WorksheetsSSC Topic C388
Total questions: 10
Worksheet time: 5mins
What is the most frequent cause of fatal or serious boom forklift accidents?
Tip-overs
Being crushed between the forklift and a surface
Being struck by the forklift
Running the machine off an edge
Which of the following is NOT a safe practice when operating a telescopic handler?
Performing maintenance with the engine running
Checking tire pressures at the start of each shift
Using outriggers when elevating loads on uneven surfaces
Locking the boom swing before moving the machine on public roadways
What should be done before starting the machine to ensure safety?
Ensure all hydraulic controls are in the neutral position
Check the load limit indicator
Perform an inspection of the vehicle's brakes
Use a signaler to direct movement
Which of the following is a requirement for using a telescoping handler to lift co-workers?
Workers must be able to shut-off power to the machine
The machine must be operated on a flat surface
The boom must be fully extended
The machine must be in motion
What should be regularly inspected to avoid unsafe conditions when operating a telescopic handler?
Brakes, lights, and warning devices
Damage, defects, and unsafe conditions
Hydraulic controls and tire pressures
Load limit indicators and outriggers
Why should a telescopic handler never be operated in areas without sufficient ventilation?
A buildup of carbon monoxide could occur
The machine could overheat
Visibility could be restricted
The machine could tip over
What is the purpose of using a signaler when operating a telescopic handler?
To direct movement in areas where visibility is restricted
To check tire pressures
To perform maintenance
To lock the boom swing
Which of the following is a recommended practice when elevating loads on an uneven surface?
Use outriggers
Lower all attachments
Check tire pressures
Lock the boom swing
What should be done at the beginning of each shift to ensure the forklift will be stable under load?
Check tire pressures
Perform maintenance
Use a signaler
Lock the boom swing
What should be done before leaving the machine unattended?
Set the parking brake and lower all attachments
Perform an inspection of the vehicle's brakes
Check tire pressures
Use a signaler to direct movement
