wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

A+ 1201 Quiz

Total questions: 10

Worksheet time: 5mins

Name
Class
Date
1.

A technician is investigating an issue with an all-in-one laser printer. When creating copies or scans, a vertical line appears on the output. However, printed documents and received faxes are free of this defect. To identify the source of the problem, what component should the technician inspect?

a)

The pickup rollers

b)

The corona wire

c)

The document feeder

d)

The drum assembly

2.

A desktop PC, connected to an uninterruptible power supply (UPS), consistently loses its system date and time after each power outage. What two actions should the technician take to resolve this issue?

a)

Update the BIOS.

b)

Replace the RAM modules.

c)

Disable Network Time Protocol (NTP) in the operating system.

d)

Repair the existing backup power source.

3.

A network administrator needs to ensure that a specific printer always receives the same IP address, even if the general pool of available addresses is exhausted. Which network configuration concept achieves this?

a)

VLAN

b)

Lease

c)

Reservation

d)

Exclusion

4.

A user is experiencing difficulty charging a device with a Lightning cable. The device fails to recognize the cable upon insertion, and the issue is typically resolved by reorienting the cable. This problem does not occur with other identical devices. What is the most probable cause of this issue?

a)

The device requires a restart.

b)

The battery might be expanding and needs inspection.

c)

The Lightning cable is faulty and needs replacement.

d)

The device's charging port is either obstructed or damaged.

5.

A technician observes that a laptop is experiencing unusually long startup times. What component is the most likely culprit for this issue?

a)

Hard Disk Drive (HDD)

b)

Random Access Memory (RAM)

c)

Network Interface Card (NIC)

d)

Basic Input/Output System (BIOS)

6.

A customer reports that their tablet was recently dropped, resulting in a small crack on the display's corner. Additionally, the tablet does not charge when plugged in. What should be the technician's initial course of action?

a)

Perform a hard restart.

b)

Replace the battery.

c)

Inspect the USB-C port for any damage.

d)

Run diagnostic tests on the digitizer.

7.

A technician needs to connect a Cat 6 cable to a patch panel. What is the essential tool for this task?

a)

Crimper

b)

Punchdown tool

c)

Network tap

d)

Toner probe

8.

Which type of DNS record is primarily used to specify the mail server responsible for a domain's email?

a)

SRV

b)

CNAME

c)

SOA

d)

MX

9.

Among the following cable types, which one is capable of transmitting both data and video signals?

a)

VGA

b)

HDMI

c)

USB-C

d)

DisplayPort

10.

Which device's main function is to inspect and control network traffic for security purposes?

a)

Switch

b)

Firewall

c)

Hub

d)

Access Point