NEW
Font size
WorksheetsPolyPrinter and KISSlicer Refresher
Total questions: 10
Worksheet time: 5mins
Samuel, Emma, and Ava are gearing up for their first-ever 3D print adventure with the PolyPrinter! They're buzzing with excitement, but what is the very first thing they should do before diving into the rest of the setup?
Load the filament into the extruder
Power on the PolyPrinter
Apply adhesive to the build plate
Select the print file on the control panel
Liam, Samuel, and Ava are gearing up for their awesome 3D printing adventure with the PolyPrinter! As they watch, the printer starts its warm-up dance. Why is this warm-up phase so crucial before their creative project can begin?
To calibrate the printer’s axes automatically
To ensure the filament is properly loaded into the drive gear
To allow the bed and nozzle to reach the required temperature
To test the build plate’s surface adhesion pattern
Nora, Emma, and Anika are gearing up for their first 3D printing adventure with the PolyPrinter! They're ready to load the filament and kick off their creative project. What should they do first to get the filament into the printer?
Insert filament while the nozzle is cold to avoid oozing
Heat the nozzle to loading temperature before feeding filament
Pull the filament backwards through the nozzle, then reinsert
Disable the extruder motor and push filament quickly
Mia, Maya, and Benjamin are teaming up to create an awesome project with the PolyPrinter! They're excited to get started, but when is the perfect moment to apply adhesive to the build plate so their print sticks just right?
Immediately after powering on, before warm-up
Only after the print starts to ensure bonding
Before loading filament to prevent clogging
Never; adhesive is not part of preparation
Ava, Mia, and Noah are excited to print their first 3D masterpiece! As their printer warms up, which two parts need to reach the perfect temperature to ensure their creation comes out smooth and flawless?
The control panel and power supply
The filament spool and extruder motor
The bed and the nozzle
The gantry and stepper drivers
Kai, Evelyn, and David are buzzing with excitement as they prepare to launch their 3D printing masterpiece! The PolyPrinter is warmed up and the filament is loaded. What should they do next to bring their creative vision to life?
Turn the printer off to save energy, then restart
Select the print file on the control panel to begin
Apply additional adhesive over the first layer
Manually pull the filament to prime the nozzle during printing
Lily, David, and Anika are teaming up to load filament into their 3D printer for a cool project. What exciting sign should they watch for to know the filament is loaded and ready to print?
Filament retracts slightly and stops moving
Melted filament extrudes steadily from the nozzle
The bed temperature drops to room temperature
The control panel locks and becomes unresponsive
William, Priya, and Anika are gathered around their 3D printer, buzzing with excitement to see their creation come to life! But uh-oh—the bed and nozzle are still warming up and haven’t reached the right temperature yet. What’s the most likely thing that will happen next?
The printer will skip layers due to overcooling of electronics
The print may fail to adhere or extrude properly
The slicer settings will reset to defaults
The filament spool will unwind automatically
Samuel, Charlotte, and Ava are gearing up for their big project with the PolyPrinter! Which option best matches the intent of the PolyPrinter preparation checklist?
Ensure safe startup and correct materials handling before printing
Increase print speed by bypassing temperature checks
Eliminate the need for adhesives by preheating longer
Allow loading filament without heating the nozzle
William, Sophia, and Abigail are teaming up for an awesome 3D print adventure! When they pick a print file on the control panel, which important step should they have already finished?
The printer has been powered on, warmed up, and filament is loaded
Adhesive has been removed from the build plate
The nozzle has been cooled to room temperature
The bed motor has been disengaged for safety
