Tech A says that the PPS consists of a silicone filled sensor pad. Tech B says that the PPS can be a pressure sensor. Who is correct?

Tech A states that the PPS is used to monitor the height of a passenger in the RF seat and communicate the status to the SDM (sensing and diagnostic module). Tech B states that depending on the voltage returned from the PPS sensor, the SDM decides to either to deploy or suppress both the instrument panel and RF side impact air bag. Who is correct?

True or false? Not all air bags use nitrogen gas to inflate the bag.

The air bag “module” is the air bag and inflator assembly packaged into a single unit or module.

The air bag “module” is the control unit for the SRS system.

Tech A says that an “airbag module” is not the same as a “restraint control module”. Tech B says the SIR and SRS refer to the same system. Who is correct?

Where are side air bags deployed from? Select all that apply

The system self-check is also referred to as the SRS “prove-out”.

How often is an SIR prove-out performed?

An illuminated AIR BAG MIL tells the vehicle operator that the Airbag system is active and ready to function.

This crash/impact sensor has one terminal of the sensor connected to a ramp and the second terminal is connected to a spring contact extending through an opening in the ramp but not touching the ramp.

Besides inertia lock retractors, vehicles may be equipped with electric or pyrotechnic-type ____________.

Reverse sensors can detect obstacles up to 2m (6ft) from the rear bumper of a vehicle? 

This ADAS system alerts the driver through steering wheel vibrations and a visual alert in the instrument cluster message center.

What are the two types of Lane-keep/Lane departure warning systems?

The "blind-spot" detection indicator is commonly mounted on or near the rearview mirror.

This ADAS system uses Radar waves to determine distance to other vehicles and relative speed.

Tech A states that Radar uses electromagnetic waves (radio waves or microwaves) to detect objects. Tech B states that Ultrasonic sensors use sound waves (ultrasonic pulses). Who is correct?

Parking Aid ultrasonic sensors are solid state components that require only one wire connection.

The lane keeping aid assists the driver by automatically providing steering torque to help the driver keep the vehicle in the lane.

_______ can be defined as digital technologies that help drivers in routine navigation and parking.

Environmental conditions (sun angles, shadows, snow, heavy rain or fog) can render the Lane-keeping system inoperable.

Which of the following can be a quick, and accurate method for testing ultrasonic sensors during a parking assist fault diagnosis?

What must be performed when a heated windshield is replaced on a vehicle with a forward facing camera?