Font size
WorksheetsMs. Dimesa Classroom Safety
Total questions: 32
Worksheet time: 35mins
When handing tools to other people you should
Hand them the tool handle first
Throw it carefully to the other person
Slide it along a bench or floor
Hand them the tool cutting edge first
Tools that are sticking over the edge of tables or work benches are:
Safe when the teacher is in the shop
Safe when you have warned others to watch out
Safe when you are the only person in the shop
Never safe under any conditions
When tools are carried in your hands, keep the cutting edge or sharp point directed:
Toward the floor
Away from the body
Over your head
Toward your body to protect others
You are responsible for your actions while in the Shop.
True
False
Use only the type of tools that are _____________ for the work you are doing.
clean
battery powered
designed
cleared
Be sure the tool handle is fitted ______________ and secure.
Don't use a tool that is dull, broken, or _____________.
balanced
old
defective
___________ aim a cutting toward yourself or toward anyone else.
Keep work and walking areas free of clutter to eliminate tripping hazards before accidents occur.
Which one does NOT belong when it come to proper housekeeping in the workplace?
Store tools away from walkways.
Put away tools and equipment when not in use.
Let debris pile up until someone else takes care of it.
Keep aisles, stairways, and doorways unobstructed.
When it comes to utility knives, which one is NOT true?
If needed, repeat along your cutting line until the material separates.
If the blade is tearing instead of cutting, it is likely too dull and should be replaced.
It is okay to use a lot of force on the blade when cutting.
Make sure to not cut towards your body.
When should you take the glue out of the glue gun
When you are done
When the glue gun is cooled down
Never
When Mr. Mau tells you to
(a) leave the glue gun unattended during use.
Never carry the glue gun by the (a)
Always remain (a) when using the hot glue gun
When should you keep a clean workspace
Before the project
After the project
Always
When I feel like it
Should you point the hot glue gun at someone else?
Never.
Only if they made fun of me
All the time
Is the glue coming out of the hot glue gun hot?
Yes! That's why it's called hot glue.
No.
Should you put anything other than hot glue sticks into the back of the hot glue gun?
Absolutely not, the Hot Glue Gun will break
Yes
If it is clogged
What is the immediate action to take if you burn yourself with a hot glue gun?
Apply a bandage
Run your hand under cold water and inform the teacher
Ignore it and continue working
Apply ice directly to the burn
When cutting with a box cutter, where should your non-cutting hand be positioned?
Directly in front of the blade's path
To the side or above the cutting line
Holding the material loosely
Behind the material being cut
When can you operate a machine (scroll saw, styrofoam cutter, etc.) WITHOUT a teacher's permission?
If you used a machine just like it elsewhere
Never use a machine without your teacher's permission
If you practiced at home
If the teacher is not looking
What should you do to long hair to prevent it from getting caught in a machine?
Cut it short
Tucked into your shirt
Tie it back
Braid it
What should you do to a machine when you are done with it?
Shut it off
Leave it on for the next person
When you cut material on a scroll saw or styrofoam cutter, you should keep the material flat on the table surface of the machine
TRUE
FALSE
The hot wire styrofoam cutter is ONLY used with which material?
Brick
Metal
Plastic
Foam (styrofoam)
If you take out a tool, what is your responsibility?
Hide it when you are done
Leave it on a table when you are done
Use it as it was intended to be used and put it back clean when finished
How fast does the styrofoam hot wire cutter heat up?
Immediately
In a few minutes
It does not head up, it has a blade that moves
Very Slowly
All accidents, regardless of the size should be reported________
After the class period is over
By the end of the period
Immediately
Which of the following is NOT permitted at any time during clean up?
Vacuuming
Sweeping
Working on your project
Which of the following is not permitted in the lab at anytime and could result in the removal from the lab and/or a loss of privileges
Running
Horseplay
Interrupting someone using the machine
All of the above
What is the correct way to unplug an electrical tool?
Leave it plugged in at all times
Grip the plug firmly and pull it straight out
Yank the plug out quickly
Pull the cord from a distance
