WorksheetsInto To Connectivity
Total questions: 10
Worksheet time: 8mins
PC 1 IP : 192.168.1.2/25
PC2 IP : 192.168.2.2/25
If PC1 is connected to PC2 with a point-to-point connection,
will they be able to communicate?
Yes
No
Only if they are in the same VLAN
It depends on the cable type
What is the network topology that provides the best redundancy?
Full Mesh
Star
Bus
Ring
Which layers does the Hub & the Bridge operate in respectively?
Layer 1 & Layer 2
Both operate in Layer 2
Layer 2 & Layer 3
Layer 2 & Layer 1
What happens if PC1 (192.168.1.1/24) in Vlan1 pings PC2 (192.168.1.2/24) in Vlan1?
PC1 will forward the packet to the default gateway, and the gateway forwards it to PC2
PC1 won't be able to ping PC2 as they are in the same VLAN
PC1 will forward the packet directly to PC2 and the ping is successful
None of the previous
The PDU in layer 4 is called a (a)
Draw a ring topology
What happens when a device in VLAN 10 sends a broadcast frame.
It is sent to all devices in the network
It is sent to the default gateway
It is sent to all devices that belong to VLAN 10
It is sent to all devices except the devices in VLAN 10
To perform Inter-VLAN routing we would need a
Router
Switch
Bridge
Hub
From the pros of configuring VLANs
Separating the network on a L3 level
Achieving a single broadcast domain in the entire network
Reducing the number of devices in the network
Enhances the network security
What is a default gateway?
The device in which traffic destined outside the network is forwarded to
The device that provides the IP addresses to the end hosts
A layer 1 device that is used to repeat the received signal
None of the previous
