Wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

ESAS 5-1

Total questions: 50

Worksheet time: 25mins

Name
Class
Date
1.

Partially protected locations under canopies, marquees, roofed open porches, and like locations, and interior locations subject to moderate degrees of moisture, such as some basements, some barns, and some cold-storage warehouses.

a)

Dry

b)

Damp

c)

Moist

d)

Wet

2.

A location not normally subject to dampness or wetness. A location classified as ____ may be temporarily subject to dampness or wetness, as in the case of a building under construction.

a)

Dry

b)

Damp

c)

Moist

d)

Wet

3.

Combination of laminar and turbulent flow.

a)

Critical

b)

Continuous

c)

Laminar

d)

Turbulent

4.

A system or circuit conductor that is intentionally grounded.

a)

Grounding Conductor

b)

Grounded Conductor

c)

Grounding Electrode Conductor

d)

Grounding Equipment

5.

Most common pressure measuring device use today

a)

Bourdon tube gauge

b)

Manometer

c)

Kelvin gauge

d)

Barometer

6.

Poisson’s Ratio is the ratio of the

a)

Unit lateral deformation to the unit longitudinal deformation

b)

Unit stress to unit strain

c)

Elastic limit to proportional limit

d)

Shear strain to compressive strain

7.

Which is not covered by Thermodynamics?

a)

Utilization of energy

b)

Transformation of energy

c)

Transfer of energy

d)

Storage of Energy

8.

What is the SI unit of mass?

a)

Newton

b)

Kilogram

c)

Slug

d)

Pound

9.

What is the SI unit of length?

a)

Meter

b)

Centimeter

c)

Feet

d)

Inches

10.

The differential of the shear equation is which one of the following?

a)

Load on the beam

b)

Tensile strength of beam

c)

Bending moment of the beam

d)

Slope of the elastic curve

11.

Under very slow deformation and at high temperature, it is possible to have some plastic flow in a crystal at a shear stress lower than the critical shear stress. What is this phenomenon called?

a)

Slip

b)

Twinning

c)

Creep

d)

Bending

12.

Which of the following elements and compounds is unstable in its pure form?

a)

Sodium (Na)

b)

Helium (He)

c)

Carbon dioxide (CO₂)

d)

Neon (Ne)

13.

BIOS stands for

a)

Basic Input Output Society

b)

Basic Input Output System

c)

Base Input Output Society

d)

Base Input Output System

14.

Mandarin Bank advertises 9.5% account that yields 9.84% annually. Find how often interest is compounded.

a)

Monthly

b)

Bimonthly

c)

Quarterly

d)

Annually

15.

The minimum diameter of a steel ground electrode is

a)

10 mm

b)

12 mm

c)

14 mm

d)

16 mm

16.

The branch of mechanics which deals with bodies in motion is known as

a)

Statics

b)

Dynamics

c)

Kinetics

d)

Kinematics

17.

Bernoulli’s equation is based on

a)

The second law of motion

b)

The third law of motion

c)

The conservation of momentum

d)

The conservation of energy

18.

Pluto travels from perihelion to aphelion. What is the work done by gravity on Pluto?

a)

zero

b)

negative

c)

positive

d)

undetermined

19.

Carnot cycle is maximum efficiency in ______ engine.

a)

steam

b)

gas

c)

reversible

d)

well lubricated

20.

It is the interest earned by the principal which is added to the principal and will also earn an interest for the succeeding periods.

a)

compound interest

b)

simple interest

c)

discount

d)

interest rate

21.

An ice with mass of 0.9 kg is freely floating in water. Find the buoyant force experienced by the ice.

a)

7.8 N

b)

8.82 N

c)

10.2 N

d)

9.64 N

22.

What refers to the case hardening process by which the carbon content of the steel near the surface of a part is increased?

a)

Carburizing

b)

Annealing

c)

Normalizing

d)

Martempering

23.

If two balls are thrown with the same initial velocity, with one ball thrown 20 degrees above the horizontal and the other thrown horizontally. Neglecting air resistance, which ball will hit the ground with the greatest speed?

a)

the ones thrown horizontally

b)

the ones thrown 20 degrees angle

c)

both balls will land in the same velocity

d)

lack of data

24.

If an automobile wheel 32 in diameter rotates at 800 r/min, what is the speed of the car in mph?

a)

12.1

b)

24.2

c)

76.2

d)

152.4

25.

MS-DOS is a type of?

a)

system software

b)

operating system

c)

application software

d)

system architecture

26.

MS-WORD is a type of?

a)

system software

b)

operating system

c)

application software

d)

system architecture

27.

What is CD ROM?

a)

Compact Disk Read Only Memory

b)

Compact Data Read Only Memory

c)

Compatible Disk Read Only Memory

d)

Compatible Data Read Only Memory

28.

What is the octal equivalent of the hexadecimal number EE?

a)

356

b)

365

c)

653

d)

635

29.

(III) base 2 + (III) base 2 = (_____) base 2.

a)

11011

b)

11101

c)

11110

d)

11100

30.

The second law of thermodynamics can be stated as: I - Heat flows spontaneously from a hot object to a cold one, but not the reverse; II - Natural processes tend to move toward a state of greater disorder or greater entropy.

a)

I only

b)

II only

c)

I and II

d)

Neither I nor II

31.

Who is not a member of the Board of EE?

a)

Francis V. Mapile

b)

Fortunato C. Leynes

c)

Gregorio T. Cayetano

d)

Jaime V. Mendoza

32.

For REE board examination, the passing general average is 70% provided there is no grade below ______ in any of the 3 subjects.

a)

50%

b)

60%

c)

65%

d)

40%

33.

What is the weight percentage of electrical engineering professional subjects?

a)

35

b)

40

c)

45

d)

25

34.

In an ideal gas, both pressure and temperature increase to twice the original pressure and temperature respectively. If the original volume is Vo, then the new volume is:

a)

2Vo

b)

Vo

c)

Vo/2

d)

4Vo

35.

What is the interest of P 8,600 after 4 years at 12% simple interest rate?

a)

P 4,161

b)

P 4,116

c)

P 4,218

d)

P 4,128

36.

The ampacity of the fuse should be 125% of the continuous load current is covered by:

a)

installation design

b)

wiring design

c)

manufacturing design

d)

construction design

37.

Generators and motors should be dust proof is covered by:

a)

installation design

b)

manufacturing design

c)

wiring design

d)

construction design

38.

In thermodynamics we focus our attention on which form of energy?

a)

kinetic

b)

potential

c)

internal

d)

total

39.

A beam with rectangular cross-section with breadth of 20 cm. Determine the depth of the beam if the maximum shearing stress in the beam is 30 kg/cm² and Vmax = 10,000 kg.

a)

25 cm

b)

23 cm

c)

20 cm

d)

30 cm

40.

What is a coal that has been previously burned in an oxygen-poor environment?

a)

Tuyere

b)

Coke

c)

Diamond

d)

Hematite

41.

What is the most common reinforcement for polymer composites?

a)

Boron

b)

Ceramic

c)

Graphite

d)

Glass fiber

42.

What is the principle behind fiber optics?

a)

Reflection

b)

Refraction

c)

Diffraction

d)

Dispersion

43.

A conductor used to connect equipment or the grounded circuit of a wiring system to a grounding electrode or electrodes.

a)

Grounding Conductor

b)

Grounded Conductor

c)

Grounding Electrode Conductor

d)

Grounding Equipment

44.

A loan of P 4,000 is made for a period of 16 months at a simple discount rate of 7%, what future amount is due at the end of the loan period?

a)

P 4,373.33

b)

P 4,301.08

c)

P 4,401.43

d)

P 4,411.76

45.

When magma rocks cool, these rocks are called

a)

granite

b)

sedimentary rocks

c)

igneous rocks

d)

metamorphic rocks

46.

The conductor used to connect the grounding electrode to the equipment grounding conductor to the grounded conductor, or to both, of the circuit at the service equipment or at the source of a separately derived system.

a)

Grounding Conductor

b)

Grounded Conductor

c)

Grounding Electrode Conductor

d)

Grounding Equipment

47.

A device intended for the protection of personnel that functions to de-energize a circuit or portion thereof within an established period of time when a current to ground exceeds some predetermined value that is less than that required to operate the overcurrent protective device of the supply circuit.

a)

Grounding Conductor

b)

Ground-Fault Circuit Interrupter

c)

Grounding Conductor Equipment

d)

Ground-Fault Protection of Equipment

48.

A 40-kg boy walks on a 60-kg log with the speed of 1.5 m/s. What is the speed of the log with respect to the shore?

a)

1 m/s

b)

0.36 m/s

c)

0.4 m/s

d)

0.8 m/s

49.

The maximum bending moment of a beam simply supported at both ends and subject to a total load W uniformly distributed over its length L is expressed by the formula.

a)

WL/8

b)

WL²/8

c)

WL/2

d)

WL/4

50.

What is the form of the moment diagram of a beam supported at both ends and carrying a uniformly distributed load?

a)

triangle

b)

hyperbola

c)

parabola

d)

rectangle