wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Meeting Quiz 02.06.2025

Total questions: 25

Worksheet time: 3hrs 38mins

Name
Class
Date
1.

A FLOW TEST AT THE HIGHEST, MOST REMOTE, OR DEAD-END HOSE CONNECTION OF EACH ZONE OF A STANDPIPE SYSTEM SHALL BE PERFORMED:

a)

ANNUALLY

b)

EVERY 2 YEARS

c)

EVERY 3 YEARS

d)

EVERY 5 YEARS

2.

WHICH CLASS OF STANDPIPE IS FOR FIRE DEPARTMENT USE

a)

CLASS 1

b)

CLASS 2

c)

CLASS 3

d)

CLASS 1 AND 3

3.

FLOW TESTS OF HYDRANTS SHALL BE MAINTAINED _______MINUTE(S).

a)

1

b)

5

c)

15

d)

30

4.

THE SUPPLY OF SPARE SPRINKLERS:

a)

SHALL NOT BE EXPOSED TO TEMPERTURES IN EXCESS OF 120F

b)

SHALL BE LOCATED AT THE RISER

c)

SHALL INCLUDE A MINIMUM OF TWO SPRINKLERS OF EACH TYPE AND TEMPERTURE INSTALLED

d)

ALL THE ABOVE

5.

FLOW TESTS OF PRIVATE FIRE SERVICE MAINS SHALL BE PERFORMED:

a)

SEMI-ANNUALLY

b)

ANNUALLY

c)

EVERY 3 YEARS

d)

EVERY 5 YEARS

6.

SAMPLE TESTING OF STANDARD SPRINKLERS SHALL BE PERFORMED

a)

ONLY IF MANUFACTURED PRIOR TO 1929

b)

AFTER 10 YEARS

c)

AFTER 20 YEARS

d)

AFTER 50 YEARS

7.

WHAT % OF WATER BASED FIRE PROTECTION SYSTEM FAILURES ARE CAUSED BY CLOSED CONTROL VALVES

a)

10

b)

20

c)

30

d)

40

8.

DRY BARREL HYDRANTS SHALL BE INSPECTED AFTER EACH USE AND:

a)

QUARTERLY

b)

SEMI-ANNUALLY

c)

ANNUALLY

d)

EVERY 5 YEARS

9.

HYDROSTATIC TEST PRESSURE ON A STANDPIPE OR HOSE SYSTEM SHALL BE MEASURED:

a)

AT THE FDC

b)

AT THE TOP OF THE SYSTEM

c)

MID-POINTOF THE SYSTEM

d)

AT THE BOTTOM OF THE SYSTEM

10.

VALVES CONTROLLING FLOW TO ________________ ARE NOT REQUIRED TO BE LOCKED,TAMPERED, OR SEALED.

a)

PREACTION SYSTEMS PROTECTING FREEZERS

b)

FIRE HOSES

c)

ELEVATOR EQUIPMENT ROOMS AND SHAFTS

d)

HAZARDOUS MATERIALS STORAGE AREAS

11.
Sprinklers manufactured using fast-response elements that have been in service for ____ years shall be replaced or representative samples shall be tested and then retested at 10-year intervals
a)
5
b)
10
c)
15
d)
20
12.
Sprinklers manufactured prior to 1920 shall be _____.
a)
cleaned
b)
replaced
c)
checked
d)
inspected
13.
Mechanical waterflow alarm devices including, but not limited to, water motor gongs, shall be tested _______.
a)
weekly
b)
monthly
c)
quarterly
d)
annually
14.
Vane-type and pressure switch type waterflow alarm devices shall be tested ______.
a)
weekly
b)
monthly
c)
semiannually
d)
annually
15.
Fire pumps_____ be taken out of service during testing unless constantly attended by qualified personnel or all impairment procedures contained in Chapter 15 are followed.
a)
should sometimes
b)
shall not
c)
shall
d)
should
16.
Testing waterflow alarm devices on wet pipe systems shall be accomplished_____.
a)
by operating a manual pull station
b)
by opening the inspector ’s test connection
c)
by opening the main drain connection
d)
by draining the system down
17.
What is the definition of "Backflow Preventer"?
a)
A device to prevent water from flowing back into the fire protection system.
b)
A device to prevent the reverse flow of water. [NFPA 25 (2017) 3.3.4]
c)
A valve used to control water flow in one direction.
d)
A mechanism to regulate water pressure.
18.
What is the meaning of "Fire Pump" in NFPA 25 (2017)?
a)
A pump specifically used for firefighting.
b)
A pump that supplies water to fire hose reels.
c)
A pump providing water to fire protection systems. [NFPA 25 (2017) 3.3.14]
d)
A portable pump used by firefighters.
19.
Which chapter in NFPA 25 will you find the owner’s responsibilities for inspection, testing, and maintenance?
a)
4
b)
5
c)
6
d)
7
20.
Which chapter in NFPA 25 will you find the requirements for inspecting sprinklers?
a)
3
b)
4
c)
5
d)
6
21.
Which chapter in NFPA 25 will you find requirements for inspecting, testing, and maintenance of system control valves?
a)
10
b)
11
c)
12
d)
13
22.
Which chapter in NFPA 25 would you find the scope, purpose and application of the standard?
a)
1
b)
2
c)
3
d)
4
23.
Which chapter in NFPA 25 would you find a list of other standards referenced in the standard?
a)
1
b)
2
c)
3
d)
4
24.
Which chapter in NFPA 25 would you find the definition of testing?
a)
1
b)
2
c)
3
d)
4
25.
The chapter to find ITM requirements for backflow prevention assemblies is chapter___.
a)
12
b)
13
c)
14
d)
15

Similar Resources on Wayground

NFPA 14 (4th Quarter 2025)

24 questions

NFPA 14 (4th Quarter 2025)

quiz

Worksheet

•

Professional Development

EVALUACION INTERNET

30 questions

EVALUACION INTERNET

quiz

Worksheet

•

Professional Development

3005 MEN, SELV, PELV Electrical Protection 2

20 questions

3005 MEN, SELV, PELV Electrical Protection 2

quiz

Worksheet

•

Professional Development