If something breaks, let the instructor know and try to find any ________ pieces.

Always wear ________ glasses when eye hazards exist.

No ___________ allowed in the machine room (like sandals, slides, etc).

All ________ must be in place and always used.

Make all possible adjustments to the machine with the ________ off

Disconnect machine from power source when making ________.

Do not leave the machine until it comes to a ________ stop.

No one is allowed to operate machinery without a certified teaching professional there and with his/her permission.

Always adjust the upper guide assembly as close to work as possible. (____ inch)

Always make ________ cuts before cutting long curves.

Always stop the machine before removing the ________ pieces from the table.

Never saw stock, which does not have a flat ________ for support.

Never attempt to cut a smaller ________ than the blade will accept.

Always make sure the blade, tracking, and tensions are properly ________.

Always adjust the table or depth stop to avoid drilling into the ________.

Always make sure drill bit or other cutting tool is secured to the ________.

Drill Press: 3. Never drill material that is not ________.

Drill Press: 4. Never operate the machine without a full ________ in place.

Drill Press: 5. Turn the machine off before cleaning the ________.

Inspect the sanding ______/pad for cracks or damage before use.

Orbital Sander Safety Tips: Always ensure the ______ is removed before changing paper or adjusting.

Orbital Sander Safety Tips: Fill in the blank. Keep the sander ______ to prevent gouging the workpiece.

Hand Router Safety Tips: Fill in the blank. Make sure the router bit is securely tightened in the ______ before use.

Hand Router Safety Tips: Fill in the blank. Keep the router base flat and don't ______ it when routing.

Hand Router Safety Tips: Fill in the blank. Use ______ or a router table when possible for added stability.

Hand Router Safety Tips: Fill in the blank. Go slowly and make multiple ______ passes instead of trying to remove too much material at once.

Hand Router Safety Tips: Fill in the blank. Keep your hands positioned properly with a firm grip on both ______.

Hot Glue Gun: Fill in the blank. Never touch the metal tip or melted glue - they can cause severe ______.

Hot Glue Gun: Fill in the blank. Unplug the glue gun when you're finished and allow it to ______ completely before storing.

Fill in the blank. Use only the type of glue sticks recommended for your particular glue gun. Green = big glue stick. Yellow = ______ glue stick.