wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

07. ACR-104 UNIT 22 PRACTICE TEST

Total questions: 10

Worksheet time: 5mins

Name
Class
Date
1.

A device that passes outside air over water to remove the system heat is a ______

a)

cooling tower

b)

shell-and-tube condenser

c)

water tower

d)

shell-and-coil condensers

2.

Natural draft, forced draft, and evaporative are all types of _______.

a)

refrigerant phases

b)

cooling towers

c)

wastewater systems

d)

package refrigeration systems

3.

Condensing temperatures can be reduced by reducing the condenser surface area.

a)

True

b)

False

4.

Check My Work

For every 1 degree rise in suction gas temperature returning to the compressor, there will be a _____ degree rise in the compressor’s discharge temperature.

a)

1

b)

30

c)

5

d)

10

5.

A __________ can be piped into the high-side of the system to cycle the condenser fan on and off during a low ambient condition.

a)

thermostatic expansion valve (TXV)

b)

pressure control

c)

head pressure regulator (HPR)

d)

thermostat

6.

On a system that uses condenser flooding to control head pressure during low ambient conditions, the receiver should be sized so that it is ___________.

a)

100% full when it contains the entire system charge

b)

50% full at all times, during all conditions

c)

80% full when it contains the entire system charge

d)

20% full when the system is operating during a low ambient condition

7.

Any refrigerant receiver should be able to hold all of the system’s charge and still have a 25% vapor head for safety.

a)

True

b)

False

8.

Condenser flooding is accomplished by _____________ in both mild and cold weather to keep the head pressure constant.

a)

having enough refrigerant in the system to raise the suction pressure

b)

having enough refrigerant in the system to flood the condenser

c)

applying heat to the compressor crankcase

d)

having enough refrigerant in the system to flood the evaporator

9.

Low ambient controls are used on ___________ to maintain head pressure during low ambient conditions.

a)

waste water systems

b)

water-cooled condensers

c)

cooling towers

d)

air-cooled condensers

10.

__________ systems use water once, it is then piped to a drain.

a)

Air-cooled condenser

b)

Wastewater

c)

Recirculating water

d)

Package