NEW
Font size
WorksheetsCAMD LAB PE, 3RD SEMESTER,GROUP-01
Total questions: 20
Worksheet time: 15mins
Which file extension is used for SolidWorks part files?
.SLDASM
.SLDPRT
.SLDDRW
.PRT
Which file extension is used for SolidWorks drawing files?
.DRW
.SLDDRW
.SLDPRT
.SLDASM
Which of the following is NOT a default plane in SolidWorks?
Front Plane
Right Plane
Top Plane
Side Plane
The default planes (Front, Top, Right) intersect at:
The origin point
The graphics area center
The model edge
A random point
If you create a sketch on a new plane and then hide that plane, what happens to the sketch?
The sketch also hides automatically
The sketch remains visible in the graphics area
The sketch gets deleted
SolidWorks shows a rebuild error
To make a hollow cylinder with equal wall thickness, the best feature is:
Cut-Extrude
Shell
Hole wizard
Offset Surface
You are designing a hydraulic piston in SolidWorks. To model the main piston body, which feature would you use first?
Revolved Boss/Base using a half-profile
Extruded Boss/Base from a circle
Lofted Boss/Base between two profiles
Dome feature on both ends
If you revolve a triangle around its edge but forget to close the sketch, what will SolidWorks show?
A solid cone
A surface body (open)
An error
A truncated cone
You need to design a ball bearing sphere of 25 mm diameter. Which sketch and feature should you use?
Full circle + Extrude
Semicircle + Revolve 360°
Circle + Dome
Circle + Sweep
Need designed an M12 bolt, but now it must be M10.
Question: What is the easiest SolidWorks modification?
Edit sketch dimensions of shaft and head
Delete and redraw
Scale entire part
Extrude cut again
Tina needs two bolts symmetrically placed on a component.
Question: What is the most efficient approach in SolidWorks?
Sketch both separately
Extrude each sketch independently
Sketch one bolt → Mirror
Sweep along a path
Neha is designing a bolt-nut pair. The bolt diameter is 12 mm, and the nut inner diameter is 12.2 mm.
Question: Why is this slight clearance important?
Cosmetic only
Reduces strength
Ensures easy assembly without jamming
Makes SolidWorks rebuild faster
Ishita is starting the knuckle joint design.
Question: Which plane is best for the first sketch of the eye end?
Front or Top Plane (perpendicular to pin axis)
Right Plane
Any plane works
Plane doesn’t matter
Rohit wants to lock the pin after assembly.
Question: Which feature models the locking mechanism?
Sweep fork
Loft pin
Extrude small hole for cotter pin
Shell eye end
Karan has designed one fork. The joint requires two symmetric forks.
Question: Best SolidWorks method?
Sketch second fork manually
Mirror feature/part along plane
Sweep fork along path
Duplicate
Riya has completed a 3D model of a knuckle joint. She now wants to create a drawing for manufacturing.
Question: Which view should she choose as the front view in drafting?
The view showing maximum length and features
Any random view
The smallest face of the model
Top view only
Riya notices that some internal holes in her part are not visible in the front view.
Question: What should she do to show them?
Use shaded view
Add a note
Draw them manually
Enable hidden lines visible
Karan is creating a drawing for a company in India.
Question: Which projection standard should he use?
Third-angle projection
Oblique projection
First-angle projection
Perspective projection
Deepak’s front view of a shaft does not show its axis.
Question: Which SolidWorks feature should he use?
Enable shaded mode
Insert → Sketch
Insert → Annotations → Centerline
Use manual line
Shreya wants to make the drawing more understandable for beginners.
Question: What can she add to the drawing?
front view
Total view
Exploded view only
Isometric view in the corner
