WorksheetsElectrical Technology Safety Test
Total questions: 20
Worksheet time: 20mins
While using a ladder how many points of contact should be maintained while climbing up or down?
2
3
4
Any of the above
What is the process we use to make it safe to work on something that has a power source?
LAT (Lock and Tag)
TOAT (Turn Off and Tag)
LOTO (Lock-Out-Tag-Out)
None of the above
In the case of an emergency involving electricity what should we do?
Turn off the Lights.
Push the Red Emergency Shut Down Buttons located around the room.
Run around screaming and waving your hands.
Walk away and do nothing.
What is a hazard while using your Lineman Pliers?
Pinching hazard
Burn hazard
Chemical hazard
Fall hazard
While working in the lab what PPE must be worn?
Hi-viz Vest
Safety Glasses
Hard Hat
Safety toe Boots
Work shirt
After work is done what must you do?
Sit down and relax.
Clean up your work area.
Go home.
None of the above.
What is the correct order of our Lock-Out-Tag-Out policy?
Identify all energy sources
Turn off the circuit at its closest disconnect.
Lock and Tag the disconnect with your name, task being preformed, Location of task, and Date
Test the circuit to verify that the circuit is dead. (Live-Dead-Live)
Preform the work on the circuit.
What in the room would you use to help get a foreign object out of your eye?
Sink
Needle nose pliers
Eye wash station
First Aid kit
When we travel to various facilities and locations for tours and to work, what PPE policy will we follow?
None
Our own policy
The locations policy
Whatever we want to do
What tool that we use in the lab that poses a cut hazard?
Phillips Screw Driver
Needle Nose Pliers
Utility Knife
Lineman Pliers
Before starting a lab or project what will your crew fill out?
Leave of absence form.
Job Safety Analysis (JSA)
Career Hazard Report (CHR)
Safety Data Sheet (SDS)
Which of these is not an appropriate PPE for electrical power industry?
Flame-resistant clothing
Safety glasses
Hard hats
None of the above
High pollution can cause cracking and damage integrity of rubber insulating gloves.
True
False
Flame-resistant clothing can be washed with other laundry.
True
False
Why are rubber insulating gloves filled with air?
To conduct air-test
To make them lighter
To see how well they expand
None of the above
Only (a) worker can repair exposed electrical equipment.
insulated
protected by PPE
unqualified
Barriers and insulating covers can protect against_______?
Electrocution hazard
Effect of arc flash or arc blast
Both a and b
None of the above
How should you pick up an item to reduce the risk of back injury?
With one hand.
Bending at the knees with back straight.
With straight, locked knees and bending at the waist.
Any of the above.
When carrying an item you should always step over obstacles in your path.
True
False
If injured while working, even when the injury is minor, you should never alert your supervisor to report the injury.
True
False
