wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Philippine Agricultural Engineering Standards Quiz

Total questions: 44

Worksheet time: 22mins

Name
Class
Date
1.

Which related structures are included in the scope of the standard?

a)

Bridges and tunnels

b)

Drainage, slope protection, and erosion control

c)

Traffic lights and signs

d)

Pedestrian crossings

2.

Which organization is mentioned as having a standard specification for highways, bridges, and airports?

a)

National Irrigation Administration (NIA)

b)

Department of Public Works and Highways (DPWH)

c)

Infrastructure for Rural Productivity Enhancement Sector (INFRES)

d)

Agrarian Reform Infrastructure Project Phase II (ARISP-II)

3.

What are aggregates as defined in the document?

a)

Granular material of mineral composition such as sand, gravel, shell

b)

A layer of soil used for planting

c)

A type of chemical used in construction

d)

A structural component of specified thickness

4.

What is the purpose of backfill in construction?

a)

To replace other materials removed during construction

b)

To provide a decorative finish

c)

To act as a drainage system

d)

To support vegetation growth

5.

What is a base course according to the document?

a)

A layer of aggregate, soil-treated aggregate, treated soil, or soil aggregate

b)

A type of bridge structure

c)

A drainage system component

d)

A decorative surface layer

6.

What is the function of compaction in construction?

a)

To apply pressure to aggregates to result in a dense mass

b)

To remove unwanted materials from the ground

c)

To create a decorative surface

d)

To support plant growth

7.

What is a culvert as defined in the document?

a)

A drainage structure that may or may not directly support and extends across and beneath a highway street

b)

A type of bridge used for pedestrian traffic

c)

A decorative garden feature

d)

A type of soil treatment

8.

What is the product resulting from the mechanical crushing of gravel called?

a)

Drainage

b)

Earthwork

c)

Crushed Gravel

d)

Grubbing

9.

Which process involves the removal of water from the road area using culverts and ditches?

a)

Excavation

b)

Drainage

c)

Grading

d)

Erosion Control

10.

What is the act of cutting, digging, or scooping to remove material known as?

a)

Grubbing

b)

Excavation

c)

Gradation

d)

Earthwork

11.

What term describes the slope of a roadway, channel, or natural ground?

a)

Gradient

b)

Grade

c)

Grading

d)

Gradation

12.

What is the process of removing and disposing of trees and other unwanted materials below the ground surface called?

a)

Grubbing

b)

Excavation

c)

Erosion Control

d)

Drainage

13.

What is the definition of a "lane roadway"?

a)

A roadway with a single lane for traffic

b)

A roadway divided into two or more clearly marked lanes for vehicular traffic

c)

A roadway made of gravel

d)

A roadway intended for pedestrian use only

14.

Which of the following materials is used in masonry?

a)

Asphalt

b)

Stone, brick, concrete block, or concrete

c)

Gravel

d)

Sand

15.

What is the purpose of riprap?

a)

To provide a smooth surface for vehicles

b)

To prevent erosion and preserve the shape of a surface

c)

To mark lanes on a roadway

d)

To support agricultural products

16.

What is a "road shoulder" used for?

a)

As a main travel lane for vehicles

b)

As an emergency stopping area for vehicles

c)

As a pedestrian walkway

d)

As a parking area for bicycles

17.

What is the function of a "roadway embankment"?

a)

To divide lanes on a highway

b)

To provide a foundation for pavement

c)

To raise the structure of soil, soil aggregate, sand, or rock

d)

To serve as a pedestrian path

18.

What is the purpose of salvage materials in construction?

a)

To create new materials for construction

b)

To save existing materials for use in other projects

c)

To dispose of waste materials

d)

To enhance the aesthetic value of a building

19.

What do specifications in construction documents typically include?

a)

Only the cost of materials

b)

A list of workers involved

c)

Technical descriptions of materials and workmanship

d)

The timeline for project completion

20.

What is the function of a subbase course in road construction?

a)

It is the top layer of the road

b)

It is a decorative layer

c)

It is a layer above the sub-grade and below the base course

d)

It is used for drainage

21.

What is a turn-out section used for in roadways?

a)

For parking vehicles

b)

For emergency stops and allowing slow-moving vehicles to pull out

c)

For pedestrian crossings

d)

For toll collection

22.

What is the preferred angle of intersection for a proposed roadway with an existing road?

a)

30 degrees

b)

45 degrees

c)

60 degrees

d)

90 degrees

23.

Which type of road is NOT mentioned under the road carriageway section?

a)

Earth Road

b)

Gravel Road

c)

Asphalt Road

d)

Concrete Road

24.

What is the minimum slope required for earth, gravel, and bituminous roads?

a)

1%

b)

2%

c)

3%

d)

4%

25.

What is the maximum slope allowed for concrete roads from the center line towards the ditch?

a)

1.5%

b)

2.0%

c)

3.5%

d)

4.0%

26.

What is the minimum width required for a road shoulder?

a)

0.5 meters

b)

1.0 meter

c)

1.5 meters

d)

2.0 meters

27.

What is the maximum slope of a road shoulder from the edge of the road carriageway?

a)

2%

b)

3%

c)

4%

d)

5%

28.

What is the maximum recommended embankment height if no specific reason is provided?

a)

1 meter

b)

50 cm

c)

75 cm

d)

100 cm

29.

What is the minimum radius design for curvature on flat terrain?

a)

150 meters

b)

500 meters

c)

50 meters

d)

320 meters

30.

What is the acceptable range for the angle of intersection?

a)

30-45 degrees

b)

45-60 degrees

c)

60-75 degrees

d)

75-90 degrees

31.

What is the required visibility range for a roadway with a speed limit of 96 kph?

a)

40 meters

b)

50 meters

c)

320 meters

d)

500 meters

32.

What is the maximum longitudinal slope allowed for rolling terrain according to the document?

a)

8%

b)

10%

c)

12%

d)

15%

33.

What is the normal side slope ratio mentioned in the document?

a)

2:1

b)

3:1

c)

4:1

d)

5:1

34.

What is the range for the cross fall (crown) as specified in the document?

a)

0.5 – 1.0%

b)

1.0 – 1.5%

c)

1.5 – 2.0%

d)

2.0 – 2.5%

35.

Which type of road is NOT mentioned under the clearing and grubbing section?

a)

Earth Road

b)

Gravel Road

c)

Asphalt Road

d)

Concrete Road

36.

What is the measurement height for determining the diameter of a tree for payment purposes?

a)

1.0 meters above the ground

b)

1.4 meters above the ground

c)

1.5 meters above the ground

d)

2.0 meters above the ground

37.

According to Table 1, what is the designation for a tree with a diameter over 900 mm?

a)

Small

b)

Medium

c)

Large

d)

Extra Large

38.

In the context of the document, what does a "lump-sum basis" imply for Clearing and Grubbing?

a)

Measurement of area is required

b)

No measurement of area is required

c)

Only tree height is measured

d)

Only tree diameter is measured

39.

Which of the following is not listed as a type of road under the Excavation section?

a)

Earth Road

b)

Gravel Road

c)

Asphalt Road

d)

Concrete Road

40.

What is included in roadway excavation according to the document?

a)

Only the removal of unsuitable materials

b)

Excavation and grading for roadways, intersections, and waterways

c)

Only the excavation of igneous rocks

d)

Only the disposal of organic matter

41.

What does unclassified excavation consist of?

a)

Excavation of only sedimentary rocks

b)

Excavation and disposal of all materials regardless of nature

c)

Excavation of materials under specific pay items

d)

Only the removal of muck

42.

Which type of excavation involves the removal of saturated or unsaturated mixtures of soils and organic matter?

a)

Rock Excavation

b)

Common Excavation

c)

Muck Excavation

d)

Unclassified Excavation

43.

What is the characteristic of rock excavation?

a)

It involves only the removal of organic matter

b)

It includes excavation of rocks that cannot be excavated without blasting

c)

It is classified under common excavation

d)

It involves only the removal of soil

44.

What is the difference between Case I and Case II borrow excavation?

a)

Case I involves materials from unspecified sources

b)

Case II involves materials from sources designated on the Plans

c)

Case I involves materials from sources designated on the Plans

d)

Case II involves materials from unspecified sources