Braking applications produce large amounts of heat, so the brake fluid used ________.

Different lever designs can be engineered to alter the brake pedal effort required of the driver by using different levels of:

All of the following are primary components of the disc brake system, EXCEPT:

Combination valves may contain the following:

Technician A states that quick take-up master cylinders were created for drum brake systems. Technician B states that quick take-up master cylinders was created for disc brake systems with low drag brake calipers. Who is correct?

________ carry brake fluid from the master cylinder to the brake units.

On some pads, the depth of the groove is set so:

________ slows a vehicle by converting the vehicle's kinetic energy into electrical energy.

Tech A says that calipers use steel piston rings to seal each piston. Tech B says that calipers use a square section O-ring to seal each piston. Who is correct?

Most modern master cylinder reservoirs are equipped with a low brake fluid level float switch that turns on the ________light on the instrument panel and/or sets a notification on the driver information system.

True or False: If brake fluid boils, it turns from a vapor to a liquid, which is compressible.

The electrically integrated caliper style parking brake uses a(n)______ mounted on the caliper to directly apply the brakes.

Tech A says that DOT 5 brake fluid should be used in all vehicles today because it is silicone based and will not absorb water. Tech B says that DOT 4 and DOT 3 are not recommended for use in ABS systems. Who is correct?

If brake fluid is below the minimum level in the reservoir, __________.