What is the most important tool in drawing?

It is a tool used for fastening the drawing paper on the drawing table or drawing board.

Which of the following grades of pencil are used for general purposes?

Which drawing instrument is similar to a divider when used?

What tool is a three-sided ruler, which typically has two equal sides meeting at a 90 degree angle and to a third side at 45, 30, including 60 degree angles?

It is a tool used in order to reproduce the measurement of an object to any size.

A drawing instrument used when transferring measurements, dividing lines and arcs into the desired number of equal parts.

How will you protect the rest of the drawing when removing unnecessary lines used?

The symbol shown below is the representation of __________.

The symbol shown below is the representation of ____________.

What line is also called object line or outline of an object.

A broken line at the center of the line with arrow heads in order to show the measurement or size of the object is called ____.

Lines where indicate the hidden features of an object is called ____.

We call these lines that extend from the height, width, and length of the views so that the measurements can be indicated.

A type of line drawn in light weight that is used to show that a part of an object has been cut off.

It is like the long break line that is used to show the part of an object has been cut off.

What type of axonometric drawing shows the three surfaces of the object tilted 30 degrees in front of the observer?

What type of axonometric drawing shows the angle that is used for the horizontal planes varies according to the angle of view that has been chosen?

What type of axonometric drawing where in the cube is positioned in the way that no axes and angles are equal when projected to the plane of projection?

A drawing shows more than one view of an object is called ____.

It is called the system for graphic representation of an object by a line drawing on a flat surface.

A type of oblique drawing where in the depth axis lines are drawn in one-half scale.

What type of oblique drawing where in the depth axis lines vary from one-half to full size?

Which of the following is correct about isometric projection?

An angle or degrees use in Isometric scale.

How many points does an isometric drawing consists of?

The angle between the Isometric axis is ____.

Isometric lines are ___ to the axes.

Circles appears as ____ in Isometric Drawing

This type of pictorial drawing represent ___.

Vertical lines are shown ____ in Isometric Drawing

The horizontal lines in an Isometric Drawing are __ degrees from the horizon.

Isometric drawings falls into the category of

Isometric drawing shows object in__ dimensions.

A type of perspective drawing which use only one vanishing point.

Perspective drawing which use three vanishing point.

This type of perspective drawing use two vanishing point.

It is called the plane of the ground.

The imaginary intersection of the sky and the open sea is called ____.

It is called an imaginary vertical plane where the perspective view is assumed or imagined to be projected or drawn.

It is called the observer's eyes, not the point on the ground where the observer stands.

Which of the following should we considered first in angular perspective?

Which of the following is not a principle of perspective?

What do you call a pictorial view seen by observer's eye?

The imaginary point of intersection of lines projected from the receding horizontal edges of an object is called ______.

A plane upon which the top view is projected.

An imaginary horizontal plane in which the level is with the observer's eyes and the horizon is called ________.