saw

d)

toward the rear of the saw

28.

Janna discovers a major problem in balloon-type framing is that there is/are no:

a)

ceiling joists for nailing.

b)

pitch to the roof.

c)

platform to stand on.

d)

trimmer studs to cut.

29.

How many square feet of flooring are needed for a 20' × 20' building?

a)

20

b)

50

c)

250

d)

400

30.

Nicole needs to make doors for a birdhouse, a doghouse, a cattle barn, and a storage building. What door should be made from the strongest materials?

a)

birdhouse

b)

cattle barn

c)

doghouse

d)

storage building

31.

Lee used one tool as a plumb, depth gauge, inside and outside try square, level, miter square, and marking gauge. What tool did he use?

a)

combination square

b)

level

c)

plumb bob

d)

try square

32.

What portable power saw is used in tight situations for remodeling work?

a)

circular saw

b)

miter saw

c)

reciprocating saw

d)

table saw

33.

A stationary power tool with abrasive wheels or wire brush wheels used to sharpen tools, shape metal, or remove rust is a:

a)

drill press.

b)

grinder.

c)

hacksaw.

d)

hammer drill.

34.

The tool used to find and transfer various angles is the:

a)

chalk line reel.

b)

level.

c)

T-bevel.

d)

zigzag rule.

35.

The tool used for ripping and prying wood is the:

a)

half ratchet.

b)

rubber mallet.

c)

sledgehammer.

d)

wrecking bar.

36.

The type of sandpaper that should be used to remove the most amount of wood when sanding is:

a)

coarse.

b)

medium.

c)

fine.

d)

very fine.

37.

What saw uses a blade that moves back and forth to cut curves?

a)

band saw

b)

circular saw

c)

jigsaw

d)

table saw

38.

A try square is used to mark:

a)

15° angles.

b)

30° angles.

c)

90° angles.

d)

curves.

39.

When welding a metal project without electrical power available, what type of arc welder should be used?

a)

AC (alternating current)

b)

AC/DC

c)

DC (direct current)

d)

oxyacetylene

40.

The category of agricultural mechanics that includes irrigation and waste disposal is:

a)

electrification, power, and controls.

b)

power machinery operation.

c)

soil and water mechanical practices.

d)

structure, equipment, and facilities.

41.

A ripsaw blade is used to:

a)

cut circles in wood.

b)

cut with the grain of the wood.

c)

drill holes in metal.

d)

make rounded molding.

42.

The proper tool for removing slag from a weld is a:

a)

ball-peen hammer.

b)

chipping hammer.

c)

torch lighter.

d)

wood chisel.

43.

When metal is prepared for welding, it should be:

a)

cleaned.

b)

oiled.

c)

painted.

d)

weighed.

44.

A round- or flat-headed fastener that is threaded the entire length and has a nut is a:

a)

lag screw.

b)

machine bolt.

c)

sheet-metal screw.

d)

stove bolt.

45.

Which procedure guarantees that more than one member wants an item of business brought before the group?

a)

seconding a motion

b)

tabling a motion

c)

calling for a vote

d)

adjourning the meeting

46.

A gasoline fire is a Class B fire because the fuel is a/an:

a)

combustible metal.

b)

flammable liquid.

c)

nonflammable liquid.

d)

ordinary combustible.

47.

Which type of Supervised Agricultural Experience uses the scientific process to discover new knowledge?

a)

Experimental

b)

Service Learning

c)

Entrepreneurship

d)

School-based Enterprise

48.

Metal thickness, electrode size, and welding position are used to decide the:

a)

amperage setting.

b)

brand of welder.

c)

employee's salary.

d)

voltage setting.

49.

Silas moved to make and sell trailers for $400.00 as an FFA fundraiser, but during discussion it became clear further investigation was needed. Hannah places the motion into the hands of a small group for further study by moving to:

a)

amend the motion.

b)

refer the motion to a committee.

c)

call for a division of the house.

d)

adjourn the meeting.

50.

Which book is best for the club parliamentarian to purchase as the authority on parliamentary procedure?

a)

FFA Advisor’s Manual

b)

FFA Student Handbook

c)

N.C. Pesticide Manual

d)

Robert’s Rules of Order

51.

As technology, the number of people, and the number of homes with lawns increase, the agricultural mechanics industry will:

a)

cease to exist.

b)

get smaller.

c)

remain strong.

d)

remain weak.

52.

Which activity gives students the most opportunities to learn the importance of teamwork?

a)

developing skills in parliamentary procedure

b)

memorizing and reciting a creed

c)

preparing and presenting a speech

d)

working on a group project

53.

A hammer drill is used to drill holes in:

a)

masonry.

b)

metal.

c)

plastic.

d)

wood.

54.

What type of bolts should be used as fasteners for lightweight metal structures?

a)

carriage

b)

machine

c)

plow

d)

stove

55.

On a board fence, the fence will be stronger if the:

a)

boards are thinner.

b)

joints are on the same posts.

c)

joints are staggered.

d)

posts are smaller.

56.

Toggle, mercury, silent, rocker arm, and push button are types of:

a)

single-pole switches.

b)

three-way switches.

c)

four-way switches.

d)

five-way switches.

57.

How many traveler wires should be used for two three-way switches?

a)

none

b)

two

c)

three

d)

four

58.

When using two three-way switches and one four-way switch, how many traveler wires should be used?

a)

one

b)

two

c)

four

d)

eight

59.

A Western Union splice is used:

a)

in the western part of the United States.

b)

where four or more wires are joined.

c)

where strength is required in a splice.

d)

with wire nuts.

60.

How many watts make up a kilowatt?

a)

10

b)

20

c)

90

d)

1,000

61.

What is the unit of measurement of electrical pressure?

a)

kilowatt

b)

ohm

c)

resistance

d)

volt

62.

What is the amperage rating of an electrical device that uses 8 kilowatts of electricity when operated for 10 hours in a 120-volt circuit?

a)

5.00

b)

5.33

c)

6.67

d)

8.00

63.

Outdoor electrical wire used underground as feeder wire is classified as:

a)

DC.

b)

SE or SEU.

c)

TW.

d)

UF

64.

Which electrical device receives only one plug?

a)

15-amp 240-volt receptacle

b)

duplex receptacle

c)

power strip

d)

three-outlet extension cord

65.

If a project is made using both wood and metal, the wood should be fastened to the metal by using:

a)

bolts

b)

glue

c)

nails

d)

welding

66.

If Steve is using a builder’s level to lay out a building, the degree reading when the telescope is turned to mark a corner should be:

a)

15°

b)

30°

c)

45°

d)

90°

67.

What type of welder is best for welding thin steel?

a)

AC

b)

DC

c)

MIG

d)

TIG

68.

The TIG (tungsten inert gas) welding process uses a nonconsumable electrode and:

a)

calcium or lime

b)

carbon dioxide

c)

helium or argon

d)

nitrogen

69.

A current-carrying conductor under electrical pressure is a/an:

a)

fuse

b)

hot wire

c)

insulator

d)

neutral wire

70.

Outdoor wire classified as SE or SEU is used to:

a)

bring electrical service into buildings

b)

bury underground as feeder wire

c)

provide mechanical protection where the wires enter and leave the ground

d)

provide service inside of buildings in areas with moisture

71.

What is a device used to protect circuits from an overload of current?

a)

fuse

b)

hot wire

c)

insulator

d)

neutral wire

72.

Which material will allow electrons to flow readily?

a)

conductor

b)

insulator

c)

plastic

d)

vinyl

73.

What material is a conductor of electricity?

a)

copper

b)

glass

c)

insulation

d)

plastic

74.

If the local rate for electricity is $0.13 per kilowatt-hour, how much should the electric bill be for 120 kilowatt-hours?

a)

$2.50

b)

$6.80

c)

$15.60

d)

$20.40

75.

An example of an analytical Supervised Agricultural Experience is:

a)

working for a plumber.

b)

building garden sheds for homeowners.

c)

restoring a tractor with other FFA members at school.

d)

studying why different types of lighting systems are used in farm buildings.

76.

Who is responsible for constructing terraces to control erosion?

a)

builder

b)

electrician

c)

lawn equipment mechanic

d)

soil conservationist

77.

A person who must be skilled in checking machinery for quality is a/an:

a)

accountant.

b)

inspector.

c)

sales representative.

d)

teacher.

78.

During a chapter discussion of a motion to sell fruit, it became apparent that a small group could better make the decision. How can members appoint a group to act for the chapter?

a)

by calling for a division of assembly

b)

by rising to a point of order

c)

by moving to refer to a committee

d)

by taking the motion to sell fruit from the table

79.

The major advantage of using parliamentary procedure in a business meeting is that:

a)

a small minority can control the meeting.

b)

business is conducted fairly and quickly.

c)

students learn how the courts work.

d)

teachers have more control over meetings.

80.

As a committee chairperson, Lori helped develop the Chapter Program of Activities. The things she learned can best be used later in an agricultural engineering association to:

a)

conduct safety inspections.

b)

cook and serve food.

c)

keep financial records.

d)

set goals and develop plans.

81.

Which fire extinguisher is good for only wood fires?

a)

carbon dioxide (CO₂) extinguisher

b)

dry chemical extinguisher

c)

foam extinguisher

d)

pressurized water extinguisher

82.

The two things that combine to cause hearing damage from noise are the hours exposed and the level of noise measured in:

a)

ohms.

b)

decibels.

c)

foot-pounds.

d)

liters.

83.

To help avoid mistakes and to reduce the amount of wasted materials, a good rule to follow is:

a)

measure once, cut twice.

b)

measure twice, cut once.

c)

measure with three different tapes.

d)

saw out the marked line.

84.

The type of handsaw used to cut wood with the grain is a:

a)

combination saw.

b)

coping saw.

c)

hand crosscut saw.

d)

hand ripsaw.

85.

What color in the safety color code is used to improve visibility by highlighting edges of machines?

a)

ivory

b)

orange

c)

red

d)

yellow

86.

What color in the safety color code identifies the location of safety and first aid equipment?

a)

blue

b)

green

c)

orange

d)

red

87.

What pliers are used to reach into recessed areas?

a)

long-nose pliers

b)

side-cutting pliers

c)

slip-joint pliers

d)

vise-grip pliers

88.

What is the proper procedure to use if an electrode sticks to metal?

a)

Decrease amperage.

b)

Increase amperage.

c)

Move the electrode holder back and forth.

d)

Use a smaller diameter electrode.

89.

The seasonal nature of agriculture plays a major role in what area when one is considering a construction or repair job?

a)

brand of building materials

b)

building supply company being used

c)

quality of work

d)

time of year

90.

If a builder uses precut studs for platform-type framing, the lumber needed for a door header is two pieces measuring:

a)

1" × 4".

b)

1" × 6".

c)

2" × 4".

d)

2" × 10".