WorksheetsPlaner Safety Test
Total questions: 18
Worksheet time: 9mins
Name
Class
Date
1.
1. Get ___________from the instructor before you use the planer.
a)
Keys
b)
Blades
c)
Permission
d)
Material
2.
2. Wear eye and ear _________ when using the planer
a)
Tables
b)
Protection
c)
Permission
d)
Material
3.
3. You should know where the __________ are, and know how to operate them in case there is an emergency.
a)
Brooms
b)
Drill bits
c)
Fire extinguishers
d)
Controls
4.
4. The planer should be set for the _________ cut that will do the job.
a)
Largest
b)
Smallest
c)
Deepest
d)
Furthest
5.
5. The wood must be in good condition and free of ___________ such as loose knots, splits or checks.
a)
Glue
b)
Defects
c)
Colors
d)
None of the above
6.
6. The wood must be free of nails or any other ________
a)
Glue
b)
Defects
c)
Hardware
d)
Bark
7.
7. Never plane wood that has paint, varnish or any other kind of _______ on it
a)
Finish
b)
Materiels
c)
Wood
d)
None of the above
8.
8. The stock must be _________ enough to go through the planer safely
a)
Short
b)
Thick
c)
Thin
d)
Long
9.
9. The stock must be at least _________ inches long to be planed safely.
a)
15
b)
12
c)
14
d)
16
10.
10. When you plane a long piece of stock, get someone to help support the material as it leaves the _________ side of the planer.
a)
Infeed
b)
Outfeed
c)
Face down
d)
Face up
11.
11. Always plane __________ the grain of the wood. Never try to plane across the grain.
a)
Across
b)
Against
c)
With
d)
None of the above
12.
12. Keep your fingers out of the area between the board and the ___________
a)
Top of the planer
b)
Table
c)
Side of the planer
d)
All of the above
13.
13. Stand to one side while the board is going through the planer. This is to avoid injury in case there is a ___________
a)
Good song that comes on
b)
Kick back
c)
Flying wood chip
d)
Flying nail
14.
14. _______________ look into the planer while it is operating.
a)
Only when you have safety glasses on
b)
Sometimes
c)
Never
d)
Always
15.
15. Do not use the planer until you have learned to operate it ________
a)
quickly
b)
slowly
c)
quietly
d)
Correctly and safely
16.
16. What is the smallest cut that will do the job ________
a)
0.75
b)
0.0625
c)
0.625
d)
0.075
17.
17. Where should your hands stop and not go past ________
a)
The opening of the planer
b)
The board
c)
The table
d)
None of the above
18.
Where should you never put your fingers and hands when operating the planer?
a)
Between the top of the planer and the wood
b)
Between the sides of the planer and the wood
c)
Between the bottom of the wood and the table
d)
All of the above
100 %
