Font size
WorksheetsMechanical Assembly Tips Quiz
Total questions: 1
Worksheet time: 42mins
What is the primary purpose of lifts in V5 Robot Lift Systems?
To lift manipulators vertically or lift the robot off the ground
To increase the speed of the robot
To enhance the robot's battery life
To improve the robot's aesthetics
What is the main function of the gear or sprocket/chain system in lifts?
To decorate the lift
To activate the lift
To cool the lift
To charge the lift
What brings telescoping lifts back down?
Hydraulic pressure
Gravity
Manual force
Electric motors
Where is the pulley placed in a telescoping lift?
At the bottom of the Linear Slide Track
At the top of the Linear Slide Track
In the middle of the Linear Slide Track
Outside the Linear Slide Track
What can you do with the graphic of the V5 Telescoping Lift?
Only view it from one angle
Rotate and zoom in and out
Change its color
Disassemble it
What allows the robot to be mobile according to the text?
Hydraulic systems
Wheels, tank treads, or tracks
Propellers
Magnetic levitation
What might the sizing rules for a robot include?
Maximum weight
Maximum height, width, and length
Minimum speed
Minimum battery life
What is one advantage of the VEX EDR system?
Limited design options
Endless opportunity for creativity
Difficult assembly process
Fixed chassis shape
What are the two material options available for VEX structural metal pieces?
Steel and plastic
Aluminum and plastic
Steel and aluminum
Copper and aluminum
What should be considered when selecting a structural metal material?
The color of the material
The availability of the material
The advantages and disadvantages based on the material
The brand of the material
What was the original material available when the VEX EDR system was introduced?
Aluminum
Steel
Plastic
Wood
What shape are the holes in the metal plates, beams, and bars for easy entry of fasteners?
Circular
Triangular
Square
Hexagonal
What might steel C-Channel be used for in the chassis?
To reduce cost
To provide strength for a large arm or lift system
To make it lighter
To make it more flexible
What is applied to a shaft or screw when it is inserted through a reinforced hole?
A large stress.
A magnetic field.
A chemical coating.
A thermal treatment.
What is considered excessive when connecting two 5 hole C-Channels?
Using no screws
Using one screw
Placing a screw through all 25 intersecting holes
Using two screws
What type of fasteners are mentioned as being faster to assemble for a classroom chassis?
Bolts and Nuts
Bearing Attachment Rivets, #8-32 Hex Nuts, Nut Bars, and Thumb Screws
Glue and Tape
Welding and Soldering
Why is it essential to have a well-designed and well-assembled chassis?
It improves the color of the robot
The success or failure of the robot can depend on the chassis
It makes the robot lighter
It reduces the cost of the robot
What should you be cautious of when handling material that has just been cut?
Extreme Temperature
Sharp Edges
Electrical Shock
Chemical Exposure
What is a drivetrain sometimes referred to as?
Engine base
Drive base
Wheel base
Gear base
What is the programming level for a Holonomic drive?
Advanced
Intermediate
Basic to Intermediate
Beginner
