NEW
Font size
WorksheetsThe Coping Saw Quiz
Total questions: 15
Worksheet time: 8mins
What is the primary use of a coping saw?
Cutting metal sheets
Cutting unusual shapes or curves in wood
Drilling holes in wood
Sanding wood surfaces
What is the length of the blade used in a coping saw?
100mm
150mm
200mm
250mm
What must be done to fit a new blade into the coping saw?
The frame must be heated
The frame must be flexed
The blade must be bent
The handle must be removed
In which direction should the teeth of the blade point when fitting it to the coping saw?
Downwards
Upwards
Away from the handle
Towards the handle
What is a modern alternative to using a coping saw for cutting shapes?
Machine fretsaws
Circular saws
Hand drills
Electric sanders
How can internal shapes be cut using a coping saw?
By cutting from the edge
By removing the blade, passing it through a drilled hole, and refitting it
By using a special internal cutting blade
By using a different saw
What is the correct sawing motion when using a coping saw?
Random motion
Straight and forward direction
Zigzag motion
Circular motion
What determines the curve being cut when using a coping saw?
The length of the blade
The maneuvering of the wood by the supporting hand
The angle of the blade
The speed of sawing
What should be done to the material when using a coping saw to cut thin material?
Clamp it to a wall
Place it on the floor
Support it on the surface of a bench and hold it down firmly
Hold it loosely
What happens if the blade is fitted the opposite way in a coping saw?
It will be very difficult, if not impossible, to use
It will cut faster
It will cut smoother
It will not fit into the frame
What is a test of skill when using a coping saw?
The speed of cutting
The ability to control the saw
The weight of the saw
The sharpness of the blade
What is the function of the pins at each end of the blade?
To sharpen the blade
To hold the blade to the frame
To adjust the blade length
To change the blade angle
What should be done if machine fretsaws are not available?
Use a hammer and chisel
Wait until a machine is available
Use a coping saw
Use a different type of saw
What is the first step in cutting an internal shape with a coping saw?
Fit a new blade
Drill a hole in the material
Remove the blade from the saw
Cut from the edge
What is the purpose of flexing the frame when fitting a new blade?
To make the frame more flexible
To adjust the blade tension
To change the blade angle
To fit the blade into the slotted pins
