WorksheetsBasic Safety Module Quiz
Total questions: 14
Worksheet time: 10mins
Why is it important to inspect PPE items such as fall arrest harnesses, lanyards, and connecting devices before use?
To ensure they are clean
To determine if they are safe to use
To check if they are the correct size
To confirm they are the latest model
What are scaffolds primarily used for?
To store construction materials
To provide elevated platforms for workers and materials
To create trenches for excavation
To measure the height of a building
What does the term "excavations" refer to?
Elevated platforms for workers
Any man-made cuts, cavities, trenches, or depressions in an earth surface
A rule for fall protection
Short sections of rope or strap
Why is it important to keep walking and working surfaces clear of clutter and debris?
How should cables, extension cords, and hoses be managed in walking and working areas?
Leave them on the ground where they are easily accessible.
Run them overhead or through crossover plates to avoid tripping hazards.
Wrap them around furniture for convenience.
Place them in random locations for easy access.
What is a safety rule regarding elevated work areas such as scaffolds, work platforms, and roofs?
Running is allowed if you are in a hurry.
Do not run on scaffolds, work platforms, decking, roofs, or other elevated work areas.
Always carry heavy equipment while running.
Elevated areas are safe for running if they are clean.
What is the minimum strength requirement for hole covers?
They must support twice the weight of anything that may be placed on top of them.
They must support the exact weight of anything placed on them.
They must support half the weight of anything placed on them.
They do not have a specific strength requirement.
Anchor points must be rated at twice the intended load. What does this ensure?
Increased flexibility of the anchor point
Enhanced safety and reliability
Reduced cost of materials
Easier installation process
What is the purpose of the body harness in a personal fall arrest system?
To provide comfort during work
To distribute the force of a fall across the body
To reduce the weight of the equipment
To increase the worker's mobility
What is the primary use of non-shock absorbing lanyards?
For positioning and fall restraint
For absorbing shock during a fall
For climbing steep surfaces
For attaching tools to a harness
What is the purpose of a vertical lifeline in safety equipment?
To provide horizontal movement for workers
To suspend workers from a fixed anchorage
To replace fall arrest devices
To act as a substitute for safety harnesses
Which of the following is an example of a ladder suitable for use around electrical installations?
Aluminum Stepladder
Fiberglass Stepladder
Straight Ladder
Rolling Warehouse Ladder
What is the minimum overlap required for an extension ladder up to 36 feet in length?
2 feet
3 feet
4 feet
5 feet
What should be done if the rope used to raise and lower the movable section of an extension ladder is frayed or has worn spots?
The rope should be tied in a knot to secure it.
The rope should be replaced before the ladder is used.
The rope should be inspected after using the ladder.
The rope should be cleaned and reused.
