NEW
Font size
WorksheetsAutoCAD and Construction Concepts Worksheet
Total questions: 25
Worksheet time: 13mins
When using the TRIM command, which do you select first?
Select all
The cutting edges
The object to be trimmed
None
How does a polar array create new objects?
In a circular pattern
In a grid pattern
In a rectangular pattern
In a straight line
How should you organize your drawing in autocad?
Create layers.
Select the appropriate Snap.
Set up the Dimstyle.
All of these.
Which of the following AutoCAD command would you used frequently to the draft the Typical CHB Wall Footing Details?
Hatch Command
Line Command
Mirror Command
Trim Command
In drafting the Typical CHB Wall Footing what size of the rebars should you used for its lateral ties?
12 mm
14 mm
16 mm
18 mm
What type of line will represent a Column Footings in the drawing of a foundation plan?
Continuous
Hidden
Phantom
Section
What command in Autocad would you use to convert the edges of iron bar from intersecting into curves?
Chamfer
Explode
Fillet
Trim
What command should you used to change the settings of the dimension in Autocad?
DEC
DDIM
DIMALIGN
DIMCEN
In drafting the Foundation plan what is the standard thickness of the external wall of a two storey house Plan?
.10m
.15m
.20m
.25m
In drafting the Foundation plan what is the standard thickness of the internal wall of a bongalow house plan?
.10m
.15m
.20m
.25m
Which command does not belong to the group?
Copy
Line
Mirror
Trim
Which is not a function of offset command?
Offset is probably one of the most useful commands for constructing drawings.
The offset command can be used to change the size of an object or group of objects.
You can offset lines, arcs, circles, ellipses, 2D polylines, xlines, rays and planar splines.
The Offset command creates a new object parallel to or concentric with a selected object.
Which is not a part of roof plan?
Beams
Purlins
Rafters
Ridges
Which is an example of a foundation?
Combined
Isolated
Spread
Wall
Which is not included in the design of Floor and Roof Framing Plan?
Foundation Plan
Roof Framing Plan
Typical Slab Detail
Truss connection
Given the length of the Footing of 1.2 meters what should be the depth of the footing from the finished ground line?
1 meter
2 meters
3 meters
4 meters
From the layout of typical column and footing details given the dimension of 1.2 sq. meters. What is the thickness of the column?
0.1 m X 2 m
0.2 m X .3 m
0.2 m X 4 m
0.3 m X 0.3 m
What is the horizontal intersection between two or more roof planes and represents the highest point of a roof.
Rafter
Ridge
Purlins
Truss
Which of the following has frame work, typically consisting of rafters, posts, and struts, supporting a roof, bridge, or other structure?
Rafter
Ridge
Purlins
Truss
Which of the following describes vertical height of a roof?
Eave
Ridge
Rise
Run
If you would project 45 degree angle in line. What setting will you turn on?
Turn on the OSNAP.
Turn on The GridLines.
Turn on the Orthomode.
Turn on the Polar Track.
What bar should be used in creating the slab details?
Use 7 mm Ø rebar
Use 8 mm Ø rebar
Use 9 mm Ø rebar
Use 10 mm Ø rebar
What setting will be set in the Primary Units in the number of decimal places?
1
2
3
4
What does scaling do to objects?
Stretches them
Duplicates them
Makes them bigger
Makes them smaller
How would you present your drawing?
Plot your drawing.
Create a printed copy.
Draw the Column Footing Details.
Present the important details of plan.
