wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

ESD with Illumination

Total questions: 15

Worksheet time: 4mins

Name
Class
Date
1.

A type of lighting system where light flux more or less uniformly distributed to all direction

a)

Direct Lighting system

b)

Indirect Lighting System

c)

General Diffuse Lighting System

d)
Directional lighting system
2.

Lifespan of Low Pressure Sodium lamp

a)
18,000 to 24,000 hours
b)
25,000 to 30,000 hours
c)
10,000 to 15,000 hours
d)
5,000 to 8,000 hours
3.

Part of Low Pressure Sodium lamp responsible for emitting yellow light

a)
Sodium carbonate
b)
Sodium hydroxide
c)
Sodium vapor
d)
Sodium chloride
4.

A type of lamp that is also called SOX lamp

a)
Low-pressure sodium lamp
b)
Metal halide sodium lamp
c)
Incandescent sodium lamp
d)
High-pressure sodium lamp
5.

A type of discharge lamp that produces light from an electric arc inside a pressurized arc tube containing sodium and other gases

a)
Halogen incandescent lamp
b)
Sodium vapor lamp
c)
Mercury vapor lamp
d)
Fluorescent tube light
6.

A glass component that houses the internal assembly of a sodium lamp

a)
Light bulb housing
b)
Glass casing
c)
Glass envelope
d)
Sodium chamber
7.

Mercury Vapor Lamp is a type of lamp that

a)
is a type of lamp that uses incandescent bulbs.
b)
is a solid-state lamp that emits LED light.
c)
is a fluorescent lamp that operates on high voltage.
d)
is a gas discharge lamp that produces light using mercury vapor.
8.

Pair of metal rod that placed at both ends of the arc tubes that releases electrons to start and maintain the electric arc

a)
Conductors
b)
Insulators
c)
Transistors
d)
Electrodes
9.

A semiconductor device that emits light when an electric current passes through it

a)
Photovoltaic cell
b)
Transistor amplifier
c)
Resistor network
d)
Light-emitting diode (LED)
10.

An interconnection wire bond between anode and cathode

a)
Interconnection wire bond between anode and cathode.
b)
Electrical wire bond between cathode and anode.
c)
Bonding wire connection from cathode to anode.
d)
Connection wire link between positive and negative terminals.
11.

A zone on tunnel lighting on which constant and moderate lighting is maintained for drivers safe driving. Typically uses 30 - 50 lux for every 7 - 10 meter spacing

(a)  

12.

The distance measured horizontally between the outer of the column or wall face or lamp post and the center of the luminaires

(a)  

13.

The total amount of visible light emitted by a source, measured in lumens (lm)

(a)  

14.

The intensity of light emitted from a surface per unit area in a given direction

(a)  

15.

A metric used to compare light output to energy consumption. efficacy is measured in lumens per watt

(a)