NEW
Font size
WorksheetsJaringan dan Routing
Total questions: 10
Worksheet time: 5mins
The device used to connect networks installed in homes, offices, internet cafes, or other institutions to connect to the internet. This hardware generally has the ability to block broadcast storms that can slow down network performance. The description refers to hardware ...
NIC
Router
Switch
LAN card
LAN tester
The network used to send back IPv4 packets. In Windows, this column contains the IPv4 address assigned as an interface, referred to as...
Static
Metric
Next-hop
Interface
Destination
The type of routing that can change according to desired conditions with certain parameters according to its protocol is the definition of...
routing mask
routing static
routing dynamic
routing tables
routing protocol
More resistant to various hacker attempts to spoof dynamic routing protocol packets with the aim of configuring routers to hijack traffic, is one of the advantages of ....
Router mask
Router tables
Router static
Router dynamic
Router protocol
Static routers are routers that can perform routing processes for a network, in the process done manually. The routing process is also called ....
Separation
Deployment
Routing
Limitation
Binding
What is the difference between static routers and dynamic routers?
Static routers determine routes while dynamic routers determine IP addresses
Static routers are more difficult in subnetting compared to dynamic routers
Static routers allocate IP addresses more easily than dynamic routers
If on static routers reset the router to default mode, then dynamic routers to factory mode
Static router configuration is done manually, while dynamic routers automatically.
A device that can function as a connector between two networks in distant places and to accommodate network load is ....
Hub
Bridge
Router
Modem
Flashdisk
Usually, routers will recommend which path to use to pass packets based on information obtained from ....
Static
Metric
Bridging
Dynamic
Routing table
In Cisco router configuration, to activate the interface, the command used is ....
shutdown
ping
enable
ip route
no shutdown
Routing is a process in a network that aims to ....
Store data on the server
Transmit data to all network devices
Determine the best path for data to its destination
Secure internet connections
Analyze data transfer speed
