Font size
Worksheetsmtcna rto yogya
Total questions: 25
Worksheet time: 25mins
Select how many different priority values are available for queues in MikroTik RouterOS:
0
16
1
8
What can be used as "Target" in the simple queue?
Server IP address
Address list name
Client IP address
Client MAC address
When sending out an ARP request, an IP host is expecting what kind of address for an answer?
IP address
VLAN ID
802.11g
MAC Address
What is the default protocol/port of (secure) winbox?
TCP/22
UDP/5678
TCP/8080
TCP/8291
A client that has successfully connected to a wireless network is considered to be which of the following? Choose all that apply:
Associated
Unassociated
Authenticated
Unauthenticated
Mark all the features that can be used for limiting client registrations to your access point:
connect-list
registration-table
access-list
wpa
To block traffic going from a laptop in internal network to the Internet through a RouterOS device, which firewall chain should be used?
output
forward
static
input
Action of type 'masquerade' in 'IP -> Firewall -> NAT' is a 'special case' of the following action:
same
netmap
src-nat
redirect
dst-nat
When setting up a server, PPP Secrets are used for:
IPsec clients
PPTP clients
L2TP clients
PPPoE clients
PPP clients
Which of the following routing status flags are possible in RouterOS:
A = Active
S = Static
C = Connected
D = Drop
What is the correct action for a NAT rule on a router that should intercept SMTP traffic and send it over to a specified mail server?
dst-nat
redirect
tarpit
passthrough
What kind of users are listed in the "/user" menu?
hotspot users
wireless users
router users
pptp users
A wireless interface 'wlan1' is added to a bridge interface 'br-lan'. To enable dhcp-server for wireless interface 'wlan1', on which interface should dhcp-server be configured?
On 'br-lan'
On both 'br-lan' and 'wlan1'
The dhcp-server cannot be enabled neither on 'wlan1', nor on 'br-lan'
On 'wlan1'
When using routing option 'check-gateway=ping' what is the ICMP echo request interval (in seconds)?
10s
20s
60s
30s
What is necessary for PPPoE client configuration?
Wireless interface configured as an access point
Interface (on which PPPoE client is going to work)
ip firewall nat masquerade rule
Static IP address on PPPoE client interface
A PC with an IP 192.168.1.2 can access the Internet, and static ARP has been set for that IP address on the ISP gateway. When the ethernet card failed, the customer replaced it with a new card and set the same IP 192.168.1.2 for it. What else should be done in order to restore the access to the Internet?
Another IP has to be added for Internet access
MAC address of the new card has to be changed to MAC address of old card on the customer's PC
Nothing - it will work as before
The static ARP entry on the ISP gateway has to be updated with the MAC address of the new ethernet card
Router has wireless and ethernet client interfaces, all client interfaces are bridged. To create a DHCP service for all clients, DHCP server must be configured on:
Every bridge port
Ethernet and wireless interfaces
DHCP service is not possible in this setup
Only on the bridge interface
For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package:
dhcp
no extra package required
routing
advanced-tools
Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33. Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. The maximum bandwidth that the client 10.10.0.33 is be able to obtain is:
4M upload/download
2M upload/download
0M upload/download
6M upload/download
MikroTik RouterOS commands can be run once a day by:
/system watchdog
/system log
/system scheduler
/system cron
Possible actions of ip firewall filter are:
accept
netmap
tarpit
tarp
log
Which port does PPTP use by default?
UDP 1721
TCP 1721
TCP 1723
UDP 1723
Mark all correct statements about command 'export file={name of the script file}':
Only part of the configuration (for example /ip firewall) can be exported
Export files can not be edited
Log entries from /log print can be exported
Full configuration of the router (without RouterOS user passwords) can be exported
/interface wireless access-list is used for:
Authenticate Hotspot users
Shows a list of Client's MAC Address that are already registered at AP
Contains the security profiles settings
Handles a list of Client's MAC Address to permit/deny connection to AP
How long is level 1 (free) license valid?
24 hours
1 year
Infinite time
1 month
