WorksheetsHealth & Safety Yr 9
Total questions: 20
Worksheet time: 10mins
Name
Class
Date
1.
What PPE must you wear when using machines?
a)
Gloves and boots
b)
Goggles and apron
c)
Helmet and earplugs
d)
Mask and scarf
2.
Where should your fingers be when using machines?
a)
Close to moving parts
b)
Away from moving parts
c)
On the machine belt
d)
Pressing the work hard
3.
How should you feed work into a machine?
a)
Push hard and fast
b)
Ease work gradually
c)
Drop it in quickly
d)
Hold loosely
4.
How many people should be inside the yellow safety zone?
a)
Two people
b)
Three people
c)
Only one person
d)
No restriction
5.
Where should your work be kept on the linisher?
a)
On the floor
b)
On the metal table
c)
Against the belt directly
d)
Hanging in the air
6.
What materials should NOT be sanded on the linisher?
a)
Wood
b)
Glue, plastic, or metal
c)
MDF
d)
Plywood
7.
What part of the linisher must you keep fingers away from?
a)
The motor
b)
The rotating belt
c)
The table edge
d)
The switch
8.
What is another name for the bandfacer?
a)
Belt sander
b)
Linisher
c)
Disc grinder
d)
Drum polisher
9.
How should you support your work when polishing?
a)
With one hand
b)
With both hands
c)
Using a clamp only
d)
With gloves only
10.
Where should you hold your work relative to the polishing mops?
a)
Above the mops
b)
Below the mops
c)
At the side of the mops
d)
Anywhere you like
11.
What should you polish on the machine?
a)
Anything you want
b)
Only what you are instructed
c)
Any metal object
d)
Plastic items
12.
How should you hold work when drilling?
a)
With bare hands
b)
In a machine vice
c)
Using a clamp loosely
d)
Pressing down hard
13.
When should you operate the pillar drill?
a)
When safety guards are removed
b)
When safety guards are in place
c)
Anytime
d)
Only if the drill bit is loose
14.
At what pace should you drill?
a)
Fast and hard
b)
Slow and steady
c)
Very fast for speed
d)
Random speed
15.
Why should you take breaks when drilling?
a)
To rest your arms
b)
To clear swarf from the drill bit
c)
To cool the motor
d)
To check the table height
16.
Why is PPE important in the workshop?
a)
To look professional
b)
To protect against hazards
c)
To follow fashion
d)
To keep clothes clean only
17.
What is the main reason for the yellow safety zone?
a)
To decorate the floor
b)
To keep the area clean
c)
To prevent accidents
d)
To mark machine ownership
18.
What should you do if you are unsure about a machine?
a)
Guess and try
b)
Ask your teacher
c)
Watch others and copy
d)
Ignore instructions
19.
Why should you never rush machine work?
a)
It looks unprofessional
b)
It can cause accidents
c)
It wastes time
d)
It makes the machine dirty
20.
What is swarf?
a)
A type of clamp
b)
Metal shavings from drilling
c)
A safety guard
d)
A polishing mop
100 %
