Font size
WorksheetsNET8
Total questions: 36
Worksheet time: 19mins
You are trying to access a music sharing service on the Internet. The service is located at the IP address 173.194.75.105. You are experiencing problems connecting.
You run a trace route to the server and receive the output shown in the following image:
Each hop in the trace route is a switch.
The trace route completed with an unknown status.
Each hop in the trace route is a router.
The trace route completed successfully.
Each hop in the trace route is a router.
The trace route completed unsuccessfully.
What command is used to add static routes to a windows computer?
a. nslookup
b. telnet
c. route
d. nbtstat
What command do you use to display the routing table on a local system?
a. route display
b. route table
c. route local
d. route print
Which command shows the public IP information for a certain domain name?
a. netstat
b. nslookup
c tracers
On a Windows computer, which utility should you use to determine whether your Domain Name System (DNS) service is properly resolving fully qualified domain names (FQDNs) to IP addresses?
A. netstat
B. nslookup
C. nbtstat
D. ipconfig
Which setting is used to determine the Domain Name System (DNS) settings on a client computer?
A. TELNET
B. NSLOOKUP
C. PATHPING
D. NETSTAT
On a Windows computer, which utility should you use to determine whether your Domain Name System (DNS) service is properly resolving fully qualified domain names (FQDNs) to IP addresses?
a. ipconfig
b. nbtstat
c. nslookup
d. Netstat
You are studying for finals in the student lounge. When your laptop is connected to the wireless network, access to the internet is slow. When you connect to the network by using an Ethernet cable, you can no longer access the internet. You run the ipconfig /all command. The results are shown in the image.
Evaluate the image and complete the statements by selecting the correct option from each drop-down list.
Note: You will receive partial credit for each correct selection.
Conținutul comenzii ipconfig /all afișat:
The IP address of the wireless adapter is configured: through manually
The IP address of the Ethernet adapter is configured: through APIPA
The IP address of the wireless adapter is configured: through DHCP
The IP address of the Ethernet adapter is configured: through APIPA
The IP address of the wireless adapter is configured: through APIPA
The IP address of the Ethernet adapter is configured: through DHCP
What command do you use to connect to a remote computer so that you can execute commands?
a. ftp
b. nslookup
c. telnet
d. nbstat
What command can you use to connec to a mail sever so that you can test SMTP?
a. ftp
b. nslookup
c. telnet
d. nbstat
What command do you use to display and modify the network configuration of a local computer?
a. netsh
b. netstat
c. telnet
d. nbtstat
You receive a call from a family member who is unable to connect to a game server.
You learn that the server's IP is 172.16.2.11.
To help, you ping the server and receive the information shown in the following image:
The server did not return your ping requests.
The server status is unknown.
The server did return your ping requests.
The server status is up.
The server did not return your ping requests.
The server status is down.
The server may or may not have returned your ping requests.
The server status is unknown.
___ is the command you run to view your IP information on a Windows PC?
a. ifconfig
b. netconfig
c. ipconfig
What command do you use to display the MAC address on system?
a. ipconfig/all
b. pathping –m
c. route /showmac
d. nbstat -r
What command do you use to register the computer’s name and IP address with the nearest DNS server?
a. ipconfig /renew
b. ipconfig /renew aall
c. ipconfig /flushdns
d. ipconfig /registerdns
What command do you use to retrieve or update your DHCP assigned configuration?
a. ipconfig /flushdns
b. ipconfig /all
c. ipconfig /release
d. ipconfig /renew
The ipconfig command will :
a. Configure routers
b. Configure DHCP clients
c. Display a client’s address
d. Display a client’s broadcast mode
Which command should you use to force a client computer to renew its address lease from a DHCP server?
A - pathping
B - ipconfig
C - netstat
D - netsh
What command do you use to release the IP configuration handed out by a DHCP server?
a. ipconfig/renew
b. ipconfig /releasedns
c. ipconfig /savestatic
d. ipconfig /release
What command do you use to reacquire IP configuration from a DHCP server?
a. ipconfig/renew
b. ipconfig /releasedns
c. ipconfig /savestatic
d. ipconfig /release
The ping tool is used to: (Choose two.)
A. Determine the network portion of a host address.
B. Self-test a host's own network interface.
C. Determine whether a host is reachable.
D. Manage a host's session when UDP is used.
The ping utility is used for which two purposes? Choose 2
A - determine whether a host is reachable
B - resolve host name to IP address
C - search for duplicate address
D - self-test a host's own network interface
E - scan for open host firewall ports
Which command is used to verify that a server is connected to the network?
A. IPCONFIG
B. ROUTE
C. PING
D. CHECK
What option do you use to ping constantly until you stop it?
a. ping –t <host>
b. ping –q <host>
c. ping –r <host>
d. ping –s <host>
The ipconfig command will:
A. Configure routers
B. Display a client's address
C. Display a client's broadcast mode
D. Configure DHCP clients
You run the ipconfig command. The output is shown in the following image:
From these settings, you can tell that the computer:
A. Will have limited Internet access
B. Will have full Internet access
C. Will not be able to access the Internet
D. Will not be able to access the local network
You have a computer whit an address of 169.254.32.23 and a subnet mask of 255.255.0.0, yet you cannot connect to your local file servers. What is most likely the problem?
a. it cannot communicate with a DHCP server
b. the DNS servers specified are incorrect or are down
c. NetBIOS over TCP/IP has not been enabled
d. The network card is not connected properly to the network
A user reports that she cannot connect to network resources from a computer on the company network. The user was able to connect to the network resources yesterday. You verify that the user's computer is properly physically connected to the network. You discover that the computer's IP address is 169.254.48.97.
You need to restore access to network resources. What should you do next?
A. Flush the cache on the DNS server.
B. Reset the user's password on the server.
C. Check your router's current routing tables.
D. Verify that the DHCP service is available.
In Linux, which command-line tool should you use to list a host's active incoming connections?
A. dig
B. netstat
C. ip addr
D. host
Which command shows all ports and incoming connects?
a. netstat
b. nslookup
c tracert
You are setting up a network computer game.
You need to open up ports on your firewall so your friends can join the network.
Which command displays the ports that your computer is listening for?
A. nslookup
B. nbtstat
C. ping
D. netstat
What command display Ethernet statistics?
a. netstat -e
b. netstat -x
c. netstat -q
d. netstat –t
Which command shows the hops or routers along a certain route?
a. netstat
b. nslookup
c tracert
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
The tracert command displays router addresses that are traversed between a source and a destination.
The tracert command determines packet loss between a source and a destination.
The tracert command can display a list of routers being used for all active connections.
Tracert is used to:
A. Manage routing tables dynamically.
B. Manage session-oriented connections between nodes.
C. Report the route taken by packets across an IP network.
D. Report the shortest route between different networks.
Which command shows the public IP information for a certain domain name?
a. netstat
b. nslookup
c. tracert
