NEW
Font size
WorksheetsAcoustics in Buildings Quiz
Total questions: 50
Worksheet time: 25mins
Which of the following describes the science of sound in buildings?
lighting
acoustics
ventilation
resonance
The unit of sound intensity is:
lumen
decibel (dB)
candela
watt
The time required for sound to decay 60 dB after the source has stopped is called:
reflection time
absorption rate
reverberation time
resonance period
In auditoriums, excessive reverberation causes:
better clarity
poor speech intelligibility
improved acoustics
higher sound absorption
Which building material has the highest sound absorption coefficient?
glass
concrete
mineral wool
marble
The optimum reverberation time for a classroom is around:
0.2-0.4 seconds
0.6-0.8 seconds
1.5-2.0 seconds
3.0 seconds
Sound transmission through walls is measured by:
lux level
sound transmission class (STC)
noise reduction coefficient (NRC)
resonance index
Which frequency range is most important for speech intelligibility?
20-50 Hz
500-4000 Hz
8000-12000 Hz
15000-20000 Hz
Which shape is most prone to focusing sound reflections?
rectangular
concave
convex
triangular
The echo effect occurs when reflected sound reaches the listener after:
0.01 seconds
0.05 seconds
0.1 seconds or more
1 second
A measure of a surface's ability to absorb sound is called:
transmittance
absorption coefficient
reverberation index
resonance factor
For concert halls, the recommended reverberation time is:
0.2-0.4 seconds
0.5-0.8 seconds
1.0-1.2 seconds
1.8-2.0 seconds
Which material combination provides better sound insulation in partitions?
single concrete wall
hollow wood panel
double wall with air gap
thin metal sheet
Noise criteria (NC) curves are used to:
measure light levels
evaluate background noise in rooms
calculate reverberation time
design ventilation systems
Flutter echo is caused by:
sound transmission through a wall
repeated reflections between parallel surfaces
vibration of building elements
high-frequency noise only
In open-plan offices, acoustical privacy is best achieved through:
bare concrete floors
sound-absorbing ceilings and partitions
reflective glass panels
increasing room volume
Which is the most effective location for acoustical panels in a lecture hall?
floor surface
rear wall and ceiling
side of podium
entrance door
Transmission of impact noise through floors is reduced by:
smooth tiles
resilient floor coverings
hard granite
metal plates
The phenomenon where low-frequency sound bends around obstacles is called:
absorption
diffraction
reflection
reverberation
In architectural acoustics, NRC (Noise Reduction Coefficient) indicates:
strength of walls
reverberation time
average absorption of a material
intensity of external noise
Which type of sound insulation is most important in multi-family housing?
reverberation control
sound diffusion
airborne and impact noise reduction
echo elimination
A good material for reducing high-frequency noise is:
thick concrete wall
acoustic foam
glass window
steel plate
Which factor increases sound absorption in a room?
smooth hard finishes
high ceiling height
soft porous surfaces
parallel reflective walls
The undesirable concentration of sound at a point in a hall due to curved surfaces is called:
flutter echo
sound focusing
diffraction
masking
The main goal of acoustical design in hospitals is:
increase reverberation
enhance speech intelligibility
create concert-hall quality
control noise for patient comfort
Which property of acoustical material is most desirable for auditoriums?
high reflectivity
high resonance
high sound absorption
high stiffness
What is the effect of increasing the thickness of a porous absorber?
increases reflection
improves low-frequency absorption
reduces absorption
creates flutter echo
Which acoustical treatment is commonly used on ceilings to control reverberation?
terrazzo finish
gypsum plaster
acoustic ceiling panels
glass tiles
Which type of wall construction best prevents sound leakage?
single brick wall
wood paneling
staggered stud wall with insulation
lightweight partition
Which material is both fire-resistant and good at sound absorption?
plastic sheet
mineral wool
wood panel
carpet
Sound diffusers are preferable in:
classrooms
concert halls
hospital rooms
libraries
The main function of acoustical baffles hanging from ceilings is:
reflect sound
block noise
absorb sound and reduce reverberation
transmit sound
In theaters, wall panels are often tilted or curved to:
block light
scatter and diffuse sound
reduce structural load
save material
Which finish would make an acoustical absorber ineffective?
fabric cover
smooth reflective coating
perforation
porous texture
The term "acoustical treatment" in buildings generally refers to:
paint finish on walls
lighting adjustment
use of materials to control sound behavior
adding HVAC ducts
Which material is most effective for controlling sound within HVAC ducts?
steel lining
fiberglass lining
plastic coating
concrete lining
What type of ceiling tile has the best acoustic performance?
metal sheet
fibrous or perforated acoustic tile
glazed ceramic
polished stone
Which acoustic property does cork primarily provide?
diffusion
reflection
absorption
resonance
The best acoustical treatment for a gymnasium with high ceilings is:
concrete cladding
suspended acoustic panels or baffles
marble wall finish
glass block walls
Which property of acoustical material reduces echo in small rooms?
rigidity
porosity
density
stiffness
Which acoustical material is lightweight, flexible, and often used in wall panels?
concrete
terrazzo
fabric-covered fiberglass
granite
What happens if sound-absorbing panels are painted over multiple times?
better absorption
increased NRC
reduced absorption
no change
Which acoustical solution is effective against both airborne and impact noise?
heavy wall
carpet
floating floor system
glass window
The main limitation of fabric wall panels as an acoustical material is:
difficult installation
limited low-frequency absorption
poor fire resistance
excessive weight
Which material has the lowest sound absorption capacity?
acoustic plaster
perforated gypsum
carpet
polished marble
The absorption of mid-frequency sound is most efficiently achieved by:
thin curtains
concrete
mineral wool panels
metal sheet
A common acoustical solution in office cubicles is:
gypsum partitions
fabric-covered partitions with absorptive cores
glass dividers
polished wooden screens
What is the role of perforations in acoustic boards?
decoration only
allow sound waves to pass into absorbing backing
increase reflection
improve structural strength
The absorption of very low-frequency sounds requires:
thin fabrics
porous plaster
bass traps or resonant absorbers
acoustic ceiling tiles
Which acoustical material is considered sustainable and eco-friendly?
plastic foam
vinyl sheet
recycled cellulose fiber panels
aluminum cladding
