NEW
Font size
WorksheetsSafety Study Guide Rev 8/21/2018
Total questions: 55
Worksheet time: 18mins
What is the definition of SAFETY?
Condition of being safe, freedom from danger.
Unintentional event that causes injury or property damage.
Given the victim of an accident until the doctor arrives.
Occupational Safety and Health Administration.
What does OSHA stand for and what is its purpose?
Occupational Safety and Health Administration. Designed to insure safe and sanitary working conditions.
Office of Safety and Health Association. Responsible for workplace insurance.
Organization for Sanitary Health Advancement. Focused on employee benefits.
Occupational Standards and Health Agency. Oversees workplace training.
Which color is used for Fire Protection in the safety color code?
Red
Yellow
Orange
Green
Which of the following is a personal safety rule?
Confine long hair around moving equipment
No horseplay
Store oily rags in metal containers
Use compressed air for its intended purpose
Fill in the blank: You should _______ to prevent diseases in the shop.
Wash hands frequently
Leave food uncovered
Ignore spills
Share personal items
What should you do if you find defective tools in the shop?
Report all defective tools to the instructor
Ignore the defective tools and continue working
Try to fix the tools yourself without telling anyone
Lend the defective tools to a friend
Which of the following is NOT a general shop rule?
Report all accidents to the instructor immediately
Operate hazardous machines without instructions
Keep the shop and floor clean and clear at all times
Store oily rags in metal containers
What should you do before performing maintenance on power equipment?
Disconnect the power from equipment before performing maintenance
Wear sandals while working
Increase the power supply
Ignore safety procedures
What is the proper way to walk in the shop?
Walk (Don't Run)
Run quickly
Skip around
Crawl on the floor
Jump from table to table
What should you do with oily rags in the shop?
Store oily rags in metal containers
Leave them on the workbench
Throw them in the regular trash can
Hang them to dry on a wooden rack
What is one safety rule involving hand tools?
Use the proper tool for the job
Use any tool available, regardless of its condition
Carry tools in your pockets
Ignore damaged tools
What should you do after finishing working with a tool?
Clean and return when finished working
Leave it where you last used it
Give it to someone else without cleaning
Throw it away if you don't need it
How should you use a tool?
Use properly
Use carelessly
Ignore instructions
Break it intentionally
Use without knowledge
When should you use a cold chisel?
Use only if sharp without mushroomed ends
Use when it is rusty
Use when it is bent
Use when it is dull
What safety equipment should you use when working with a cold chisel?
Use a full face shield
Wear sandals
Use bare hands
Wear sunglasses
How should you hold a cold chisel when striking?
Hold firmly against work when striking
Hold loosely and away from the work
Grip with both hands and swing the chisel
Rest the chisel on your foot while striking
What should you consider when selecting a cold chisel for a job?
Select correct size and shape for job
Choose the chisel based on its color
Pick the chisel with the highest price
Select the chisel with the longest handle
What is the only use for a screwdriver?
Use only for turning screws, nothing else
Use for opening paint cans
Use for prying open boxes
Use for stirring paint
What should you consider when choosing a screwdriver?
Use the right size and shape for the job
Choose the most colorful screwdriver
Pick the heaviest screwdriver available
Select any screwdriver regardless of the screw type
Why should you not hold work in one hand and a screwdriver in the other?
Can slip and cut hands
It makes the screwdriver heavier
It increases the speed of work
It improves accuracy
When should you use a screwdriver?
Use only if in good condition
Use even if the handle is broken
Use if the tip is worn out
Use if it is rusty
What should you not use pliers for?
Do not use to loosen or tighten anything
Do not use to cut wires
Do not use to hold objects
Do not use to bend metal
What should you do before cutting a taut wire with pliers?
Secure on both sides of intended cut to prevent dangerous recoil when severed
Wear gloves to avoid fingerprints on the wire
Cut as quickly as possible to minimize effort
Hold the wire with bare hands for better grip
What safety equipment should you wear when hammering?
Wear a full face shield when hammering
Wear sandals when hammering
Wear a woolen cap when hammering
Wear sunglasses when hammering
What should you check before using a hammer?
Be sure the hammer is in good condition
Make sure the hammer is painted red
Check if the hammer is made of plastic
Ensure the hammer is stored in a toolbox
How can you prevent a hammer from slipping from your hand?
Keep handle clean to prevent slipping from your hand
Wear slippery gloves while using the hammer
Apply oil to the handle for smoothness
Hold the hammer loosely while working
What should you consider when selecting a vise for a job?
Make sure it is heavy enough for the job
Choose the one with the brightest color
Pick the smallest vise available
Select the one with the most handles
What should you do after using a vise?
Close and turn handle down when finished
Leave the vise open and walk away
Tighten the vise as much as possible
Remove the handle from the vise
What should you use when working with round items in a vise?
Use the vise inserts or 'V' blocks
Use a hammer to secure them
Place them directly without support
Wrap them in cloth only
What should you do before loosening a vise?
Hold objects firmly before loosening vise to keep it from falling on you
Spray oil on the vise handle
Tap the vise with a hammer
Wear rubber gloves
When should you operate an engine under close supervision?
Only if there is an exhaust gas removing system connected to exhaust
Whenever the engine is cold
Only during routine maintenance
When the fuel tank is full
What should you do when working around hot engines?
Use caution when working around hot engines
Wear sandals while working around hot engines
Ignore safety warnings around hot engines
Touch the engine to check if it's hot
What should you not do when starting an engine?
Do not pour gasoline into the carburetor when starting
Check the oil level before starting
Ensure the gear is in neutral
Turn on the ignition switch
What should you check before starting a vehicle engine?
Make sure it is in PARK (automatic transmission) or NEUTRAL (standard transmission), Park brake set and wheels chocked
Check if the headlights are turned on
Ensure the air conditioning is running
Verify the radio is off
Why should you keep sparks and flames away from a battery?
It may explode
It may stop working
It may lose charge
It may get cold
What should you do when replacing a battery?
Remove ground cable first and install last when replacing battery
Remove positive cable first and install last when replacing battery
Remove both cables at the same time
Leave all cables connected during replacement
What should you do before removing battery leads?
Make sure charger is off before removing leads
Check the battery fluid level
Disconnect the alternator first
Turn on the ignition switch
Why should you not lay tools on top of a battery?
May cause spark
It will drain the battery faster
It will make the battery heavier
It will improve battery performance
How should you move a battery?
Use battery strap or carrier to move battery
Roll the battery on its side
Drag the battery by its terminals
Lift the battery with bare hands
Which of the following is NOT a proper way to store gasoline?
Store in approved safety containers
Do not operate engine if there is a fuel leak
Do not use gas to clean parts
Only bring enough gas in shop for immediate use
What should you do if your clothes become soaked with oil or gas?
Change oil/gas soaked clothes immediately
Let the clothes dry naturally before wearing again
Wipe off the oil/gas and continue wearing
Spray perfume to mask the smell
What should you learn the location and use of, according to the safety rules?
All fire extinguishers
All windows
All desks
All computers
When using a bench grinder, what type of shield should you use?
A full face shield
Safety goggles only
No shield is necessary
A welding helmet
Which of the following is NOT an equipment safety rule for a bench grinder?
Use a full face shield
Keep tool rest in place and properly adjusted
Do not overload motor
Use suitable hand protection
Use gasoline to clean parts
When using lifting devices, what should you always use when working under a vehicle on a jack?
Jackstands
Wheel chocks
Ramps
Blocks of wood
What should you do before raising or lowering a vehicle with a lifting device?
Make sure everything is clear
Check the tire pressure
Turn on the headlights
Release the parking brake
What should you do before plugging in drills and grinders?
Make sure switches are in the OFF position
Check if the cord is tangled
Plug in while the switch is ON
Use without checking the power source
Which of the following is NOT a component of the fire triangle?
A. Fuel
B. Heat
C. Oxygen
D. Water
Class B fires occur in which type of material?
Wood, paper, cloth
Flammable liquids such as gas and oil or paint thinners
Electrical equipment
Combustible metals (iron and magnesium)
Which class of fire occurs in electrical equipment?
Class C
Class A
Class B
Class D
What type of fire extinguisher should be used on Class A fires?
Pressurized Water
Carbon Dioxide
Dry Chemical
Foam
Foam extinguishers are used on ______ fires.
Class A
Class B
Class C
Class D
Carbon Dioxide (CO2) extinguishers are used on ______ and ______ fires.
Class B, Class C
Class A, Class D
Class A, Class B
Class D, Class C
Dry Chemical extinguishers are used on ______, ______, and ______ fires. (Fill in the blanks)
Class A, Class B, Class C
Class B, Class C, Class D
Class A, Class D, Class K
Class C, Class D, Class K
Dry Powder extinguishers are used on ______ fires.
Class D
Class A
Class B
Class C
