wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

CLA Pre-Test Part 4

Total questions: 75

Worksheet time: 40mins

Name
Class
Date
1.

Which of the following types of PPE is used to protect lungs against airborne dust or particles?

a)

Hard hat

b)

Googles

c)

Earmuffs

d)

Respirator

2.

What federal agency issues standards about PPE usage?

a)

EPA

b)

DOT

c)

DOL

d)

OSHA

3.

Environmental conditions such as heat, cold, noise and lighting do NOT affect workplace safety.

a)

True

b)

False

4.

Operating checklists for equipment can be provided by the equipment's manufacturer or by an employer.

a)

True

b)

False

5.

You should hold the load close to your body when carrying a heavy load.

a)

True

b)

False

6.

In logistics, the most common PPE is?

a)

Hard hat

b)

Steel-toed Boots

c)

Gloves

d)

Mask

7.

A forklift truck equipped with pneumatic tires that allows for operation on rough areas is a(n):

a)

Carton Clamp Truck

b)

Yard Lift

c)

Order Picker

d)

Sideloader

8.

Which automated system deals with storing and retrieving loads?

a)

AS/RS

b)

AGV

c)

VRC

9.

A _________ conveyor is the most basic and least expensive type of conveyor.

a)

Gravity

b)

Powered

10.

Which type of crane is not limited to a fixed path?

a)

Overhead traveling crane

b)

VRC

c)

Gantry

11.

Which counterbalanced truck is the most common in warehouses?

a)

Sit-down

b)

Stand-up

12.

Which type of truck is wire or rail guided and uses a turret truck?

a)

Counterbalance truck

b)

Platform truck

c)

Very narrow aisle truck

d)

Narrow aisle truck

13.

Almost all warehouse stand-up equipment in used today is electric powered.

a)

True

b)

False

14.

Single and double pallet rider trucks allow the operator to ride on the truck as it moves at about 7 mph.

a)

True

b)

False

15.

Which equipment is used to move small items short distances?

a)

Hand trucks

b)

Platform trucks

c)

Pallet jacks

16.

Which equipment is used to move single pallets of products short distances?

a)

Hand trucks

b)

Platform trucks

c)

Pallet jacks

17.

Which truck is used in confined spaces for picking items that will be put on a conveyor and sent to the shipping area?

a)

Hand truck

b)

Platform truck

c)

Pallet jacks

18.

Which of the following is an example of manual material handling equipment?

a)

Hand truck

b)

Fork lift

c)

Narrow-aisle vehicle

d)

AGV

19.

Which of the following is an example of specialized material handling equipment?

a)

Hand truck

b)

Carton clamp

c)

Fork lift

d)

Pallet jack

20.

Which of the following material handling equipment lifts the operator with the load allowing the operator to pick less than full pallet loads from rack locations?

a)

Order picker

b)

Side loader

c)

Yard lift

d)

Gantry

21.

Very narrow aisle equipment is the most common type of lift truck in use today

a)

True

b)

False

22.

What is the most common type of equipment in most large distribution centers?

a)

Hand truck

b)

Fork lift

c)

Narrow-aisle vehicle

d)

Carton clamp

23.

Which of the following material handling equipment may rely on the operator to provide the force needed to lift the load or push the equipment short distances?

a)

Pallet Jack

b)

Order Picker

c)

Yard Lift

d)

Gantry

24.

What is an advantage of a gas truck over an electric truck?

a)

It is quieter

b)

It can carry a heavier load

c)

It is more environmentally friendly

25.

Which of the following material handling equipment can be a portable or stationery device that lifts a platform to the height of the trailer or railcar dock to pick up the load?

a)

Gantry

b)

Side loader

c)

Scissor lift

d)

Overhead traveling crane

26.

What item can secure the trailer to the building and uses flashing lights to indicate whether trailer is safe to enter?

a)

Wheel chock

b)

Dock beam

c)

Dok-lok

27.

Which type of fire extinguisher is used for grease fires?

a)

Class A

b)

Class B

c)

Class C

d)

Class D

28.

Slips and falls are one of the top causes of injuries in the workplace.

a)

True

b)

False

29.

Which color is most often used for safety signs, such as first-aid stations?

a)

Red

b)

Blue

c)

White

d)

Green

30.

It is the amount of the voltage, not the amount of current, which determines the danger of an electrical shock.

a)

True

b)

False

31.

Which color combination is used to indicate radiation?

a)

Black on white

b)

Magenta on yellow

c)

Black on orange

d)

Magenta on blue

32.

Which of the following federal agencies is responsible for transportation safety regulations?

a)

OSHA

b)

NIOSH

c)

USDOT

d)

EPA

33.

Exhaust fans, open windows and air conditioning systems are examples of good:

a)

Ventilation

b)

Ergonomics

c)

Lighting

d)

Safety markings

34.

It is possible for a shock of 100 volts to be more deadly than one of 10,000 volts.

a)

True

b)

False

35.

Which of the following is a detailed assessment of each step needed to identify potential threats to worker safety?

a)

Safety inspection

b)

Environmental inspection

c)

Workplace inspection

d)

Hazard Analysis

36.

The science of designing and arranging tools people use is called:

a)

Ergonomics

b)

Hazard analysis

c)

Safety inspection

d)

Corrective maintenance

37.

Which of the following describes the financial aid employers are required to provide to workers who are injured on the job?

a)

Employer Assistance Fund

b)

Workers Compensation

c)

OSHA Compliance Regulations

d)

Employee Accident Fund

38.

Red safety signs are usually used to depict:

a)

Storage locations

b)

General information

c)

Radiation warnings

d)

Danger

39.

Which of the following federal agencies regulates the labeling, packaging and safety of food products?

a)

DOT

b)

FAA

c)

OSHA

d)

FDA

40.

What type of process checks for anything that may cause air, ground, or water pollution?

a)

Environmental inspection

b)

Hazard analysis

c)

Safety inspection

d)

Workplace inspection

41.

What class of fire extinguisher is used to fight grease and oil fires?

a)

Class A

b)

Class B

c)

Class C

d)

Class K

42.

Which of the following federal agencies studies the causes of workplace injuries and illnesses?

a)

NIOSH

b)

FDA

c)

USDOT

d)

OSHA

43.

State governments may not set standards that are more rigorous than OSHA's federal standards.

a)

True

b)

False

44.

In addition to OSHA compliance, companies may use additional guidelines from other agencies to enhance their safety policies and procedures.

a)

True

b)

False

45.

What does SOP mean?

a)

Safe operating practices

b)

Standard operating plan

c)

Standard operating procedures

d)

Safe operating procedures

46.

Which of the following are benefits of C-TPAT membership? (Select ALL the correct answers)

a)

Emphasis on self-policing

b)

High inspection costs

c)

Reduced inspections

d)

No AMR required

47.

Which security initiative focuses on ports that send the highest volumes of products into the U.S.?

a)

FAST

b)

AMR

c)

CSI

d)

C-TPAT

48.

Which type of dock provides the most security from theft and weather conditions?

a)

Flush

b)

Open

c)

Enclosed

49.

Which mode of transport requires an advance manifest 4 hours before arrival?

a)

Ship

b)

Aircraft

c)

Train

d)

Truck

50.

Which mode of transport requires an advance manifest 1/2 hour before arrival?

a)

Ship

b)

Aircraft

c)

Truck

d)

FAST Truck

51.

Which mode of transport requires an advance manifest 2 hours before arrival?

a)

Ship

b)

Aircraft

c)

Train

d)

Truck

52.

Under the CSI, pre-screening of containers before they arrive at U.S. Ports must occur where?

a)

at U.S. Ports

b)

Before departing their country of origin

c)

After departing their country of origin

53.

Which mode of transportation is required to submit an Advance Manifest 24 hours before loading?

a)

Truck

b)

Air

c)

Rail

d)

Water

54.

Which government body is responsible for enforcing environmental regulations on industry?

a)

DOT

b)

EPA

c)

RSPA

d)

CBP

55.

What was the first major global supply chain security initiative?

a)

CSI

b)

FAST

c)

AMR

d)

C-TPAT

56.

Which of the following regulates industrial waste disposal?

a)

Clean Water Act

b)

ISO 14000

c)

National Environmental Policy Act

d)

Superfund

57.

In terms of facility design, throughput is:

a)

A building's capacity to store goods

b)

The ability to retrieve materials with minimum effort

c)

The volume of goods expected to move through a warehouse

d)

The speed of which goods move through a warehouse

58.

C-TPAT is a voluntary system established by which U.S. organization?

a)

Department of Labor

b)

Bureau of Customs and Border Protection

c)

Environmental Protection Agency

d)

Department of Transportation

59.

FAST is a trade initiative between which of the following countries?

a)

U.S. and Cuba

b)

Europe and U.S.

c)

Russia, China, and U.S.

d)

Canada, Mexico, and U.S.

60.

Which of the following may be elements of a security system at a distribution center?

a)

Lights

b)

Cameras

c)

High Fences

d)

All of the above

61.

FAST truck carriers must submit advance manifest info 24 hours prior to approval.

a)

True

b)

False

62.

Which of the following is NOT one of the principal security measures that helps keep supply chain facilities safe?

a)

Alarm systems

b)

Closed Circuit TVs

c)

Guard Dogs

d)

Gates

63.

A hazmat is a substance or material capable of posing an unreasonable risk to health, safety, and property when transported.

a)

True

b)

False

64.

The warehouse function that is the most critical is ______ but the main function of the shipping department is _____.

a)

Receiving, stocking

b)

Order processing, shipping

c)

Shipping, stocking

d)

Receiving, loading

65.

Goods transferred directly from the incoming vehicle to outgoing vehicle without being placed in storage is known as.

a)

Loading

b)

Cross Docking

c)

Processing

d)

Shipping

66.

What is the key function of the shipping department?

a)

Picking

b)

Packaging

c)

Loading

d)

Receiving

67.

Practice of assembling products from various locations for a specific customer order

a)

Receiving

b)

Stocking

c)

Order Processing

d)

Shipping

68.

Assigning products to the proper location within the distribution center is known as:

a)

Receiving

b)

Stocking

c)

Order Processing

d)

Shipping

69.

Who drives the supply chain logistics process?

a)

Customer

b)

Supplier

c)

Manufacturer

d)

Transporter

70.

Which term describes the time it takes to process an order from the time the order is received from the customer until the order is delivered?

a)

Transportation time

b)

Logistics time

c)

Distribution time

d)

Order cycle time

71.

Goods ready for storage and shipment are known as:

a)

Raw Materials

b)

Work-in-Process

c)

Finished goods

d)

In-transit Inventory

72.

Which type of inventory includes products that are in the process of being transported from a supplier to a customer?

a)

Work-in-process

b)

Finished goods

c)

in-transit

d)

Raw materials

73.

The supply chain life cycle begins with:

a)

manufacturers

b)

raw materials

c)

customers

d)

distribution center

74.

Which government body is responsible for enforcing environmental regulations on industry?

a)

DOT

b)

EPA

c)

RSPA

d)

CBP

75.

What role within the supply chain is responsible for physically connecting the sources of supply with customers?

a)

Distribution Centers

b)

Retailers

c)

Suppliers

d)

Transporters