NEW
Font size
Worksheetsoctober monthly test 2025 1st yr
Total questions: 36
Worksheet time: 13hrs 44mins
What is the name of part marked as ‘X’?
बटन
Power On/OFF
button पावर ऑन/ऑफ बटन
Zero setting button जीरो सेटिंग बटन
LED/ LCD display एलईडी/एलसीडी डिस्प्ले
Meteric/ Inch button मीट्रिक/इंच बटन
What is the name of instrument?
यंत्र का नाम क्या है?
Outside micrometer बाहरी माइक्रोमीटर
Inside micrometer अंदरूनी माइक्रोमीटर
Digital micrometer डिजिटल माइक्रोमीटर
Depth micrometer गहराई माइक्रोमीटर
What is the feature measured with vernier caliper?
वर्नियर कैलिपर के साथ कौन सी विशेषता मापी जाती है?
answer choices
Measuring external/बाहरी मापन
Measuring internal/आंतरिक मापन
Measuring depth/गहराई मापन
Measuring angle/कोण मापन
How to select a vernier caliper for reading a vernier caliper for reading a
measurement?
वर्नियर कैलिपर के माप पढ़ने के लिए वर्नियर कैलिपर का चयन कैसे करें?
Accuracy
Size of the job
Accuracy needed
and size of the job
Vernier caliper size
What is the main use of vernier height gauge?
वर्नियर ऊंचाई गेज का मुख्य उपयोग क्या है?
Measuring मापन
Checking जांच
Reading पढ़ना
Marking मार्किंग
Which of the following is a static characteristic of measurement systems?
Dynamic error
Speed of response
Measuring lag
Accuracy
What is the purpose of calibration?
To improve the design of the instrument
To enhance the sensitivity of the instrument
To adjust the instrument to a standard
To increase the measurement range
Which instrument is specifically designed for checking the conformity of threaded parts?
Dial Caliper
Screw thread gauge
Depth gauge
Plug gauge
What does a plug gauge measure?
Voltage
Diameter of holes
Thickness of coatings
Air pressure
A dial caliper combines the capabilities of which two tools?
Vernier caliper and micrometer screw gauge
Height gauge and depth gauge
Feeler gauge and dial indicator
Vernier caliper and dial indicator
What is the unique feature of a depth micrometer compared to a standard micrometer?
It can measure electrical resistance
It has a digital display
It measures the depth of holes or recesses
It measures temperature
What TOOLS do we use to MEASURE how LONG things are?
BALANCE SCALE
RULERS, METER STICKS, TAPE MEASURE
THERMOMETERS
we can use it to measure the length of classroom
Tape measure
Metal Tape
Measuring cylinder
Common balance
What is this?
Metal tape
Measuring ruler
Measuring cylinder
Balance
Which unit is suitable for measuring the small lengths such as the length of the pen or the sides of a book.
Kilo meter (Km)
Meter (m):
Centimetre (cm)
These are ------------------ tools.
other tools for communication and research
observation
measuring
safety
A digital multimeter typically displays readings using:
A moving pointer
Graphical bars
LED lights
Colored figures
Which of the following is a function of a voltmeter?
Measure electric current
Measure electric potential
Measure electrical resistance
Measure cable connections
Which instrument is used for measuring electric current in amperes?
Voltmeter
Ohmmeter
Logic Probe
Milliameter
What is the main difference between an analog and a digital multimeter?
Display type
Measurement functions
Voltage range
Weight and size
What does an ohmmeter measure?
Electric potential
Electric current
Electrical resistance
Cable connections
Classification of measuring instruments: ......
1.Mechanical.
4.Absolute,secondary,
null and deflecting.
2. Mechanical and Electronic.
3.Mechanical, Electronic and electrical.
grams, kilograms, miligrams
lux
decibels
rpm
scales / mass
A unit for measuring the sound.
mm
kg
decibels
lux
A device for measuring the rate at which something turns
mm
rpm
lux
decibels
What is the reading on the vernier calipers?
16.01 mm
16.10 mm
16.02 mm
16.20 mm
What is the reading on the vernier calipers?
16.01 mm
16.10 mm
16.02 mm
16.20 mm
What is the correct reading of the Vernier calipers?
3.6 mm
3.06 mm
3.58 mm
3.56 mm
The reading of the micrometer is .............................
2.38mm
2.88mm
2.58mm
The part marked in red is ...
Frame
Sleeve
Lock nut
Ratchet
The part marked in red is ...
Anvil
Sleeve
Thimble
Ratchet
What is the name of the measuring instrument?
Digital micrometer
Screw gauge
Dial indicator
Depth gauge
In order to check the clearance between two mating surfaces, a ________ gauge should be used.
Feeler gauge
Radius gauge
Thread pitch gauge
Ring gauge
What is the name of the measuring instrument?
Depth micrometer
Dial height gauge
Dial vernier caliper
Digital vernier caliper
What is the use of V-Blocks?
For checking only squareness of square work pieces
For checking roundness
Only for the support purposes
To support triangular surfaces only
What is the action of ascertaining the size, amount, or degree of something called?
Calibration
Measurement
Instrumentation
Evaluation
