WorksheetsConstruction Tools and Techniques
Total questions: 18
Worksheet time: 9mins
The best type of punch used to mark a spot for drilling a hole is the?
center punch
flat punch
ball peen punch
chisel punch
What chisel is typically used without the use of a hammer?
Paring Chisel
Mortise Chisel
Bevel Edge Chisel
Cold Chisel
Which tool is best for moving gravel?
Round shovel
Square shovel
Garden rake
Wheelbarrow
The carpenter's square is also called a?
Framing square
Measuring tape
Level
Chalk line
The type of wrench that is most likely to fit only one size of hardware is the?
Open-end wrench
Box-end wrench
Adjustable wrench
Socket wrench
To cut through a metal pipe, the correct saw to use is a;
hacksaw
jigsaw
circular saw
band saw
Locking pliers are also commonly referred to as;
Vise-Grips
Clamp Pliers
Adjustable Wrench
Screwdriver
Folding rules with imperial markings come in?
4’ and 6’ lengths
5’ and 7’ lengths
6’ and 8’ lengths
8’ and 10’ lengths
When something is plumb, it is?
Precisely vertical
Exactly horizontal
At a 45-degree angle
Curved or bent
The try square is made at what fixed angle?
45 degrees
90 degrees
60 degrees
30 degrees
When using an adjustable wrench, pressure to tighten or loosen should always be applied to what?
The movable jaw
The fixed jaw
The handle
The pivot point
The most common type of crosshead screwdriver is the;
Flathead screwdriver
Torx screwdriver
Phillips screwdriver
Pozidriv screwdriver
A slightly rounded face on a hammer helps do what?
Avoid damage to material being nailed
Increase the weight of the hammer
Make the hammer easier to grip
Improve the accuracy of the nail placement
The type of hammer that is the best choice for pulling a nail is the?
Claw hammer
Ball peen hammer
Sledgehammer
Rip claw hammer
Pliers should not be used to;
tighten hardware (nuts, bolts, etc)
cut wires
hold small objects
twist screws
A hand screw clamp has what material as its jaws?
Metal
Plastic
Wooden
Rubber
A disadvantage of a laser measuring tool is that?
May be inaccurate in smoky conditions
Works only in bright light
Requires frequent battery changes
Is too heavy to carry easily
What tool is best for applying a specific amount of torque?
Torque wrench
Screwdriver
Pliers
Hammer
