WorksheetsMSSC10 and 11
Total questions: 30
Worksheet time: 15mins
Fire is a chemical reaction between what two substance
Oxygen and fuel
Heat and oxygen
Fuel and heat
An odor is added to ______________so that it is detected eas
Oxygen
Cleaning fluids
Paint
Natural gas
Fires that involve combustible and flammable materials are classified as
A, B, C
A, B, D
A, C, D
B, C, D
An important rule to follow for fire safety and containment is _________.
Open all windows and doors to release smoke and fumes.
Remove unnecessary fire suppressant equipment from every workstation
Keep exit paths cleared and doors closed
Fight fires with available extinguishers until the fire department arrives.
In the United States, how many classes of fire are there?
2
4
6
8
A paper fire can be safely extinguished using a Class ____ fire extinguisher.
A
B
C
D
What type of hazard can cause fires, burns, shocks, and electrocution?
Electrical
Fire
Environmental
Chemical
When a small fire is noticed near a cabinet of flammable materials, you should first
Sound alarm
Put it out with a portable fire extinguisher
Remove the flammable material to a safe place
Run to the nearest phone call for help
What type of fire extinguisher is used to extinguish only flammable liquid or
electrical fires?
Dry chemical
APW
Halon
Carbon dioxide
In order to allow employees to exit safely, it is important to maintain the fire escape route to reduce
Over crowding
Chemicals
Hazards
Fire
An employee should use a fire extinguisher only if they ______
Cannot reach the fire department
Know where the fire is located
Can reach the fire
Are trained in their use
______recommends that works inspect and test all equipment, assuming all to be
energized until proven deenergized.
EPA
OSHA
DOT
ISO
To avoid potential fires, combustible materials must be kept a minimum of ____
feet from any welding or cutting areas or any other heat source.
10
35
65
100
The dates and charge on the fire extinguishers should be checked
When the fire alarm control panel (FACP) is repaired
When inspecting the fire sprinkler system
During the yearly fire system inspection
When performing a monthly inspection of fire system.
Documentation of each drill should include a description of any problems
observed in order to _______________.
Reprimand any employee that does not take the drill seriously.
Communicate to the fire department problems in the building.
Correct the problems and improve future fire drill performance.
Create an alternate evacuation plan.
To quickly exit your work area during a fire or emergency __________.
Explore your area and determine the best way outside
Use the employer-approved fire escape route
Follow others in your area to an exit
Stay in your area until your supervisor guides you out.
The class of fire determines the __________.
Type of flammable material
The temperature at which the fire burns
The method of extinguishing a fire
The location of the fire
Flammable liquids should be stored in _________
Closed containers with oily rags
A signed and locked cabinet
A well-ventilated area
An open container
The first step in fire and electrical safety is __________.
Training employees in CPR in the event of an electrical shock
Educating employees on fire hazards and prevention
Training employees to use a fire extinguisher.
Teaching employees how to report a fire.
If the third, round grounding pin is missing from an electrical cord you should
Use it only on ungrounded receptacles.
Use an adapter to plug it into a three-pin receptacle.
Use it only if the tool is double insulated.
Never use it.
Companies are responsible for training employees on the ECP including the safe
application, use, and attachment of energy controls.
True
False
If an operator does not test equipment after it is locked out __________.
it does not matter because the lockout prevents energizing the power.
the circuit will not operate.
they should apply a tag stating so
they should be retrained.
Which of the following was designed to prevent employee injury caused from the
unexpected start-up of machines or equipment, or the release of hazardous
energy while servicing or maintenance is performed?
Lockout / Tagout Standard
OSHA Standard
Safety Standard
CFR Standard
Which of the following is NOT one of the major factors of uncontrolled hazardous
energy fatalities recorded by the FACE program from 1982-1997?
Failure to verify that the energy source was de-energized before beginning
work.
Failure to completely de-energize, isolate, block, and/or dissipate the
energy source.
Failure to verify that the energy source was completely energized before
beginning work.
Failure to lockout / tagout energy control devices and isolation points after
de-energization
LOTO devices can prevent the release of which of the following during machine or equipment maintenance and repair?
Tooling
Flying chips
Hazardous energy
PPE
Lockout devices are typically attached with which of the following?
A Twist tie.
A heavy lock or chain
A heavy string or rope
A timer
A requirement of a lockout device is that to be removed, it must be substantial
enough to withstand which of the following?
Excessive weakness
Excessive force
Excessive heat
Excessive time
What is the correct procedural order for performing a lockout/tagout?
E-stop, tag, lock
Tag, hasp, lock
Tag, E-stop, lock
Hasp, lock, tag
Which of the following is NOT a requirement for warning tags?
Able to be attached by hand.
Non-reusable
Attached as closely as possible to the energy source.
Easily removable
What does the acronym ECP mean?
Emergency Caution Program
Energy Caution Policy
Emergency Contingency Plan
Energy Control Program
