WorksheetsHEALTH AND SAFETY IN THE ENGINEERING WORKPLACE QUIZ
Total questions: 24
Worksheet time: 12mins
What is the primary purpose of the Health and Safety at Work etc. Act 1974?
To ensure that employers receive financial compensation for workplace accidents.
To make sure engineering firms are profitable.
To place a legal duty on employers and employees to ensure a safe working environment.
To provide a guide for what to do in case of a fire.
Imagine you've just started a new placement. What is one of the first things your employer is legally required to provide you with regarding health and safety?
A list of all other employees.
A comprehensive induction and training on workplace risks and procedures.
A free lunch every day.
A company car.
As a new employee, what is your legal duty in a manufacturing workplace when it comes to health and safety?
To only report major accidents.
To use personal protective equipment (PPE) only when it's convenient.
To take reasonable care for your own health and safety and that of others who may be affected by your actions.
To ignore any safety warnings if you are in a hurry.
What does PPE stand for and when is it most effective?
Personal Professional Excellence; when you are doing your best work.
Personal Protective Equipment; when it is used correctly and is suitable for the task.
Prioritised Prevention of Explosions; in high-risk areas.
Professional Prevention of Emergencies; during a drill.
You notice an electrical cable is frayed and exposed. What is your immediate course of action?
Attempt to fix the cable yourself with some electrical tape.
Ignore it, as long as the machine is still working.
Isolate the power and report the fault to a supervisor immediately.
Cover the frayed part with a box to hide it from others.
The Control of Substances Hazardous to Health (COSHH) regulations are a key part of workplace safety. What is their main goal?
To control how many hazardous substances a company can buy.
To prevent or reduce workers' exposure to hazardous substances.
To ensure that all substances used are harmless.
To teach employees how to mix hazardous chemicals.
What is the purpose of a Safety Data Sheet (SDS) for a chemical you might use in an engineering workshop?
To provide a list of other chemicals it can be mixed with.
To detail the financial cost of the chemical.
To provide information on the chemical's properties, hazards, and safe handling procedures.
To list the main ingredients of the chemical.
In the context of risk assessment, what does the term 'hazard' mean?
The likelihood of someone being harmed.
The potential for something to cause harm.
The number of people who have been injured.
A formal written document.
What is the key purpose of a risk assessment in a manufacturing environment?
To find a person to blame for an accident.
To identify potential hazards and decide what measures are needed to control the risks.
To write down a list of all tools in the workshop.
To train new employees on how to use machinery.
Why is it important to report 'near misses' in the workplace?
Because they don't count as an accident.
Because they are a sign that something is wrong and could lead to a serious accident in the future.
To get a bonus for being observant.
To have a story to tell your colleagues later.
What is the purpose of an emergency stop button on a machine?
To pause the machine's operation for a short break.
To turn the machine off at the end of the working day.
To immediately and safely halt the machine in case of a dangerous situation.
To reverse the direction of the machine's operation.
What is the purpose of 'lockout/tagout' procedures in a workshop?
To prevent unauthorised people from using a machine.
To ensure machinery is switched off and cannot be accidentally restarted during maintenance or repair.
To track the number of times a machine has been used.
To lock the workshop at the end of the day.
What is the correct procedure for handling a small spill of a hazardous chemical in the workplace?
Try to clean it up with a paper towel and put it in the regular bin.
Leave it and hope someone else finds it.
Refer to the Safety Data Sheet (SDS) for the correct cleanup procedure and use the appropriate spill kit.
Cover it with sawdust to absorb it.
What is the main reason for keeping gangways and fire exits clear in a manufacturing environment?
To make the workshop look neat and tidy.
To ensure there is a clear path for quick and safe evacuation in an emergency.
To create a space for storing extra materials.
To have an open area for a break.
You see a fire and an alarm has been sounded. What should you do next?
Try to extinguish the fire yourself, no matter the size.
Run as fast as you can to the nearest exit.
Evacuate the building calmly using the nearest fire exit and proceed to the designated assembly point.
Call your supervisor before you leave the building.
Why is it important to report even minor injuries, like a small cut, in the workplace?
To get a day off work.
To ensure the incident is logged and investigated to prevent it from happening again.
So the company can sue the person who caused it.
To make sure a doctor's note is filed.
What is the purpose of a health and safety committee in a large engineering company?
To organise social events for employees.
To represent the workforce's concerns and contribute to decision-making on health and safety issues.
To punish employees who break safety rules.
To audit the company's financial records.
Why is good housekeeping, such as keeping floors clear of clutter and spills, so important in a manufacturing plant?
It helps the cleaners do their job faster.
It looks better to visitors and potential clients.
It prevents slips, trips, and falls, which are a major cause of workplace injuries.
What should you do if you are asked to perform a task that you have not been trained for and you think is unsafe?
Attempt it anyway, as refusing might get you into trouble.
Refuse to do the task and walk away without an explanation.
Politely decline and explain that you have not received the necessary training, then ask for a supervisor to discuss it.
Find a colleague who has done it before and ask them to show you, without telling a supervisor.
Why is it a legal requirement for most businesses to display a health and safety poster or a leaflet?
To show visitors that the company cares about safety.
To inform employees of their rights and duties under health and safety law.
To advertise the company's commitment to a safe working environment.
To provide a list of local emergency services.
What is the key role of the Health and Safety Executive (HSE)?
To provide first aid services to all businesses.
To enforce health and safety law and investigate serious workplace accidents.
To sell health and safety equipment to businesses.
To offer advice to new employees on what career path to take.
The 'Hierarchy of Control' in health and safety refers to:
a system for ranking and implementing measures to control risks
a list of job titles in a company
a method for organizing safety meetings
a chart showing company profits
Why are toolboxes and benches required to be kept tidy and organised in a workshop?
So that they can be easily cleaned at the end of the day.
To prevent items from falling and causing a trip hazard or injury.
To show the supervisor that you are a tidy person.
To keep all your tools in the same place to save money.
What should you do if you see a faulty piece of equipment that is clearly labelled 'Do not use'?
Use it, as the label is probably out of date.
Take the label off and use the equipment anyway, as you need it to finish a job.
Report the location of the equipment to your supervisor and ensure it is not used by anyone else.
Move it to a different location where it won't be in the way.
