WorksheetsAJD20503 Aircraft Maintenance and Repair Tool and Equipment Quiz
Total questions: 25
Worksheet time: 13mins
What is the role of structural fasteners in aircraft repair?
To join metal parts together
To enhance the appearance
To reduce weight
To improve aerodynamics
What is a combination square used for?
Measuring angles and finding the center of a shaft.
Measuring weight and speed.
Measuring temperature and pressure.
Measuring length and width.
What is a rivet spacer used for?
To cut metal sheets
To space rivets evenly
To polish metal surfaces
To weld metal pieces
What should you not use a prick punch for?
To make indentations
To remove objects from holes
To mark metal surfaces
To transfer dimensions
What should you avoid when using a center punch?
Using it on wood
Striking it with excessive force
Using it on plastic
Striking it lightly
What is the first step in using an awl according to the procedures provided?
Place the metal to be scribed on a flat surface.
Remove the protective cover from the awl.
Hold the straightedge firmly.
Replace the protective cover on the awl.
What is a feature of the pneumatic circular-cutting saw?
It is used for painting.
It is similar to the Kett saw.
It cannot cut metal.
It is used for measuring.
What is the advantage of the Kett saw's head design?
It is fixed in one position.
It can be turned to any desired angle.
It is used for painting.
It is used for measuring.
What is a key feature of the Kett saw?
It requires a starting hole.
It can start a cut anywhere on a sheet of metal.
It cannot cut inside or outside radius.
It is only used for wood.
What is the purpose of holding the straightedge firmly when using an awl?
To cut the metal.
To ensure a straight line is scribed.
To polish the surface.
To measure thickness.
What is the purpose of the backstop on squaring shears?
To hold the metal in place
To ensure pieces are cut to the same dimensions
To polish the metal surface
To heat the metal
What is the purpose of the scale on the squaring fence?
To measure the thickness of the metal
To ensure accurate placement
To polish the metal surface
To heat the metal
What is the purpose of the foot pedal in hydraulic or pneumatic squaring shears?
To operate the upper blade
To measure the thickness of the metal
To polish the metal surface
To heat the metal
What is the role of the cutting blade in a throatless shear?
To polish the metal
To cut the metal
To heat the metal
To measure the metal thickness
Which type of sander is often used in a metal shop?
Orbital sander
Disc sander
Drum sander
Detail sander
What is the main advantage of using a wet grinder?
It is cheaper
It reduces heat produced by grinding
It is faster
It is more colorful
What is the main use of a die grinder?
To cut wood
To turn a mounted cutoff wheel at high speed
To paint surfaces
To measure angles
What should be done if a drill bit is larger than the hole?
Use it without changes
Rotate it by hand
Sharpen it
Bend it
What should be avoided when using a drill press to prevent parts from slipping?
Using a broken drill
Clamping the part properly
Using a sleeve-clamping vise
Adjusting the drill speed
What is the role of the upper front roll in a slip roll former?
To cut the metal sheet.
To raise or lower for inserting the sheet of metal.
To polish the metal surface.
To weld the metal parts.
What is the primary function of a deburring tool?
To polish the surface
To measure thickness
To remove sharp edges from metal
To cut metal sheets
What should you ensure when using a band saw?
That the saw is unplugged
That the material is secured properly
That the blade is not aligned
That the blade is dull
What is the purpose of a caliper in metalworking?
To cut metal sheets
To polish surfaces
To measure dimensions accurately
To measure the temperature of metal
What is the main purpose of a metal file?
To polish surfaces
To smooth rough edges
To measure dimensions
To cut metal sheets
What is a common use for a bench grinder?
To cut wood
To paint surfaces
To sharpen tools
To measure angles
