Worksheetsnail technology chpt 11 :
Total questions: 37
Worksheet time: 20mins
Pet is teaching her nail technician students about different types of enhancement. She explained that very common enhancement technique that has been around for a while is_____, which is very commonly referred to by clients and marketing professional alike as.
Liquid and powder; acrylic
Liquid and powder ; dip and resin
Methacrylate;liquid and powder
Acrylic; monomer and polymer
Petra describes the various types of monomer liquid that are available to use for liquid and powder enhancements.She notes that:
While there are different types only threee are appropriate to use in most states
There are three types of liquids that the nail technician can choose to use on clients
There is only one type of liquid that is approved for use in nail salons in the United States
While there are technically three versions of liquid,only two are appropriate to use in most states
Which is NOT a reason that MMA should not be used
It does not adhere well and in order to do so, the nail technician must rough up the nail plate too much
It is extremely hard to remove from the nail
It creates a really soft and pliable enhancement and provides no protection to the natural nail
The FDA prohibits its use due to the large number of complaints it has received since the late 1970s
Petra explains to her students that getting good at liquid and powder enhancements can be :
Very lucrative due to the regular upkeep that clients are usually committed to
A good source of income if you are constantly adding new clients to your books;acrylic enhancements tend to not need much upkeep
A slow and painful process for beginners because it is so tedious and hard to get right
A waste of time because it’s an application that’s becoming less and less desired
Petra has taught her students about liquid and powder enhancements and now they are practicing their skills.As she moves around the room,observing and providing feedback ,she sees one student working with abrasives incorrectly. Which student should she interrupt and correct?
Levin who is starting with shiner to attempt to remove scratches from the nail surface and smooth the nail
Desmond,who is using a coarse-grit file to prepare for a rebalance
Alessia, who is using a shiner to finish off the nail enhancements
Malika, who is using a fine grit file to refine and finish shaping the nail
Polymer powder is made from this liquid
MMA
EMA
Oderless
Creates the hardest and most rigid nail enhancements
MMA
EMA
Odorless
Banned for use by the FDA and most states
MMA
EMA
Oderless
Has an inhibition layer when hardening
MMA
EMA
Oderless
Must be used with a dry mix ratio
Oderless
MMA
EMA
Has a slight odor
MMA
EMA
Oderless
Has a slight odor
MMA
EMA
Oderless
A dry mix ratio produced a bead that looks___on the brush; however, once press onto the nail, it will slowly form into a firm,___bead that will then be pressed as smooth with a nail brush
Dry
Glossy
Frosted
Quickly
______ is initiator added to the popular powder that starts the____process of the nail enhancement
Benzoyl peroxide
Ethyl acrylic
Catalyst
Protective overlay
Curing
Oderless liquid and powder products do not use ____, but instead of relying on monomer that have minimal order
Ethyl acrylic
Catalyst
Protective overlay
Benzoyl peroxide
As long as a product does not have an odor strong enough to be detected by all people in the salon or spa, it is named orderless, wow those were slightly detectable odor are referred to as _________
Odorless
Dry
Low odor
Catalyst
Liquid and powder product can be used as an___on the natural nails; as an ~______ of the nail tip; on an ___to create an extension; or to create nail art on the top or inside of a nail enhancement
Protective overlay
Reinforcement
Nail form
Strong
_______ are additives that speed up chemical reactions in polymers and monomers
Catalysts
Nail forms
Ethyl acrylic
Benzoyl peroxide
General speaking_____product must be used with the dry mix radio, many parts of liquid and powder
Dry
Oderless
Thick
Glossy
Because MMA products do not adhere well to the nail, technicians must___the surface of the nail for a hearing, which makes the nail play___.
Dry
Weak
Shred
Thick
In the polymerization process,____and polymer can call monomer molecules to permanent linked together into long chains
Curing
Initiators
Low odor
Adhesive
Odorless products harden more_______ than ethyl methacrylate products
Weak
Slowly
Quickly
Polymer powders are only available in three colors; white,natural,and pink
True
False
When primary drives incorrectly, it will appear to be chocolate, white color, and when a dryer properly, it will be shiny and sticky
True
False
A dry bead can be difficult to put it in place on the nail and often has air bubbles
True
False
When nail primers are used, the nail technician must be sure to use just enough on each nail, it must be sure to prevent contamination of the nail debris into the bottle between applications
True
False.
Methacrylate acid is considered the industry standard
True
False
a medium be contained two times more powder than liquid
True
False
Nail primers are available in acid free and acid base version
True
False
if too much powder is picked up, the nail enhancement repair correctly; however, it’s too much liquid is mixed, the enhancement will not cure at all
True
False
an acid free version of nail primer create a chemical bond between the nail and the enhancement
True
False
Used for initial shaping of perimeter of nails
Medium grit
Course grit
Buffer
Shiner
Fine grit
Shapes the free edge of the natural
Nail
Medium grit
Course grit
Buffer
Shiner
Fine grit
Preparers enhancement for a refill/rebalance
Medium grit
Course grit
Buffer
Shiner
Fine grit
Strong enough to thin enhancement products
Medium grit
Course grit
Buffer
Shiner
Fine grit
Usually comes in 400, 1000, and 4000
Medium grit
Course grit
Buffer
Shiner
Fine grit
After the filing is complete, start with low grade and move to high grade for desired smoothness
Medium grit
Course grit
Buffer
Shiner
Fine grit
